Tender For Repair And Maintenance Of Submersible Pumpsets In Existing Borewells At Ward No 1 To 21 In Poonamalle Municipality
Tender Value
15 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Submersible Pumpsets In Existing Borewells At Ward No 1 To 21 In Poonamalle Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Supply and renewal PVC insulated and sheathed 3 Core Flat type copper cable confirming to IS 694/1990 including cost and conveyance of materials and labour charges for fixing and testing etc., complete a)1.50 sq.mm 3 core flat type copper cable |
| 2 | 2.50 sq.mm 3 core flat type copper cable |
| 3 | 4.00 sq.mm 3 core flat type copper cable |
| 4 | 6.00 sq.mm 3 core flat type copper cable |
| 5 | Supply and renewal L.T Cables 3,4 Core 1.1 KV Grade armoured aluminum conducor cable confirming to IS 1554 PART I with ISI Marking including cost and conveyance of materials and labour charges for fixing and testing etc., complete a) 4.00 sq.mm 3 core |
| 6 | Repair of Single Phase Submersible Pumpset including cost of materials and labour charges a) UP to 2 HP coil rewainding |
| 7 | UP to 3 HP coil rewainding |
| 8 | Motor coupling |
| 9 | Motor Top bearing houshing |
| 10 | Motor Top bearing bush |
| 11 | Motor Top bearing Sleeve |
| 12 | Motor bottom bearing housing |
| 13 | Motor bottom bearing Sleeve |
| 14 | Carbon segment |
| 15 | Trust bearing Top |
| 16 | Trust bearing bottom |
| 17 | Pump Top bearing bush |
| 18 | Pump Top bearing Sleeve |
| 19 | Impeller 1Hp to 3Hp |
| 20 | Pump Bowl 1Hp to 3Hp |
| 21 | Distance Bush |
| 22 | Diffuser Housing |
| 23 | Impeller Bush G.M |
| 24 | Motor Upper bearing |
| 25 | Motor Lower bearing |
| 26 | Painting charges for the pumpset |
| 27 | Transporting charges for the pumpset |
| 28 | Removal Charges for submersible pumpset |
| 29 | Re-Erection Charges for submersible pumpset |
| 30 | Repair of 3-phase submersible pumpset including cost of materials and labour charges a)5 HP coil rewainding |
| 31 | 7.5 HP coil rewainding |
| 32 | 10 HPcoil rewainding |
| 33 | Motor copupling |
| 34 | Motor Top bearing houshing |
| 35 | Motor Top bearing bush |
| 36 | Motor Top bearing Sleeve |
| 37 | Motor bottom bearing housing |
| 38 | Motor bottom bearing Sleeve |
| 39 | Carbon segment |
| 40 | Trust bearing Top |
| 41 | Trust bearing bottom |
| 42 | Discharges casing |
| 43 | Pump Top bearing bush |
| 44 | Pump Top bearing Sleeve |
| 45 | Impeller 2Hp to 2oHp |
| 46 | Pump Bowl 2Hp to 2oHp |
| 47 | Distance Bush |
| 48 | Diffuser Housing |
| 49 | Impeller Bush G.M |
| 50 | Motor Upper bearing |
| 51 | Motor Lower bearing |
| 52 | Painting charges for the pumpset |
| 53 | Transporting charges for the pumpset |
| 54 | Removal Charges for submersible pumpset |
| 55 | Re-Erection Charges for submersible pumpset |
| 56 | Panel Board repair: including cost of materials and labour charges a)1 No - Volt Coil |
| 57 | Ammerer Selector switch |
| 58 | Contract Point Set Kit |
| 59 | Over load relay unitset |
| 60 | 30A Fuse carrier set |
| 61 | Supply and delivery of following PVC, GI Pipes and Specials including cost and conveyance of pipes with accessories to site etc., complete a)50 mm upvc pipes |
| 62 | Supply delivery and Fixing of Nylon Rope for bor well Including Cost and conveyance of material and labour charges for Laying and Jointing of pipes, Testing and labour charges etc., |
| 63 | Rate for flushing fo borewell of 6\\" dia requiring less than 4 hours operation using drill rods/hose with required sizof pipes for vrious capacity compressor including transportation, labour, and fuel charges for compressors as directed by the departmental officer etc. complete. 600 Cfm (100/150 PSI) |
| 64 | Supply and renewal of G.M. Gate valves including cost and conveyance of materials and labour charges for fixing and testing etc., complete a) 50mm GM Gate Valves |
| 65 | 80mm GM Gate Valves |
| 66 | Supply and renewal of G.M. Non Return valves including cost and conveyance of materials and labour charges for fixing and testing etc., complete a) 50mm GM Non Return Valves |
| 67 | 80mm GM Non Return Valves Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender