Tender For Repair And Maintenance Of Misc Items And Improvement Of Installations Of Cvrde Avadi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
14 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Misc Items And Improvement Of Installations Of Cvrde Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete Nominal concrete 1:4:8 or leaner mix ( i/c equivalent design mix )manually / by mechanical means including disposal of materials within 50 metres as per direction of Engr -in- Charge |
| 2 | Material and Labour for laying PCC with 1:2:4 (1 Cement: 2 Coarse sand (Zone-III) derived from natural sources: 4 Graded stone aggregate 20 mm nominal size derived from natural resources) of 25mm thick using 20mm graded aggregate laid as levelling course complete all as specified and directed. |
| 3 | Material and Labour for Providing Epoxy injection grout in concrete / RCC work of approved make proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge.(Note : The payment shall be made on the basis of actual weight of approved grout injected.) |
| 4 | Material and Labour for 75 mm average thick chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as specified and directed. |
| 5 | Material and Labour for Cleaning of reinforcement (bars above 12 mm diameter) from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed. |
| 6 | Material and Labour for Providing, mixing and applying bonding coat of approved adhesive (Epoxy bonding adhesive having coverage 2.20 sqm/kg) on chipped portion of RCC complete all as specified and directed by Engineer- In-charge. |
| 7 | Material and Labour for providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants complete all as specified and directed. |
| 8 | Material and Labour for Providing 50 mm average thickness in 3 layers) mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) complete all as specified and directed by Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)complete all as specified and directed. |
| 9 | Dismantling old plaster,skirting raking,and dado of wall tiles out joints and cleaning the surface for plaster from brick walls or concrete surfaces including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engg-in-Charge. |
| 10 | Material and Labour for Rendering 6 mm thick cement plaster on ceiling surfaces in cement mortar 1:3(1 cement: 3 Coarse Sand) finished fair and even with a floating coat of neat cement of mix complete all as specified and directed. |
| 11 | Material and Labour for Rendering 15mm thick in fair faces of brick work or concrete surfaces in CM 1:4(1 cement: 4 Coarse Sand) finished even and smooth in fine sand complete all as specified and directed by Engg-in-Charge. |
| 12 | Material and Labour for Preparation of new plastered ceiling surfaces and apply three coats of white wash etc complete all as specified and directed by Engg-in-Charge. |
| 13 | Material and Labour for Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and White washing (one or more Coats) with lime to give an even shade complete all as specified and directed. |
| 14 | Material and Labour for Finishing wall New work ( Two or more coats applied @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives complete all as specified and directed. |
| 15 | Material and Labour for Finishing old wall surfaces ( Two or more coats applied @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives including Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete all as specified and directed. |
| 16 | Demolishing brick work (In cement mortar) manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engineer-in-charge. |
| 17 | Material and Labour for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and Labour for Rendering 12 mm thick in fair faces of brick work or concrete surfaces in CM 1:6(1 cement : 6 coarse sand) finished even and smooth in fine sand complete all as specified and directed by Engg-in-Charge. |
| 19 | Material and Labour for Distempering with 1st quality acrylic distemper (readily mixed) with two or more coats on new wall work having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over including 2mm thick internal wall care putty finish complete all as specified and directed by Engg-in-Charge. |
| 20 | Material and Labour for Distempering with 1st quality acrylic distemper (ready mixed) on Old Surfaces having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour with two or more coats on new work over including 2mm thick internal wall care putty finish including Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed. |
| 21 | Material and Labour for prepartaion of old steel surfaces of any description over 10cm in width or grith ot otherwise described and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed. |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels of Granite stone slab colour black, Cherry/Ruby red area of slab over 0.50 sqm complete all as specified and directed. |
| 23 | Material and Labour for mixing and applying SBR polymer of approved make modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) of 25mm average thickness in two layers complete all as specified and directed by Engg-in-charge. (Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 24 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns) complete all as specified and directed by Engg-in-Charge. (Note :The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes) |
| 25 | Supply only integral water proofing compound |
| 26 | Material and Labour for laying PCC with 1:4:8 (1 Cement: 4 Coarse sand (Zone-III) derived from natural sources: 8 Graded stone aggregate 40 mm nominal size derived from natural resources) complete all as specified and directed. |
| 27 | Material and Labour for laying of Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles Dark shade pigment using ordinary cement, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), complete all as specified and directed by Engg-in-Charge. |
| 28 | Material and Labour for laying Machine pressed coloured precast with grey cement and pigment conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over a layer of 25mm thick sand cushion complete all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender