Tender For Maintenance Of Iei & Eei To Non- Residential Buildings Of Transport Department Under Section-Ii Of Sub-Division-Ii, Workshop Division, Apwd During 2024-2025. Sw:Providing Iei To Toilet Blocks Of Bus Terminus Under Transport Department, Moh
Tender Value
3.53 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
6 days left
EMD
3532
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Iei & Eei To Non- Residential Buildings Of Transport Department Under Section-Ii Of Sub-Division-Ii, Workshop Division, Apwd During 2024-2025. Sw:Providing Iei To Toilet Blocks Of Bus Terminus Under Transport Department, Mohanpura Under Section-Ii Of Sub-Division-Ii, Workshop Division, Apwd, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | a) Group C |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 4 | a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth |
| 5 | b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 6 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 7 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 8 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 9 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 10 | Supplying of 9W LED lamp, B22, CDL/WW 2S lamp V8i Make: Havells Model :-LED PLUS 9W B22 or equivalent in Bajaj/Crompton/Philips in the lamp holder etc as required. |
| 11 | Supplying of LED batten CRCA housing box type luminaire suitable for 1 x 18/20W T8 LED retrofit tube lamp Make:-Bajaj Cat.No. BLRB-DB-118 or equivalent in Havells /Crompton /Philips complete with all accessories etc as required. |
| 12 | Supplying of 20W LED Tube integrates LED light source with frosted cover design Make:- Philips Cat.No. Essential LED Tube 20W B2B 865 T8 or equivalent in Havells/ Bajaj/ Crompton |
| 13 | Supplying of 1 feet 5 W LED batten ( integrated ) ,WW/CDL/NW, Make: PHILIPS Model:- Astra Line 5W or equivalent in Crompton/Havells/Bajaj complete with all accessories etc as required. |
| 14 | Installation ,Testing, Commissioning of wall bracket /ceilingfittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 15 | Supplying of 250mm sweep Exhaust fan ( Non- Metallic Range) Make: USHA- CRISP AIR EXH FAN or equivalent in Bajaj/Havells/Crompton/RR Fans/Orient complete with all accessories etc as required. |
| 16 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 17 | a) Upto 450 mm sweep |
| 18 | Supplying of 100W LED flood light fittings Make:- Bajaj Model BAJAJ PRAZE Cat.No. PRAZE 140L WH NB-A5 TG SD or equivalent in Havells/Philips/Crompton complete with all accessories etc as required. |
| 19 | Supplying of 70W LED street light fittings Make:- Bajaj Model:-EDGE NXT LED Cat.No. ENXT P84L WH CR PC SD, 70W, 5700K or equivalent in Havells/Philips/Crompton complete with all accessories etc as required. |
| 20 | Supplying and fixing of Street Light Support Rod with Adjustable Clamp, Metal Support Pipe for Outdoor Lighting Make:- ZOREZA, Material:- Metal , Colour:- Grey on building wall for mounting LED street light fittings with suitable size for 1.5 sqmm PVC insulated copper conductor cable in medium class PVC conduit or equivalent in any reputed make as per the direction of Engineer-in-charge. |
| 21 | Installation, testing and commissioning of LED street light fittings and LED Flood light fittings including connection etc as required. |
| 22 | Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required.Make; Havells or equivalent in Polycab/Finolex/RR cables /Anchor |
| 23 | a) 3.5 Core x 25 Sqmm |
| 24 | Supplying and laying of following sizeDWC HDPE PIPE along with all accessories like socket, couplers etc confirming to IS: 14930 PART- II Complete with necessary HDPE fittigs for protection of 1.1 KV grade on surface etc as required. |
| 25 | a) 40 mm dia (OD-40 mm & ID-32 mm nominal) |
| 26 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 27 | a) 40 mm dia (OD-40 mm & ID-32 mm nominal) |
| 28 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 29 | a) 50 mm dia |
| 30 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 31 | a) Upto 35 sq. mm |
| 32 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 33 | a) Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 34 | Supplying of PVC insulated and PVC sheathed aluminium conductor Un-armoured XLPE power cable of 1.1KV grade of following sizes etc as required.Make; Havells or equivalent in Polycab/ Finolex/ RR cables /Anchor |
| 35 | a) 4 Core x 6 Sqmm |
| 36 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 37 | a) 4 way (4 + 12), Double door |
| 38 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 39 | a) 63 A |
| 40 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 41 | a) Single pole |
| 42 | b) Triple pole and neutral Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender