Tender For Proposed Civil, Interior, And Allied Works For Setting Up Of Cancer Day Care Unit At First Floor Of Existing Laundry Building, Sainath Hospital, Shirdi., Tq - Rahata, Dist - Ahilyanagar (Maharashtra)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Sep 2026
5 days left
EMD
20000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Civil, Interior, And Allied Works For Setting Up Of Cancer Day Care Unit At First Floor Of Existing Laundry Building, Sainath Hospital, Shirdi., Tq - Rahata, Dist - Ahilyanagar (Maharashtra)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.(SSR 22-23 page no.296 item no 46.09) |
| 2 | Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x240x150)mm in extra fine jointing mortar of fixoblock of in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete (SSR 22-23 page no201. item no29.05) |
| 3 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete (SSR 22-23 page no209. item no32.01) |
| 4 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.(SSR 22-23 page no.212 item no32.34) |
| 5 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.(SSR 22-23 page no225. item no35.21) |
| 6 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.(SSR 22-23 page no227. item no36.12) |
| 7 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.(SSR 22-23 page no.227 item no36.11) |
| 8 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box with necessary scaffolding.(SSR 22-23 page no.251 item no39.38) |
| 9 | Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered.(SSR 22-23 page no.256 item no39.52) |
| 10 | Full Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.(SSR 22-23 page no.447 item no52.49) |
| 11 | Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,(SSR 22-23 page no.356 item no51.27) |
| 12 | Providing and or fixing EKO TIMBER equivalent factory made extruded WPC Single / PVC (Wood Plastic Composite) solid flush plain door shutter of thick ...mm size comprising of polymer virgin of K value 58-60 (suspension carbonate and natural fibres (Wood powder only) and non toxic additives having minimum of density 550/kg cum to 650/kg cum. And screw withdrawal strength 1800 N (face) and 900 N (Edge) minimum compressive strength 50 N Sq.mm., modulus of elasticity 850 N sq.mm. and resistant to spread of flame of class A category with property of being termite l borer proof / water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, s.s. screws, all inclusive as per direction of Engineer complete (with prior approval of concerned grade), calcium -in- charge etc. Superintending Engineer |
| 13 | Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery(SSR 22-23 page no359. item no51.42) |
| 14 | Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish(SSR 22-23 page no359. item no 51.44) |
| 15 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR 22-23 page no178. item no 25.11) |
| 16 | Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.(SSR 22-23 page no174. item no23.11) |
| 17 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)(SSR 22-23 page no174. item no38.34) |
| 18 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete(SSR 22-23 page no.216 item no33.34) |
| 19 | Providing and fixing factory-made/solid-core plywood flush door shutter of approved make, conforming to relevant IS specifications, of 35 mm to 40 mm overall thickness, comprising seasoned and chemically treated timber/engineered wood core, covered with 1.0 mm thick approved make decorative laminate on both faces, complete with BTC patti/beading of approved size and profile, properly fixed with suitable adhesive and mechanical fasteners with necessary door hardware and fittings, including heavy-duty SS/MS hinges, tower bolts, mortise lock, handles, door stopper, aldrops, screws, fasteners,visible glass panel with 3mm glass and other accessories as required for complete and proper functioning of the door. |
| 20 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR 22-23 page no.181 item no22.50) |
| 21 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(SSR 22-23 page no.188 item no26.33) |
| 22 | Material and BuildBody Material: High-grade 304 stainless steel (16-gauge to 18-gauge) for rust resistance and durability.Design: Seamless welded construction with coved, rounded corners to eliminate bacteria-trapping crevices.Station Type: Single-user bay. Approximate Size: 24 to 30 inches wide, 20 to 24 inches front-to-back, and 34 to 36 inches high (deep basin to accommodate scrubbing up to the elbows).Mounting Type: Wall-hung installation utilizing a heavy-duty, hidden 14-gauge stainless steel mounting bracket or chair carrier system capable of supporting over 130 kg (300 lbs). Operation Mode: Mechanical foot-pedal assembly with knee operated, typically dual-pedal (one for hot water, one for cold water) or a single-pedal blended water control valve mounted near the floor base. Width: 28 to 32 inches (710 to 812 mm) for a comfortable single-user clearance.Basin Profile: Deep, sloped bottom with a radius-coved interior to ensure rapid drainage and minimize splashback(SSR 22-23 page no. item no) |
| 23 | Note :- Rates quoted by the bidder shall be inclusive of all taxes, GST and services & scope of work as mentioned in tender document Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender