Tender For Supply Of Audio Systems , Dual Channel Class D Power Amplifier. 2X1200Watts Rated Output. Continuous Rated Power Stereo/Mono: 8 Ω : 700W + 700W Rms, 4 Ω : 1200 W + 1200W Rms. Thd + N: 0.1% Frequency Response: (-1Db) : 20-20,000Hz Input Sensiti
Tender Overview
Project Description
Tender For Supply Of Audio Systems , Dual Channel Class D Power Amplifier. 2X1200Watts Rated Output. Continuous Rated Power Stereo/Mono: 8 Ω : 700W + 700W Rms, 4 Ω : 1200 W + 1200W Rms. Thd + N: 0.1% Frequency Response: (-1Db) : 20-20,000Hz Input Sensitivity: 0Dbu (775Mv) & 4Dbu (1.23V) (Selectable) Input Impedance: 10K Unbalanced, 20K Balanced Damping Factor (8 Ω ): 1000 Output Connectors: Speak On 4-Way And Heavy Duty Binding Post For Each Channel. , 200Watts Wall Mount Speaker Box: Power Rating: 200W Rms/400W Frequency Response: 65-18,000Hz Nominal Impedance: 8 Ω Special At (1W/1M): 94Db Dimensions: W325 × H485 × D255 Mm , 8 Channel Mixer: Mon:Ster (Mono-Stereo) Inputs For Full Flexibility . 75Hz Low Cut On Mono Channels. 4-Band Eq On All Inputs. 3 Aux Sends (2 Pre/Post & 1 Post) With Stereo Aux Returns. 2 Sub Groups With Individual ¼ Outputs. Insert (Send/Return) On First 3 Mono Channels And Master Output. , Active Speaker: Power Output: 200W Rms / 400W Peak Frequency Response: 40 Hz - 20 Khz Maximum Spl: 121 Db Lf Drive Size: 8 Lf, 2 Vc. Inputs: 1 X Stereo Rca, 1 X Xlr-Jack (Line) & 1 X Switchable Xlr-Jack (Mic/Line). Output Connector: Balanced Xlr-M , Wall Mount Bracket: Use With Moulded Cabinet Pa Loudspeaker , 8-Channel Audio Splitter: Individual Volume Control For Each Input & Output Channel. Clip Led Indicator For Left And Right Input Signal. Operates On Ac Mains. 482.6 Mm (19) Rack Mountable In 1U Size And Usable As A Table Top Unit Also. , Gooseneck Microphone: Sensitivity: −44 ± 2Db (6.3Mv/Pa) Frequency Response (Hz): 20 - 20000 Nominal Impedance: 2.2Kω Operation Voltage: 1.0V-10V Signal To Noise Ratio: 58Db , Dual Handled Wireless Mic: Type: Dual-Uhf 200 Selectable Channels Polar Pattern: Cardioid Output: Individual Channel: Xlr Mix Out: ¼ Jack. Transmitters: 2 X 1.5V Aa Receiver: 240V Ac 50Hz For Ac Adaptor Supplied With The Set. , Single Laple Microphone: Type: Single - Uhf 200 Selectable Channels Polar Pattern: Cardioid Output: Bal. Xlr & Unbalance: ¼ Jack. Transmitters: 2 X 1.5V Aa Receiver: 240V Ac 50Hz For Ac Adaptor Supplied With The Set. , Single Laple Microphone: Type: Single - Uhf 200 Selectable Channels Polar Pattern: Cardioid Output: Bal. Xlr & Unbalance: ¼ Jack. Transmitters: 2 X 1.5V Aa Receiver: 240V Ac 50Hz For Ac Adaptor Supplied With The Set. , Supply & Running Of Cable: Cable: 1.5 Sq Mm 2-Core Copper Speaker Wire. Conduit: Pvc Pipe (Usually 20Mm Or 25Mm Diameter). , Supply & Running Of 2 Core Mic Cable In A Pvc Pipe: Cable Type: 2-Core Shielded/Screened Low-Noise Audio/Microphone Cable (Oxygen-Free Copper Conductor Recommended).Conductor Size: Usually 0.22 Mm² To 0.50 Mm² (24 To 20 Awg).Conduit Pipe: Medium-Grade Rigid Pvc Or Pvc Flexible Pipe , Connecting Cables: 3-Pin Plug, Strip The Outer Cable Jacket To Expose Three Wires. Connect The Green/Yellow (Earth) Wire To The Top/Longest Pin (E), Brown/Red (Live) To The Right Pin (L), And Blue/Black (Neutral) To The Left Pin (N) , 22 U 700 X 650 Amplifier Rack With Ft , Rt , Psu With Wheels: Dimensions & Capacity: 22 Rack Units (Ru) High (Roughly 3.8 Feet Or 42 Inches Total Height), With A Width Foot Print Of 700 Mm And A Depth Of 650 Mm. Doors (Ft & Rt): Front Toughened Glass Or Mesh Door (Ft) And A Rear Vented/Perforated Metal Door (Rt) For Security And Passive Airflow. Power (Psu/Pdu): Comes Equipped With A Horizontal Or Vertical Power Strip (Typically A Multi-Socket Pdu With Switch/Surge Protection) To Power Heavy Amplifiers.
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender