Tender For Providing Partition,Wall Panelling And False Ceiling Arrangements In Room No.414 At Master Plan Complex In Tiruppur District For The Office Of Honourable District Incharge Minister
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Sep 2026
1 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Partition,Wall Panelling And False Ceiling Arrangements In Room No.414 At Master Plan Complex In Tiruppur District For The Office Of Honourable District Incharge Minister
BOQ
| Sl. No. | Item Description |
| 1 | Providing laminated Wall Panelling using the following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both directions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. The laminated sheet of 1mm thick will be fixed over the plywood using adhesive / glues and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. |
| 2 | Providing fluted wall paneling made with dual extrusion process using eco polymer material designed with modern lamella shape, making it highly durable and resistance to mechanical damage along with unique thermo print technology using following support system.. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both directions with necessary screws. Fluted panel will be fixed over the frame work and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, Fluted panel and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. |
| 3 | Supply and Installation Cement Bonded Partical Board panel partition consist of Metal frame work partition comprises of Single layer, tapered edge Cement Bonded Partical Board panel partition. Partition includes inner layer of 12 mm thick Cement Bonded Partical Board panel partition on either side of the framing. GI Metal frame work, designed in compliance with & manufactured using includes 70x34x36x0.5mm GI C-Stud with lip of 6 mm and H-cutout on web enabling the services to pass, having moment of inertia 61909 mm 4 about major axis, positioned at 610mm c/c in 50x32 x32x 0.5mm GI Floor Channel & 50x32x32x0.5mm Gl Ceiling Channel with flanges bend at 5º acute angle. Floor & Ceiling Channel is anchored with Rawl plug, fixed at 600mm c/c in zig zag manner. 70x40x40x0.5mm GI Channel to be placed between the studs, behind the horizontal board joint. |
| 4 | Supplying, fabricating, erecting and fixing Hilux Board Plain Sheets (10mm thick) or Equivalent False Ceiling upto a ceiling height of 4.5m from floor level 5 as directed by the department officers. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance Etc. complete complying to standard specication. |
| 5 | Supplying and Installing Metal False Ceiling using Fire Rretardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated onexternal surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look |
| 6 | Providing Cornice Work for Gyp board False Ceiling etc., complete complying with standard specifications and as directed by departmental Officers. |
| 7 | Providing Wooden Cup-board with wooden shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter. Cupboard is partitioned and provide necessary Door arrangments using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executiven Engineer before use on work. |
| 8 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender