Tender For Special Repair Of Bldg No T-90, T-135, P-167 And P-188 At Naugam Under Ge 969 Ews
Tender Value
55.50 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
25 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No T-90, T-135, P-167 And P-188 At Naugam Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified. |
| 2 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. |
| 5 | M&L 2nd class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified. |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed. |
| 7 | S&F in repair wooden panelling with tongued & grooved joint laminated over high quality DHF,8mm to10mm thick fixed to timber framework in any position, complete all as specified. Note :-Timber frame work rate included in same item. |
| 8 | M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc. complete all as specified and directed. |
| 9 | M&L for PVC hollow/perforated interlocking wall/ceiling panelling of 2mm thick prelaminated PVC sheet. The panel & strips shall be of 600kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall/ceiling using 65mm long M. S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.Note: Frame work shall be included in same item. |
| 10 | Dismantling boarding ,framed work any description, fixed in any position fixed with nails complete all as specified and directed. |
| 11 | S&F 2nd class Hard wood 30 mm thick boarding in floors and skirting planed one side ,with butt joints and fixed with nails to complete all as specified and directed. |
| 12 | S&F in repairs 2nd class soft wood (kail) prelaminated wooden flooring as in boarding in floors incl 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebated as in flooring fixed with nails in floor, complete all as specified and directed.Note:Colour rand shade of tiles shall be approved by GE and contractor shall not have any claim what so ever on this account. |
| 13 | Dismantling timber scantling in fillets rails, posts purlins etc. under 40 Sqcm in section in framed work complete all as specified and directed. |
| 14 | S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed. |
| 15 | S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exceeding 6 Sq. cm & n.exc 13 Sq.cm complete all as specified and directed. |
| 16 | S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed. |
| 17 | S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed. |
| 18 | S&F 2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed. |
| 19 | Demolition of brick work, PCC block masonry, stone masonry or boulder masonry built in cement mortar complete all as specified and directed. |
| 20 | M&L brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and directed. |
| 21 | M&L for random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry, built in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L for pre-cast cement concrete block masonry with solid blocks 1:2:4, type B1 (using 20mm graded stone aggregate), exc. 10 cm in width and setting in CM 1:4, complete all as specified and directed. |
| 23 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed. |
| 24 | M&L for rendering 10mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for raised pointing to random or polygonal rubble, un coursed or brought upto courses in cement mortar 1:4 complete all as specified. |
| 26 | M&L providing, precast cement concrete 1:2:4, type B1 (using 20 mm garaged stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weathering's, throating etc. and setting in mortar complete with joints to match complete all as specified |
| 27 | Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 28 | M&L 75 mm thickness cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 29 | M&L 40 mm thickness cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 30 | M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 31 | M&L for white colour Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed base 15mm screed bed in cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 33 | S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with cement mortar 1:4 complete all as specified. |
| 34 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n.exc 4kg per sqm complete all as specified. |
| 35 | M&L hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 36 | M&L for welded steel wire fabric supplied and fixed complete to wood and steel member complete all as specified and directed |
| 37 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed. |
| 38 | S&F aluminium alloy powder coated aluminium sliding windows three track with movable shutters (sliding on minimum two PVC roller of best quality, for such shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading clips frame made with aluminium section as appended below :-(a) Window Frame - 75mm x 35mm x 1.48mm thick..(b) Top/Bottom rail and style/rail of shutter - 38mm x 19mm x 1.48mm thick and cover (c) Aluminium beading / clips - 0.7mm thick.(d) Stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e) Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 39 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sadhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 40 | S&F aluminium partition wall of powder coated aluminium hollow sections members of size 63.50mmx38mmx1.48mm with distance of vertical hollow section, 1.2 mtr to 1.8 mtr having top rails, bottom rails and middle rails of size 63.5mm x 38mm x 1.48 mm and upto middle rails wall panels shall be covered by 5mm glass thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1.0 mtr from floor and remaining portion above middle rail shall be provided with 5mm glass incl approved designed with aluminium strips/beadings with rubber gasket as per existing or as per provided complete all as specified and directed. |
| 41 | S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed. |
| 42 | S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. and fitted to chowkhats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc. are provided with stiles and rails, complete all as specified. |
| 43 | S&F MS cold rolled Butt hinges medium weight 75 mm long complete all as specified. |
| 44 | S&F aluminium anodised barrel tower bolts, 75 mm long complete all as specified. |
| 45 | S&F aluminium anodised handles, cast type anodised 125 mm long complete all as specified. |
| 46 | Taking down shutters shutters of any description exc 1 sq. m but not exc 2 Sqm each complete all as specified and directed. |
| 47 | S&F plain, framed, panelled shutters thickness 35 mm of 2nd class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 48 | S&F MS butt hinges 100 mm medium weight, cold rolled mild steel complete all as specified and directed., |
| 49 | S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 50 | S&F aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 51 | S&F aluminium handles 150 mm , cast type, anodised complete all as specified. |
| 52 | S&F aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 53 | S&F aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed. |
| 54 | M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 55 | S&F 2nd class softwood 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and directed. |
| 56 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 including screwing and welding to existing wooden/steel windows complete all as specified and directed. |
| 57 | S&F in repairs 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish, complete all as specified. |
| 58 | S&F in repairs 500 ltrs capacity rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed. |
| 59 | S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc. complete all as specified and directed. |
| 60 | Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified and directed. |
| 61 | Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc. complete all as specified and directed. |
| 62 | Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 63 | Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 64 | S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified and directed. |
| 65 | S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified and directed. |
| 66 | S&F in renewal of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe all as specified. |
| 67 | S/F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified. |
| 68 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified. |
| 69 | S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified. |
| 70 | S&F aluminium anodised barrel tower bolts, 75 mm long complete. |
| 71 | S&F aluminium anodised handles, cast type anodised 125 mm long complete. |
| 72 | S&F aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 73 | M&L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden doors and windows frames complete all as specified and directed.. |
| 74 | S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 75 | S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete of approved make complete all as specified and directed. |
| 76 | S&F in repair 10mm thick toughened glass, edged polished around, fixed type alongwith powder coated aluminium anodised frame size 85 x 44 x 1.98 including SS cleat and necessary hardware ,making good of wall surface to match existing surface complete all as directed by Engr-in-Charge. |
| 77 | S&F Vitreous china squatting pan \\"Orissa pattern\\" size 580x440 mm white with integral foot rest(excluding flushing cistern and flush pipe) including connection to trap, etchant to flushing pipe 90 mm long, sntysyponage pipe, etc., complete making good to floor complete all as specified and directed. |
| 78 | S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified. |
| 79 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed. |
| 80 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed. |
| 81 | S&F in repair 15 mm bore angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 82 | S&F central hole basin mixer brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair complete all as specified and directed. |
| 83 | S&F wall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair complete all as specified and directed. |
| 84 | S&F of bib tap chromium plated in repair of 15 mm dia bore, screwed for iron pipe, or for brass ferrule complete all as specified and directed. |
| 85 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 86 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 87 | S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed. |
| 88 | S&F in repair vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor with adjacent floor finishing and making connection to flush pipe etc. complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. Make of WC (Hindware Cat No. 92043 (INOX) and CERA-COMFY Cat Part No. 2075/Parryware |
| 89 | S&F in repairs for 15 mm bore in repair bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule complete all as specified and directed. |
| 90 | S&F stop/angle valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed, chromium plated complete all as specified and directed. |
| 91 | S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified. |
| 92 | S&F central hole basin mixer brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair complete all as specified and directed. |
| 93 | S&F wall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair complete all as specified and directed. |
| 94 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 95 | S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 96 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubing complete all as specified and directed. |
| 97 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flanges complete all as specified and directed. |
| 98 | S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed. |
| 99 | S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms) complete all as specified and directed. |
| 100 | S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms) complete all as specified and directed. |
| 101 | S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 102 | Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc. or for shafts, wells, manholes etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil complete all as specified and directed. |
| 103 | Returning filling in incl spreading levelling, watering and well ramming in layers n exc 25 cm of loose and soft soil all as specified. |
| 104 | Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point complete all as specified and directed. |
| 105 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 106 | Rendering 10mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 107 | Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc. complete all as specified and directed. |
| 108 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed. |
| 109 | M&L cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified and directed. |
| 110 | S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc. complete all as specified and directed. |
| 111 | S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc. complete all as specified and directed. |
| 112 | S&F 110 mm bore PVC (SWR) bends with access door etc. complete all as specified and directed. |
| 113 | S&F 75 mm bore PVC (SWR) bends with access door etc. complete all as specified and directed. |
| 114 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified and directed. |
| 115 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified and directed. |
| 116 | M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified. |
| 117 | M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement complete all as specified. |
| 118 | M&L preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified. |
| 119 | M&L for applying of 3mm thick wall care putty on wall surfaces etc. complete all as specified station policy/as directed by Engr-in-Charge. Note - Wk will be requisitioned based on wk order and paid as per site and user requirement. |
| 120 | M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on new plastered surfaces of walls complete all as specified and directed. |
| 121 | M&L for providing cement concrete 1:3:6, type C1 (using 20mm graded stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as in 75mm thick plinth protection complete all as specified and directed. |
| 122 | Taking down carefully copper/aluminium point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.complete all as specified and directed. |
| 123 | M&L point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit concealed in wall/ceiling all accessories such as bends, elbow, reducers, junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc., including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly, One light/ceiling fan/Exhaust fan point controlled by one switch complete all as specified and directed, for the following :- Note: Contractor must do internal wiring with chisel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15mm in wall/ceiling and make surface good as it is. |
| 124 | All as per ser Item No 123 here-in-before but for One switch socket combination 5 Amps on independent board. |
| 125 | All as per ser Item No 123 here-in-before but for One switch socket outlet 5 Amps on same board with other switches. |
| 126 | M&L point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit concealed in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc., including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with chisel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 127 | M&L point wiring complete with FRLS 1100 Volts grade, 4 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit concealed in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc., including 4 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly complete all as specified and directed. Note: Contractor must do internal wiring with chisel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 128 | S&F in ceiling rose surface Bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block complete all as specified and directed. |
| 129 | S&F in LED light fitting mirror type with high out put diffuser 2 feet, 10 Watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 130 | S&F in modular switch single pole one way 6 Amps 1 module 240 V,complete all as specified and directed. |
| 131 | S&F in modular docket, 6A - 2/3 pin combined 2 module 240 V,complete all as specified and directed. |
| 132 | S&F in modular switch socket combination 16A, 6 pin, 3 module 240 V, complete all as specified and directed. |
| 133 | S&F in modular white cover plate with frame, 8 module complete all as specified and directed. |
| 134 | S&F in modular white cover plate with frame, 3 module complete all as specified and directed. |
| 135 | S&F in lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings, complete all as specified and directed. |
| 136 | S&F in 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 Amp to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 137 | S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 63 Amps SPN in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 138 | S&F in repair MCB DB 12 way sheet metal enclosure SPN 240 Volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. |
| 139 | S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity TPN 100 Amps in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 140 | S&F in repair TPN DB 4 way sheet metal enclosure TPN 450 volts, 50 Hz, with IP-42 protection, Double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. |
| 141 | S&F in repair LED bulb thread/pin type of capacity 10 Watts, complete all as specified and directed. |
| 142 | S&F LED luminaire 600 mm x 600 mm, 35/36 Watts, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 143 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 144 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300 mm complete all as specified and directed. |
| 145 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed. |
| 146 | M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checkouts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc. |
| 147 | S&F in repair sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 Volts of sizes 6.0 Sqmm through existing/ new in wall with PVC conduit including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. Note:- Two runs of sub main wire including earth wire and rigid non metallic PVC conduit shall be measured as one unit per RM make of cable Contractor must make wall/ceiling chisel cutting and after fixing make surface good as it is. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender