Tender For Upgradation Of Secretary Quarter No. 1 At Wazarat Road, Jammu. Cno-132 P
Tender Value
10.77 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
2 days left
EMD
21540
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Secretary Quarter No. 1 At Wazarat Road, Jammu. Cno-132 P
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):sal wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). second class deodar wood |
| 4 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :second class deodar wood |
| 5 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete: |
| 6 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than10kg/sqm) |
| 7 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick |
| 10 | 2mm thick |
| 11 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 12 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and anufacture, including applying additional coats wherever required, toachieve even shade and colour. One Coat |
| 13 | Two coats |
| 14 | Painting with aluminum paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 16 | Melamine polishing on wood work (one or more coats) |
| 17 | LabouR for site clearence removal of unwanted vegetables |
| 18 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which willbe paid for separately) For the purpose of measurement the entire treated surface will be measured. |
| 19 | Easing of door window by engaging labour complete job |
| 20 | Removal of GI pipe from drain by engaging material/labour |
| 21 | Providing of following sanitary items of approved quality and make. GI Nipple 1'' x 4'' |
| 22 | GI Nipple 1'' x 6'' |
| 23 | Union 1'' |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 25 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. 12.47.1 Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 26 | Providing and fixing of 19mm ply of approved make including fittings, fixtures etc. complete. |
| 27 | Providing and fixing of 1.0mm thick mica including fittings, fixtures etc complete |
| 28 | Providing and fixing of wooden flooring of approved quality and make including necessary fittings and fixtures etc. complete. |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing 6mm thick ply of approved quality and make including necessary fittings, fixtures etc. complete (Green/Century/Archid) |
| 31 | Providing and fixing of flush door shutters of approved make fixed with 1mm thick mica on both side complete |
| 32 | Providing and fixing of Handle 5'' long |
| 33 | Providing and fixing of kitchen chimney having suction 1350 cmh , filterless auto clean,motion sensor incl. cuttinh hole in wall for outlet and making good the surface with painting complete make-faber,elica,hindware,glen |
| 34 | Providing and fixing of gas stove electrically/battery operated Easy to clean, toughened black glass top extra strong pan support stainless steel drip tray revolving inlet nozzle Fuel efficient brass burner extra strong pan support stainless steel drip tray Cooktop with 4 burner including making hole in shelf and wall for making provision of fixing of gas cylinder outside kitchen incl. cost of pipe and other required fittings complete job make-faber,elica,hindware,glen, |
| 35 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm |
| 36 | Labour engaged for cleaning of roof top and removal of unwanted vegetation around the building. |
| 37 | Providing and fixing of PVC panelling including all necessary fittings, fixtures etc. complete. |
| 38 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 39 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded |
| 40 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 19.3.2.1 15mm nominal outer dia pipes. |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 19.4.1 Internal work-Exposed on wall 19.4.1.1 15 mm dia. nominal bore (Medium) |
| 44 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.7.4 In cement mortar |
| 45 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1 : 4 ( 1 cement : 4 fine sand) |
| 46 | Labour engaged/material consumed for carrying out miscellaneous works. 2 carpenter for 7 days |
| 47 | 1 helper for 7 days |
| 48 | 1 mason for 7 days |
| 49 | 2 labour for 7 days |
| 50 | Cement bag |
| 51 | Sand/Stone aggregate |
| 52 | Providing and fixing of channel 20'' long |
| 53 | Providing and fixing of hydraulic hinges |
| 54 | Providing of Nails/Screws |
| 55 | Providing and fixing of angle valve 15mm of Jaquar or equivalent of approved make including necessary fittings, fixtures etc. complete. |
| 56 | Providing and fixing of following sanitary items including necessary fittings, fixtures etc. complete. Basin mixer (Jaquar or equivalent make) |
| 57 | Bend mixer (Jaquar or equivalent make) |
| 58 | Short body bib cock (Jaquar or equivalent make) |
| 59 | Long nose bib cock (Jaquar or equivalent make) |
| 60 | Tumbler Holder (Jaquar or equivalent make) |
| 61 | Paper Holder (Jaquar or equivalent make) |
| 62 | Hand shower (Jaquar or equivalent make) |
| 63 | P/F of wash basin with pedestal of standard quality and make in including all necessary fixtures and fittings complete job |
| 64 | Over head shower (Jaquar or equivalent make) |
| 65 | Shower arm (Jaquar or equivalent make) |
| 66 | Providing and fixing sink mixer Jaguar or equivalent Dual flow |
| 67 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS. 13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm |
| 68 | Soap case (Jaquar or equivalent make) |
| 69 | Providing and fixing of Looking glass including necessary fittings, fixtures etc. complete |
| 70 | Providing and fixing of Glass shelf of 8 to 10mm thick clear glass including grinding of corner and edges completewith necessary fittings, fixtures etc. complete. |
| 71 | Disposal of dumped mulba beyond municipal limit by way of engaging trolley including loading and unloading complete. |
| 72 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.58.1 75 mm diametre |
| 73 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.58.2 110 mm diametre |
| 74 | Providing and fixing 0.8mm thick mica including necessary fittings, fixtures incl. adhesive etc. complete. |
| 75 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.6.1 All kinds of soil : |
| 76 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 77 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:11⁄2:3 (1 cement : 11⁄2 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 78 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.5.2.2 1:11⁄2:3 (1 cement : 11⁄2 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 79 | Centering and shuttering including strutting, propping etc. and removal of form for:5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 80 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 13.7.2 1 : 4 ( 1 cement : 4 fine sand) |
| 81 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 82 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 83 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :6.1.4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 84 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in :6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 85 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 86 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender