Tender For Welcome And Day To Day Maintenance Of Certain Bldgs In Cpe Itarsi At Adm Area Cpe Itarsi Under Ge Bhopal
Tender Value
10 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome And Day To Day Maintenance Of Certain Bldgs In Cpe Itarsi At Adm Area Cpe Itarsi Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n exc 1.50 sqm each including making good area all as specified and directed. |
| 3 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each including making good all as specified and directed. |
| 4 | Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site all as specified and directed. |
| 5 | Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each all as specified and directed. |
| 6 | Supply and fixing for pressed steel frame for doors with one or more rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed. |
| 7 | Supply and fixing for pressed steel frame for doors with one or more rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed. |
| 8 | M& L cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in back filling of frames complete all as specified and directed. |
| 9 | Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required cutting exceeding half brick but not exceeding one brick complete. |
| 10 | Supply and fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed. |
| 11 | Supply and fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 12 | Supply and fixing for 35 mm thick 2nd class hard wood glazed and skeleton shutter’s for door open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed. |
| 13 | Supply and fixing for factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels complete all as specified and directed. |
| 14 | S&F aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified. |
| 15 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 16 | S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. |
| 17 | S&F butt hinges 100mm long, long, medium weight cold rolled mild steel, and fixed etccomplete all as specified and directed. |
| 18 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 19 | S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors . |
| 20 | Resecuring or easing & adjusting without taking down shutters of any description not exc 1.00 sqm each |
| 21 | Resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each |
| 22 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. |
| 23 | Hacking out old broken glass panes of any thickness description from wooden frame or stone concrete or steel frame,or brick surrounds, glazed with putty or fixed with beads and prepared to receive new glas panes complete all as specified . |
| 24 | S&F 3mm sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm eachcomplete all as specified and directed. |
| 25 | S&F 3mm sheet frosted glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm each complete all as specified and directed. |
| 26 | S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 27 | Supply and fix in repairs mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.18mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 28 | Supply and fixing in repairs 25 mm dia chromium plated steel drapary curtain rod with bracketes including necessary drilling holes and fixing with rawl plug and suitable screw in wall including designer dom for curtain rod complete all as specified and directed. |
| 29 | Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) any type and any position complete all as specified and directed. |
| 30 | Dismantling floor hearh or ,wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 31 | Material and labour for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble), complete all as specified and directed. |
| 32 | Material and labour for ceramic (Non skid) tiles area of each tile exc 0.11 sqm but n exc 0.18 sqmx7 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick pigment to match the colour of screed in cement mortar 1:6 complete all as specified and directed. |
| 33 | Material and labour for any coloured glazed ceramic tiles size of tiles 450x300x7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4 complete all as specified and directed. |
| 34 | Material and labour for any coloured vitrified tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 as in floors set and jointed in neat cement slurry over and inclsq. muding 15 mm thick screed bed in cement mortor 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and directed |
| 35 | Material and labour for any coloured any vitrified tiles size 600 x 600mm x 9 mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 10 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 36 | M&L of 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20 mm thick screed bed in cement mortor 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and directed. |
| 37 | Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 20 graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. |
| 38 | Material and labour for 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring, pavement, hardstanding, harstanding shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen and 3 parts sand), finished the surface fair and even complete all as specified and as directed. |
| 39 | M&L for PCC (1:4:8), 75mm thick, type D2 using 40mm grade aggregated as in base complete all as specified and as directed. |
| 40 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer- in -charge. |
| 41 | M&L for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed. |
| 42 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed including removal of debris complete. |
| 43 | Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed. |
| 44 | Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as specified and directed. |
| 45 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 46 | M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.Note : water proofing compound shall be paid separately. |
| 47 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 48 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 49 | Material and labour for 10 mm rendering in cement mortar (1:3) to ceiling and similar work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 50 | Material and labour for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed |
| 51 | Material and labour for two coat of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed. |
| 52 | Material and labour for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces all as specified and directed. |
| 53 | S&F in repairs bib taps 15mm dia, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed in reps complete all as specified and as directed. |
| 54 | S&F in repairs 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified. |
| 55 | S&F in repairs 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and as directed. |
| 56 | S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and as directed. |
| 57 | S&F tubular, towel rail brass chromium plated 20mm dia D type 60cm long between flanges with brackets complete all as specified and as directed. |
| 58 | Supply and fixing in repairs chromium plated brass shower roses 125mm size (approved by Engineer-in-Charge) fixed in repair to steel pipe as union complete all as specified and directed. |
| 59 | S&F in repair vitreous china squatting pan orissa pattern size 580 x440mm white with integral footrest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor all as specified and directed. |
| 60 | Supply and fixing in repair Vitreous china EWC 'P' or 'S' Trap , white including Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC. Complete making good to floor fixing bolt all as specified and directed. |
| 61 | S&F in repairs PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern complete all as specified and as directed. |
| 62 | S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 63 | S&F in repairs chromium plated jet spray/health faucet (ABS body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specifiedand as directed. |
| 64 | Supply and fix in repair chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe Complete all as specified and as directed. |
| 65 | S&F in repairs Wash basins, vitreou china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length all as specified. |
| 66 | S&F PVC connections 15mm dia and 450mm long with PTMT nuts complete all as specified and directed. |
| 67 | S& F 32mm polyethylene and unplasticised PVC waste pipe for wash basin/sink and urinal complete all as specified and directed. |
| 68 | Supply and fixing in repairs 100 mm dia PTMT/CP grating with waste hole complete all as specified and directed. |
| 69 | S&F 600x450x5mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building or commercial plywood and fixed with to wooden plug with chromium plated brass screw and cup washer. |
| 70 | S&F in repair PVC bath cabinet with mirror 350x450mm, complete all as specified. |
| 71 | S & F in repair CP mixer 15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete |
| 72 | S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard bard railing 60 cm long complete. |
| 73 | S & F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 1.00 mm thick fixed with stainless steel screw and rawl plug complete all as specified and directed. |
| 74 | S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 75 | Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed. |
| 76 | Taking up or down 20mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed. |
| 77 | Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed. |
| 78 | Refixing 20mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed. |
| 79 | S&F 15mm dia GI tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in flors all as spd and directed. |
| 80 | S&F 20mm dia GI tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as spd and directed. |
| 81 | M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed by Engr-in-Charge. Note : Any damage to FV, pipe etc shall be make good by the contractor. |
| 82 | All as per item No.80.00 here-in-before above but capacity of tanks exc. 500 ltr and nexc. 1000 Ltr complete all as specified and directed by Engr-in-Charge. |
| 83 | Supply and fix in repair moulded polythene water storage tank of 500 ltr capacity (3 layered) hosted and fixed in position and float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and incl (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms) and Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed. |
| 84 | Supply and fix in repair moulded polythene water storage tank of 1000 ltr capacity (3 layered) hosted and fixed in position and float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and incl (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms) and Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed. |
| 85 | Supply and fix in repair HDPE/plastic water storage tank lid/tank cover complete all as directed. |
| 86 | S&F in repair 15mm float valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe screwed for iron pipe and fixed. Minimum weight 142gms complete all as specified and directed |
| 87 | S&F in repair 20mm float valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight 210gms as specified and directed. |
| 88 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 89 | Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 90 | S&F 18/19mm Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and board fixed to timber/steel frame work with screw including if any damaged/broken of existing surface during the fixing arrangement of cabinet and making good existing surface with the same material complete all as specified and directed. |
| 91 | S&F 12mm thick plywood No 7 grade veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws as cupboard shutter to timber/steel frame work complete all as specified and directed. |
| 92 | S&F100mm long hasp and staple, mild steel, wire type, aluminium anodised, including bolt to hinges plate and fixed with screws. |
| 93 | S&F Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails on 18/19 block board complete all as specified and directed. |
| 94 | S&F Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails on 12mm thick plywood complete all as specified and directed. |
| 95 | S&F 30mmthick continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) ,fixed with steel screw complete all as specified and directed. |
| 96 | S&F for stainless steel clip on soft close clip on 3D hydraulic concealed hinges for full overlay door as kitchen cabinet complete all as specified and directed by Engr-in-charge |
| 97 | M&L for preparation of old plastered/unplastered surfaces of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of white wash on wall all as specified & directed by Engr-in-Charge. |
| 98 | All as per ser item No. 96.00 here-in-before but one coat of white wash on ceilling complete all as specified and directed. |
| 99 | M&L for complete removal of old existing tratment on plastered surface of wall including washing down, rubbing and prepration for two coat distemper oil emulsion over and including 1 mm thick JK Birla wall care putty to make the surface even and smooth. complete all as specified and directed by engr-in-charge. |
| 100 | M&L for preparation of old decorated brick/concrete, plastered/ unlplastered surfaces of walls, pillars, cornices by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of old distempered surfaces and applying one coat of distemper oil emulsion, white or tinted on wall complete all as specified and directed |
| 101 | M&L for preparation of old decorated brick/concrete, plastered / unlplastered surfaces of walls, pillars, cornices by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of old cement base painted surfaces and applying one coat of cement base paint complete all as specified and directed. |
| 102 | M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including preparation of old painted wooden surfaces of all as specified and directed. |
| 103 | All as per item No.101.00 here-in-before above but on steel surfaces. Including trusses and purlins. |
| 104 | Deduct Schedule of credit (calculation will be done off line) Rs. 10385.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender