Tender For Upgradation And Extension Of Office Of Deputy Director Ssg At Jammu. Cno-131 P
Tender Value
13.44 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
4 days left
EMD
26880
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation And Extension Of Office Of Deputy Director Ssg At Jammu. Cno-131 P
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :15.12.1 Of area of 3 sqm. and below |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 9.6.3 Second class deodar wood 35mm thickness |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):9.1.7 Sal wood |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):9.1.4 Second class deodar wood |
| 7 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.7.4 In cement mortar |
| 8 | Dismantling old damaged truss CGI sheet etc. by engaging welder with helper incl. welding set etc. complete |
| 9 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.15.23.1 For thickness of tiles 10 mm to 25 mm |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.2 In all colours, shades, except White, Ivory, Fume Red Brown |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | 9999.1781484 Providing and fixing of flush door shutters of approved make fixed with 1mm thick mica on both side complete |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.3 Suspended floors, roofs, landings, balconies and access platforms. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.16 Edges of slabs and breaks in floors and walls5.16.1.1 Under 20 cm wide |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.9.10.3 Second class deodar wood (30 mm thickness) |
| 19 | Providing and fixing 19mm thick ply (Green, Century or equivalent ) including necessary fittings, fixtures etc. complete |
| 20 | Providing and fixing 1.0mm thick mica (Green, Century or of equivalent make) |
| 21 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.3 Second class deodar wood (30 mm thickness) |
| 22 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 9.47.2 25 mm dia ( heavy type) |
| 23 | Providing and fixing aluminium works in door, windows partition of standard tubulr section. |
| 24 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete 9.56.2 100x58x1.90 mm |
| 25 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 9.60.1 300x16 mm |
| 26 | Providing and fixing bright finish SS door handles 150mm |
| 27 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. 9.116.2 Double strip (Horizontal type) |
| 28 | Renewing glass panes and re-fixing existing wooden fillets:14.8.1 Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm) |
| 29 | Providing and fixing of SS T-bolt of 8'' of approved quality and make |
| 30 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 31 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 32 | Providing and fixing 5 to 6 mm thick heavy duty of approved quality and make. |
| 33 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per thedirection of the Engineer-in-charge. |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 35 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.1 1 mm thick |
| 36 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 37 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 38 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface. |
| 39 | Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 40 | French spirit polishing, Two or more coats on new works including a coatof wood filler |
| 41 | Labour engaging for easing of doors, windows and clerestory windows |
| 42 | Labour engaging for easing of doors, windows and clerestory windows : 1 helper for 3 days |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. 13.70.1 Two or more coats on new work 13.70.2 Two or more coats on new work over |
| 44 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg./sqm. a nd coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. |
| 45 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 46 | Providing and fixing 6mm thick ply of green, century or equivalent make. |
| 47 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992with necessary screws etc. complete : 9.64.2 100 mm |
| 48 | Renewing glass panes, with wooden fillets wherever necessary : 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 49 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 50 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 51 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. 10.2.2 Welded |
| 52 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 12.58.2 110 mm diametre |
| 53 | Providing and fixing Plain bend . 110 mm |
| 54 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes12.58.1 75 mm diametre |
| 55 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. 9.8.15 12 mm thick Marine plywood conforming to IS: 710 |
| 56 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 57 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete inall respect as per directions of Engineer-in-Charge. |
| 58 | Providing and fixing vanity with basin and bottle neck trap complete |
| 59 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 60 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 61 | Demolishing mud phaska in terracing and disposal of material within 50 meters lead |
| 62 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 63 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters.9.22.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (30mm thickness) |
| 64 | Fixing chowkhat in existing opening in brick/RCC wall with dash fasteners/chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos. on each vertical member of window chowkhats), including cost of dash fasteners/chemical fasteners. |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:19.4.1 Internal work-Exposed on wall19.4.1.1 15 mm dia. nominal bore (Medium) |
| 66 | Providing and fixing on wall face un-plasticized - PVC mouldedfittings/accessories for un plasticized Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.59.3 Single tee with door12.59.3.1 75x75x75 mm |
| 67 | Providing and fixing on wall face un-plasticized - PVC mouldedfittings/accessories for un plasticized Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion.12.59.4 Single tee without door12.59.4.2 110x110x110 mm |
| 68 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels8.2.2 Granite of any colour or shade8.2.2.1 (Area of slab upto 0.5 sqm) |
| 69 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :18.11.1 Kitchen sink with drain board18.11.1.1 510x1040mm bowl depth 250mm |
| 70 | Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete. |
| 71 | Providing and fixing basin mixer Jaguar 90238 |
| 72 | Providing and fixing hand jet Jaquar 573 |
| 73 | Providing and fixing Angle valve (Jaquar No. 29053) |
| 74 | Providing and fixing Over head shower Jaquar no. 1613 |
| 75 | Providing and fixing shower arm 479Z450 |
| 76 | Providing and fixing sink mixer Jaquar |
| 77 | Providing and fixing long nose bib cock |
| 78 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 79 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 80 | Providing and laying common burnt clay (non modular) brick tiles of class designation 10 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat. |
| 81 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. 12.25.1 With common burnt clay (non modular) brick tiles of class designation 10.0 |
| 82 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase. |
| 83 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 85 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:19.4.1 Internal work-Exposed on wall 19.4.1.3 25 mm dia. nominal bore (Medium) |
| 86 | Providing and fixing brass handle 4'' |
| 87 | Providing and fixing of wall paper of superior quality |
| 88 | Providing and fixing of UV Sheet of 3mm thickness of superior quality. |
| 89 | Providing and fixing of 4mm thick teak ply of approved quality and make. |
| 90 | Providing and fixing Temporary scaffolding : 8 bamboo 25 feet long for 6 days |
| 91 | Providing and fixing temporary scaffolding : 8 ballies 10 feet long for 6 days |
| 92 | Providing and fixing temporary scaffolding : bamboo mesh 8 nos. for 6 days |
| 93 | Providing and fixing rope (coconut ) bundle |
| 94 | Providing and fixing mason : 1 mason for one days |
| 95 | Providing and fixing labour : 2 labour for one days |
| 96 | Providing and fixing POP False ceiling including fittings and fixtures etc. complete. |
| 97 | Site clearance after completion of work by engaging labour |
| 98 | Disposal of dumped mulba beyond municipal limit by way of engaging trolley |
| 99 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.2 Hot finished seamless type tubes (40 x 80 x 3 mm) |
| 100 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 andapproved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. 23.7.1 With average thickness of 120mm and minimum thickness atkhurra as 65 mm |
| 101 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. |
| 102 | 9999.1204892 P/F OF 8MM THICK LAMINATED WOODEN FLOORING (PLASTIC COATED) OF APPROVED MAKE INCLUSIVE OF ALL CARRIAGES WASTAGE COMPLETE JOB |
| 103 | 9999.3627211 Providing and fixing of Door locker link/godrej or equivalent |
| 104 | 9999.3932009 Providing and fixing name plate acrylic with alphabet of size 9\\" x 23\\" complete job. |
| 105 | 9999.3421311 Providing and fixing hand cast Ist grade POP cornice Moulding in required size, design and pattern as per directions of site-in-charge. At the junction of decorative wallpaper and texture paint with inlays pattern with compatible materials. Complete jo |
| 106 | Earthwork in bulk excavation by manual means over areas including disposal of excavated earth lead upto 50 meters and lift upto 1.5m : |
| 107 | Providing and laying vitrified full body floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments complete etc. : Size of tile : 600 x 1200 mm |
| 108 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. 9.149D.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) |
| 109 | Providing and fixing of wall hung seat of jaquar, cera or equivalent including all necessary fittings and fixtures etc. with complete job. |
| 110 | 9999.1100831 Providing and fixing of High flow diverter (Jaquar or equivalent) or of approved make, including fittings, fixtures etc. complete. |
| 111 | 9999.1009024 Providing and fixing of Towel Ring Square of Jaquar or equivalent or of approved make including necessary fittings, fixtures etc. complete. |
| 112 | 9999.2865928 Providing and fixing of Jaquar Shower Maze Round 200 MM OHS-CHR-1613 including necessar fittings, fixtures etc, complete. |
| 113 | 9999.1702203 Providing and fixing ss towel rack with sliding hooks of jaguar make. |
| 114 | 9999.1009022 Providing and fixing of following Sanitary fittings of make Jaquar/Essco/Cera Single Towel Rail 600mm |
| 115 | 9999.1024533 Providing & fixing of white vitreous china wash basin with pedestal (Hindware Cat No. 1008 + Ped Cat No. 11003 / Kerovit model No. 234 Ped Model no. 305) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaquar Cat No. 769B + Parko1535 or approved equivalent), 450mm long CP copper connections pipes (Jaquar Cat No. 803B or Parko 1535 or approved equivalent), wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. |
| 116 | Providing and fixing of 10mm thick floor mounted toughened glass sliding partition for enclosuring shower area with SS pipe as top rail and clamps including SS kn0ob and other securing attachments. Complete job. |
| 117 | 9999.3083764 Providing and fixing of concealed cistern of Superior make incl. fittings complete job. |
| 118 | 9999.3627223 Providing and fixing of 0.8mm Mica complete |
| 119 | 9999.4012183 Providing and fixing 12mm ply board incl. fixing mica sheets, as per the directions of EIC at site complete job |
| 120 | 9999.1137968 Providing and fixing of 6mm ply of approved make/quality (archid, Century, Green) including fixing carriage etc complete job as directed by EIC |
| 121 | 9999.3708379 Providing and fixing teak wood moulding complete. |
| 122 | 9999.1425367 Providing and fixing of CP GRATING including necessary fittings, fixtures etc. complete. |
| 123 | 9999.1191736 Providing and fixing PVC panelling 8mm to 10mm thick of approved specification and colour incuding fixing carriage etc complete job as directed by E.I.C |
| 124 | 9999.4277435 Providing and fixing of 24 mm thick heavy quality wpc louvers of required design ,colour and pattern of standard make including cpmer profile ,fixture,carriage ,cutting wastage ,taxes etc. complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender