Tender For Special Repair To Bldg No Tr-04 And T-67 And Provision Of Geysers At Sunderbani Under Ge(N) Akhnoor.
Tender Value
31.28 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
4 days left
EMD
62500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Tr-04 And T-67 And Provision Of Geysers At Sunderbani Under Ge(N) Akhnoor.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Sep-2026 | BOQ Corrigendum | BOQ | 17-Sep-2026 |
| 2 | 07-Sep-2026 | Tender Corrigendum | Other | 17-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain corrugated steel sheets of any gauge and thickness as in roof coverings including ridge complete all as specified and as directed. |
| 2 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed. |
| 3 | Pre-painted galvalume aluminum zinc coating GI based plain steel sheet .50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws as specified |
| 4 | Dismantling timber scantlings framed work 40 sq. cm and over in section, in any position all as specified and as directed. |
| 5 | Dismantling timber scantlings framed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as specified and as directed. |
| 6 | Dismantling of mild steel work of any description all as specified and as directed. |
| 7 | Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality A complete all as specified. |
| 8 | Ditto All as per Ser item No. 7, above but fabrication and refixing only complete all as specified and as directed. |
| 9 | Dismantling of wall and ceiling boards including ceiling framework such as fillets, rails, posts, rafters, purlins,channel,runner etc. ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness, all as specified and as directed. |
| 10 | Providing and fixing in position 10mm thick Plaster of Paris False ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or GI metal frame work and reinforced with G.I. wire mesh for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs or roof truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. The job shall include making step ceiling vertical surfaces, cove for lighting, groove and edge moulding, any sunk or raised moulding etc all as specified and as directed. Note :- Pattern of Ceiling will be decide and approved by GE & as per specifiecation. |
| 11 | Providing & fixing of 4mm thick designer ceiling board Make : Everest in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction complete all as specified & directed. |
| 12 | Demolition of brick work or Stone masonary built in cement mortar including all quions, arches , pillars etc. all as specified and as directed. |
| 13 | Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4. complete all as specified and as directed. |
| 14 | Ditto All as per item No. 13, above but except stone set in CM 1:4 complete all as specified and as directed. |
| 15 | Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 all as specified and as directed. |
| 16 | Taking down cement plaster from brick or stone walls and ceilings incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 17 | Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. WPC shall be measured and paid seperately. |
| 18 | Rendering 10 mm thick cement plaster with cement mortar(1:6) on stone masonary surfaces or surface other than fair face of brick-work or on one side of lathing and finished even and smooth without using extra cement complete all as specified. |
| 19 | GI wire netting in repairs 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required complete all as specified and directed. |
| 20 | Applying 3mm thick wall care putty in two layers on new plastered and unplastered surfaces of walls all as specified and directed. |
| 21 | Supply Liquid water proofing compound all as specified and as directed. |
| 22 | Complete removal of exising treatment of old surfaces of walls complete all as specified and directed. |
| 23 | Preparation of new plastered surfaces of walls and applying two coats of interior plastic Emulsion paint 1st quality incl priming of surface with alkali resistant priming paint all as specified and as directed. (Colour of interior Emulsion will be selected from approved make shade card and decided. |
| 24 | Preparation of Old plastered and unplastered surfaces of walls,washing, rubbing, stopping,brooming down old distempered/painted surface with steel wire brushes and applying two coats of interior plastic Emulsion paint 1st quality incl priming of surface with alkali resistant priming paint all as specified and directed. (Colour of interior Emulsion will be selected from approved make shade card and decided. |
| 25 | Preparation of new plastered and unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV Resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new plastered surfaces all as speicfied and directed. |
| 26 | Preparation of old plastered and unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV Resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over old prepared surfaces all as speicfied and directed. |
| 27 | Repairs to balcony/Facia and soffit of chajjas/Roof projections etc by taking down old rendering 15 to 20 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sq cm in width or girth incl GI wire netting in repairs 0.90mm dia and 12mm mesh in soffits of roof projections, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each incl preparation of surface and applying two coats of premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV Resistance as per IS 15489:2004 over one coat of primer including shuttering/scaffolding work upto height of 7.0m complete all as specified. |
| 28 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demoltion complete all as specified. |
| 29 | Reinforcement cement concrete (nominal mix) type B1 1:2:4 (20mm graded stone aggregatge) for Chajjas/Balcony/Landing work/kitchen Slab if any all as per specified. |
| 30 | Formwork to sides and soffits of floor or roof beams, Plinth and Lintel beam, haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified. |
| 31 | Mild steel bars 10mm dia TMT Bars and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete fixed in repairs all as specified and directed. |
| 32 | Dismantling floor health or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 33 | Plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub base of floors all as specified and directed. |
| 34 | Vitrified Ceramic tiles dark shade double charged/Ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (900mm x 900mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed/base in cement and sand mortar 1:4 all as per directed. |
| 35 | Vitrified Ceramic tiles dark shade double charged/Ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (900mm x 900mm), as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4 finished even and fair to recieve tiles, all as specified and as directed. |
| 36 | Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed (Make and shade of tiles will be decided. |
| 37 | Glazed ceramic tile 450x300x7mm/ 600x1200mm thick (coloured) on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering (Broomed) in cement and sand mortar 1:4, complete all as specified and directed. |
| 38 | Granite (of any type) work 20mm thick (table rubbed and polished) in steps of staircase, door and window cills, jambs,pilllars and kitchen platform (Single Piece of slab for cooking Plateform) incl Dado/skirting and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of Granite including 15mm thick screed bed/base in CM 1:4, all as specified and as approved. Note-: A hole will be made in slab for Gas pipe. |
| 39 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed. |
| 40 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) nexc 1.50 sqm complete all as specified and directed. |
| 41 | Solid PVC Door and Cupborad frame of size 50 mm x 47 mm (Wooden Texture) made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing & all as specified and directed. |
| 42 | Factory made solid Panel PVC door and Almirah shutter 30mm thick (Wooden Texture) (style) consisting of frames made out of MS tubes for top and bottom rails M.S frames shall be covered with heat channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rails, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/slealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawing & all as specified and directed. |
| 43 | Powder coated Anodised aluminium window (including glazed and skelton shutter ) and ventilator shutters, side hung type without sash bars, including anodised aluminium frame made of size 100mm x 45mm of section thickness 1.50mm thick with one or more rebates, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, 150mm long (2 nos) hinges type B-21, 200mm long (2 nos) suitable bow handles, 150mm long (2 nos) tower bolt (thickness of powder coating should not less than 50 micron) including 5.5 mm thick tinted/black glass sheet of selected quality and glazing with aluminium beads and EPDM rubber packing in glazed shutter and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in skelton shutter in square complete all as specified and as directed by Engineer-in-Charge. Note :- All fitting shall be of ISI marked, sizes of each shutter shall be as per site requirement all as specified and directed.(Only width and height of window will be measured at site irrespective of no. of shutters for payment purpose). |
| 44 | Powder coated Anodised aluminium door air tight of anodised frame made of size 100mm x 45mm of section thickness 1.50mm thick with one or more rebates including jointing cleats etc for fixing aluminium anodised door shutter fully panelled (two Nos of panels on each shutter) with 5.5mm thick tinted/black glass sheet in shutter rail made of 80mmx45mm of sheet thickness 1.50mm thick (Top, bottom, middle and side rails) / 5mm thick ACP panel of required size single/double leaf side hinge type including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, necessary jointing /aluminium fillets/glazing bars with rubber gasket with aluminium fillets such as on bottom rail, door hydraulically regulated door closer-01 Nos, aluminium tower bolt 150mm long 02 Nos , aluminium anodised bow handles (fancy type) 200mm long 02 Nos on each shutter mortice locks 6 lever Make-harrison, one on each door, bottom and floor stoppers, door seal on bottom rail, all fitting shall be of ISI marked except cleats) sizes of each door shall be as per site requirement complete all as specified and directed. |
| 45 | Three track Powder coated Anodised aluminium windows of standard tubular sections of approved make having two glazed panels and one skelton panel of appropriate size running on three seperate tracks in the channel conforming to IS: 733 and IS: 1285, including anodised frame made of section size 100mmx45mm of section thickness 1.50mm thick, fixing with dash fasteners of required dia and size and in square including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections weighing 0.55 kg/m incl necessary joining cleats, 150mm long (2 nos) hinges type B-21, 200mm long (2 nos) suitable handles, 150mm long (1 nos) tower bolt (thickness of powder coating should not less than 50 micron). Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats, etc. complete and powder coating in approved shade and colour including 5.5 mm thick tinted/black glass sheet of selected quality and glazing with aluminium beads and rubber packing in glazed shutter and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. Note :- All fitting shall be of ISI marked) sizes of each shutter shall be as per site requirement all as specified and directed.(Only width and height of window will be measured at site irrespective of no. of shutters for payment purpose). |
| 46 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, l complete all as specified and directed |
| 47 | 100 mm butt hinges, medium weight cold rolled mild steel complete all as specified. |
| 48 | Extruded Aluminium alloy handles, fabricated type anodised of size 150mm long ISI marked complete all as specified and as directed. |
| 49 | Aluminium anodised barrel tower bolt of extruded section 150 mm long ISI Marked complete all as specified and as directed. |
| 50 | Curtain rail ,20 mm dia mild steel ,chromium plated fixed with brakets,stops,rollers etc in repairs complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 51 | Curtain rail ,20 mm dia mild steel ,chromium plated fixed with brakets,stops,rollers etc in repairs complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Sep 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender