Tender For Special Repair To Building No Sp- 30 (Ifa) At 216 Transit C At Bb Cantt, Srinagar.
Tender Value
49.29 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
15 days left
EMD
98600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Sp- 30 (Ifa) At 216 Transit C At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminum zinc coating GI based semi-corrugated (or plain in ridge) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as & Including dismantling plain or corrugated steel sheeting of any gauge,thickness, complete all as specified and directed. |
| 2 | M&L for wrought Second class hard wood in scantlings including dismantling of old unservicsable timber scantling 40sqcm and over in section, complete all as specified and directed. |
| 3 | M&L for Khatamband pattern false ceiling design as approved by GE with ornamental wood work made out of 6 mm thick deodar wood, cutting holes for ceiling lights and having two coats of varnish (Make: touch wood of asian paint or equivalent) over a coat of natural wood primer. The Khatamband to be fixed over and including 12 mm thick BWR plywood over timber scantling frame work of size 600 mm x 600 mm with second class hardwood 75 mm x 50 mm as main joist and 50 mm x 50 mm secondary joist fixed with nails/screws and finally finishing with french polish (two or more coats), complete all as specified and directed. |
| 4 | S&F Second class hard wood moulding exc. 6 Sqcm but n exc 13 sqcm as in cornices, picture rails including two coats of varnish, complete all as specified and directed. |
| 5 | M&L for 8 mm thick PVC laminated gypsum board fixed or laid over suitable Anodised aluminium snap grid frame work for false ceiling as per manufacturer's instructions all as specified size of grid 605x605mm including dismantling Wall & Ceiling board, complete all as specified and directed. |
| 6 | M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including demolition of old brick work & stone work built in cement mortar, complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surface in CM (1:4) finished fair & even, complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surface in CM (1:4) finished fair & even, including takingdown old cement plaster of any thickness, complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surface in CM (1:6) finished fair & even, complete all as specified and directed. |
| 10 | M&L for preparation of new surfaceof walls and applying two coats oil bound distemper over coat of suitable primer, complete all as specified and directed. |
| 11 | M&L for preparation of old surface of walls and applying two coats oil bound distemper over coat of suitable primer, complete all as specified and directed. |
| 12 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface etc including complete removal of exisitng treatment, complete all as specified and directed. |
| 13 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces of walls etc including complete removal of exisitng treatment, complete all as specified and directed. |
| 14 | M&L for Coloured Glazed ceramic tiles of size 450x 350x 7 mm thick as in skirting dado, vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile and including 10 mm thick rendering in cement mortar 1:4, including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed. |
| 15 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 and including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 16 | M&L for Vitrified tiles 9-10 mm thick (square/ rectangular) any shade, (ultracharged/ double charged/nano tech / digital tiles as approved by user, polished, size 0.60 m x 1.20 m in floors /walls etc. set and jointed in neat cement slurry and pointed with suitable grout as per manufaturer's instruction with suitable spacers provided to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in CM 1:4,Including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing) etc, complete all as specified and directed. |
| 17 | M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) 100 mm thick as in sub base and including 25 mm thick plain cement concrete 1:2:4 type B-1 using 12.5 mm graded crushed stone aggregate for raising of floor, complete all as specified and directed. |
| 18 | M&L for clean sawn Second class hard wood planks or any other member of any thickness in floor ,wall panels ,or in any position, complete all as specified and directed. |
| 19 | S&F 32 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, complete all as specified and directed. |
| 20 | S&F 25 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, complete all as specified and directed. |
| 21 | Providing and fixing PP-R Gate valves(brass insert) as per requirement of the site of 25 mm nominal bore, complete all as specified and directed. |
| 22 | Providing and fixing PP-R Gate valves(brass insert) as per requirement of the site of 32 mm nominal bore, complete all as specified and directed. |
| 23 | M&L for preperation of new /old on wooden Surfaces of any descri-ption, over 10cm in width or girth , not other wise described and applying two coats of synthetic enamel paint , over a coat of pink primer, complete all as specified and directed. |
| 24 | M&L for wooden prelaminated flooring of size 1200 x 200 x 8-10 mm thick including 8mm BWR Plywood cornices & fillets fixed with adhesive, cushion & any other accessory reqd as per manufacturer's instructions including necessary leveling using filler material including dismantling of old wooden flooring alongwith its fittings, complete all as specified and directed. |
| 25 | S&F 6mm thick Plywood, grade BWR, fixed with screws/nails in any position, complete all as specified and directed. |
| 26 | M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 27 | S & F Hollow PVC Wall lining /panelling on walls/ceiling consisting of 5mm thick Plain colour PVC sheet incl all PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall with suitable frame work including dismantling of old wall panels, complete all as specified and directed. |
| 28 | M&L for 10-12 mm thick 1st class soft wood Australian wooden wall paneling including fillets & cornices, fasterners and all other accessories over 6 mm thick BWR plywood fixed over necessary timber scantling and frame work incl two coat of varnishing, french polishing and prepration complete all as specified and directed.Note:- Rates for dismantling old panelling/boarding of any description and disconnecting of electrical boards, DBs, switches or any other electrical appliances etc and installation after completion of work is included in this item rate. |
| 29 | M&L for Reinforced cement concrete Type B1 1:2:4 using (20 mm graded crushed stone aggregate) for Slabs supported on walls,beams and columns in floors,roofs, landings,balconies,canopies, deck slabs and in shelves and the like including necessary formwork and demolition, complete all as specified and directed. |
| 30 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends,for manhole cover handle and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 31 | M&L for repair, 18 mm thick pre polished mirror finish granite stone slabs laid over 15 mm thick screed layer or bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rounding /moulding /bull nosing the exposed edges, including demolition of stone slab, complete all as specified and directed. |
| 32 | S&F in repair Vitreous China One Piece EWC , white including all accessories, seat cover, bolts, flushing cistern, CP Health faucet, complete all as specified and directed. |
| 33 | S & F in repair CP steel grating with /without hole of 75/100mm dia, complete all as specified and directed. |
| 34 | S&F in repair Vitreous China Urinal, Half stall type, white including waste pipe, coupling, CP Urinal spreader and all accessories, complete all as specified and directed. |
| 35 | S&F Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer fixed in repair, complete all as specified and directed. |
| 36 | S&F in repair 15 mm dia Bib taps, CP Fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 37 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 38 | S&F in repair 15 mm angle valve/stop valves, CP Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 39 | Taking down chowkhats/frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed. |
| 40 | Taking down frame with shutters ( without taking off shutters from frame ) exc 1.5 Sqm but n exc 4 sqm each, complete all as specified and directed. |
| 41 | S&F Second class hardwood plain solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 42 | S&F 30mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood, complete all as specified and directed. |
| 43 | S&F, 3mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane including hacking out old broken glass ( any thickness, size, quality or description) from wooden/ aluminium/steel frames or stone,concrete or brick surrounds , glazed with putty or fixed with beads, complete all as specified and directed. |
| 44 | S&F 30 mm thick Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 45 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm wood grain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 46 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, complete all as specified and directed. |
| 47 | S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed. |
| 48 | S&F Butt hinges of size 100 mm, medium weight, cold rolled mild steel, and fixed ,complete all as specified and directed. |
| 49 | S&F Aluminium anodized, barrel tower bolt 150mm long of extruded section, complete all as specified and directed. |
| 50 | S & F 300mm mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 51 | S&F 150 mm extruded aluminium alloy handles ,fabricated type, complete all as specified and directed. |
| 52 | S & F aluminium powder coated ventilators made of the following specifications :-(Net external size of ventilator shall be measured. Following items are included in this unit rate.)(a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick.(b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber).(c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips.(d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel.(e) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering, OBD etc. |
| 53 | S&F in repair 25-30 mm dia Curtain Rods, mild steel (coloured - in wood finish or any other colour approved by user) with suitable fixing brackets and 02 x decorative Finials for each curtain rod and all other accessories, complete all as specified and directed. |
| 54 | M&L plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) 75 mm thick, as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete all as specified and directed. |
| 55 | S&F rotational moulded polythylene water storage tank 1000 litres capacity (Cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position incl tank connection nipple, all other accessory and ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25mm dia and fixed & also including dismantling of old water tank, complete all as specified and directed. |
| 56 | S & F aluminium powder coated sliding window made of the following specifications :-(Net external size of window shall be measured. Following items are included in this unit rate.) |
| 57 | Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. |
| 58 | Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. |
| 59 | Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.00 mm thick glass with suitable EPDM beading and locking clips arrangement. |
| 60 | Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 9(c) |
| 61 | Aluminium powder coated grill of weight not less than 1.10 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. |
| 62 | Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering, OBD and exterior emulsion etc. |
| 63 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including Dismantling, complete all as specified and directed. |
| 64 | M&L for Plain cement concrete 1:3:6 Type C2 using (40 mm graded crushed stone aggregate) in foundations, filling and mass concrete including demolition, complete all as specified and directed. |
| 65 | Trimming / cutting of all trees, bushes, vegetation or any other hurdle etc all around bldg upto 3m from outer wall and its disposal to any distance as directed to facilitate the repair work, complete all as specified and directed. |
| 66 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed . |
| 67 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes 1.2 mm thick or heavy duty PVC box and duly fixed it concealed in wall and overed to top with electro plated 3 mm thick plastic laminated sheet for housing/mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc, complete all as specified and directed for the following :- |
| 68 | One light point / fan point /Exhaust fan controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 69 | One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 70 | One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 71 | Description all as per serial item No 61 here-in-before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed. |
| 72 | Supply and fixing modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed. |
| 73 | Supply and fixing modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 74 | Supply and fixing ceiling rose, 3 phase/PVC /Polycarbonate, isolated body, complete all as specified and directed. |
| 75 | Supply and fixing modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. |
| 76 | Supply and fixing modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. |
| 77 | Supply and fixing LED tube light fitting of 1x 20W/22W 220V AC batten type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, complete all as specified and directed. |
| 78 | Supply and fixing recessed/ceiling concealed/ surface mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15Watt to 18Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting, complete all as specified and directed. |
| 79 | Supply and fixing recessed / ceiling concealed mounted flate slim panel square shape with LED luminaire panel type fitting suitable for of size 600 mm x 600 mm of rating capacity in 35W/36 Watt 220 volt AC recessed type with high efficiency PMMA didduser soft glare free light with driver, holder & LED lamps complete light fitting set all as per existing fitting type/ size of sample /model and make and suitable used for roof ceiling and required fitting 6500 K complete set providing of suitable type of flate fexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting, complete all as specified and directed. |
| 80 | S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 81 | Supply and fixing LED street light fitting of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection, complete all as specified and directed. |
| 82 | Supply and fixing sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 83 | Description all as per serial No 73 here-in-before but Distribution board of rating SPN 8 way, complete all as specified and directed. |
| 84 | Supply and fixing MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed. |
| 85 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete, complete all as specified and directed. |
| 86 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed.Note: 3 runs of 6 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 87 | Description of all as per serial No 77here-in-before but 2 Run of 10 sqmm and 1 Run of 10 sqmm, complete all as specified and directed. |
| 88 | Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 16 sqmm 2 core, complete all as specified and directed. |
| 89 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 35 sqmm 3.5 core, complete all as specified and directed. |
| 90 | Supply and fixing 40 mm DWC HDPE pipe flexible and durable to protect electric cable including fitting clamp screw etc, complete all as specified and directed. |
| 91 | Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point, complete all as specified and directed. |
| 92 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 6 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 93 | Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 200 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. |
| 94 | Notes :-An amount of Rs 68,024.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender