Tender For Maintenance Of Toilet Building At Koolakkadai Bazar Street In Ward No - 25
Tender Value
7.40 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
7400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Toilet Building At Koolakkadai Bazar Street In Ward No - 25
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing damaged Flooring with Plain cement concrete including all labour charges etc., complete asper standard specification. (Sch.Item.no-w-0034) |
| 2 | Dismantling the existing damaged Pressed tile & Weathering course including all labour charges etc., complete asper standard specification. (Sch.Item.no - w-0037) |
| 3 | Dismantling the existing damaged Floor finish & dadooing walls in cement mortar withMosaic Tiles / Glazed Tiles / Clay Tiles including all labour charges etc., complete asper standard specification (S.S.R SI no- W-0042) |
| 4 | Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers. |
| 5 | Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. |
| 6 | Plain cement concrete of mix 1:3:6 using 20mm ISS size HBG metal from approved quarry including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification. |
| 7 | Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete. |
| 8 | Reinforced cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete. |
| 9 | Plain Cement Concrete 1 : 4 : 8 using 40mm gauge ISS HBG metal from approved quarry including cost and conveynace of material to site and all labour charges etc., complete as per standard specification |
| 10 | Brick work in cement 1:5 mix using well burnt country bricks of size 83/4\\"x41/4\\"x23/4\\" including all cost and conveyance etc completeas per std specification |
| 11 | Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. completeas per std specification |
| 12 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete. |
| 13 | Paving Hydraulic pressed cement Mosaic Tiles of approved colour and size 20cmx20cmx20mm finished thickness with small verona or Indian marble ( other than salem magnesite ) with cement mortar 1:3,20mm thick and pointed with the same colour cement including polishing with power polisher to a high degree of polish so as to be perfectly smooth and glossy |
| 14 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete. as per standard specification. |
| 15 | Paving the floor with ceramic tiles of size (8''x8'') 20cm x 20cm x 6 mm thick for flooring of shelf designed grooves and both way special colour tile of best quality and set in CM 1: 3,10mm thick and pointing with white cement using at the rate of 0.40Kg/sq.m including finishing the joint neatly and pointing flush with tile surface etc.complete. |
| 16 | Dadooring the walls with glazzed tiles of size 200mm x 200mm 6mm thick of best an aproved quality set in CM 1: 2 and pointed with same color cement using 0.4kg /m2 neatly including cost and conveyance all materials etc. complete |
| 17 | Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. Complete (TCMC Data 25-26=Si no:427) |
| 18 | Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of double leaves door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 01.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section-Vertical &Top rail: 50x44.45x2.50mm @ 1.292 kg/m and Bottom rail : 100 x 44.45 x 2.50mm @ 1.974 kg /m , Lock rail: 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 2Nos .,lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete complying with standard specification and as directed by the deparmental officers.. All the Alu. sections are to be anodised with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.(b.With Automatic Door closure and Hinges)(TCMC Data 25-26=Si no:473) |
| 19 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.(TCMC Data 25-26=Si no:404) |
| 20 | Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. Complete (TCMC Data 25-26=Si no:368) |
| 21 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).(TCMC Data 25-26=Si no:653-ii-a) |
| 22 | Supplying and fixing of 18\\" water closet with all cost and conveyance of materials and specials and lbour charges etc complete as per std (TCMC Data 25-26=Si no:658) |
| 23 | Supplying of following pipes and special including cost and conveyance all materials etc. complete. as per standard specification. |
| 24 | 1\\" PVC Pipe |
| 25 | 1\\" PVC Coupling |
| 26 | 1\\" PVC Tee |
| 27 | 1\\" PVC Ellbow |
| 28 | 3/4\\" PVC Pipe |
| 29 | 3/4\\" PVC Coupling |
| 30 | 3/4\\" PVC Tee |
| 31 | 3/4\\" PVC Ellbow |
| 32 | 1\\" x 3/4\\" PVC Reducer |
| 33 | 1/2\\" PVC Pipe |
| 34 | 1/2\\" PVC Coupling |
| 35 | 1/2\\" PVC Tee |
| 36 | 1/2\\" PVC Ellbow |
| 37 | 3/4\\" x 1/2\\" PVC Reducer |
| 38 | 3/4\\" G.M Gate valve |
| 39 | 1000 litre PVC tank (M-0540) |
| 40 | 15mm SD tap |
| 41 | 110mm PVC (6 Kg/cm2) |
| 42 | 110mm PVC Tee |
| 43 | 110mm PVC bend |
| 44 | 110mm PVC Ellbow |
| 45 | PVC Adhesion Solution |
| 46 | Supplying and fixing of 1.5HP jet motor of best quality including all meterial, Erection labour charges etc., complete as per standard specification |
| 47 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of followingsize , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) (TCMC Data 25-26=Si no:646) |
| 48 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22) |
| 49 | Supply and fixing OF 30W LED Street Light Fitting complete crompton make SCF 1365/EQUI WITH 25MM DIA PIPE (CLASS B) on the existing post or wall with PVC unsheathed Copper Leads MS Clamps and Aluminium Painting with65W CFL retrofit Lamp(Data D) ( SOR code-M-1290) |
| 50 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD 89) |
| 51 | Laying of PVC pipes and specials from OHT to Toilet etc., complete as per standard specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender