Tender For Special Repair To Building No.P-116 (Offr Accn) Of 105 Ad Regt At Sector ‘C Makarpura Baroda Under Ge (A) Baroda.
Tender Value
38.64 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
12 days left
EMD
77280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No.P-116 (Offr Accn) Of 105 Ad Regt At Sector ‘C Makarpura Baroda Under Ge (A) Baroda.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors & wall,laid bedded & pointed in any mortar. |
| 2 | M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 including necessary adhesive (tile pattern and decoration may be as suggested by Enginner-in-charge. |
| 3 | M&L for colour Virified Ceramic tiles 9 to 10 mm thick of shade Aprroved by GE (Square/rectangular) polished area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 complete all as specified and directed.. |
| 4 | M&L for Virified Ceramic tiles 9 to 10 mm thick of shade approve by GE (square/ rectangular) polished, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:6 complete all as specified and directed. |
| 5 | M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including 10 mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles including necessary adhesive (Tile pattern and decoration as approved by Engineer-in-charge) complete all as specified and directed. |
| 6 | M&L for 12 to 15 mm thick machine cut green marble stone in single piece in window/opening (jambs/cills) laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigments to match the shade of slab inclunding rubbing and polishing complete inclunding 10 mm thick plastering with cement mortar 1:3 including necessary adhesive complete all as specified and directed. |
| 7 | M&L for machine cut kota stone slab flooring in landings of staircase & treads of steps etc. of 18-20mm thick in one piece and marking two line grooves as directed incl rubbing mirror polishing and set over and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6. complete all as specified and directed. |
| 8 | M&L Kota stone slab 12 to 15mm thick in riser of steps, skirting, dado and pillar etc. including rubbing and mirror polishing complete set over and including rendering cement mortar 10 mm thick for laying on wall in CM 1:3 complete all as specified and directed. |
| 9 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each complete all as specified and directed. |
| 10 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each complete all as specified and directed. |
| 11 | M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. complete all as specified and directed. |
| 12 | S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 13 | M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).property of being ermite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/SS dash fasteners of required dia and length all as complete all as specified and directed. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)SS screws complete all as specified and directed. |
| 16 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 17 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of sliding windows & side hang ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws and lock and roller etc all small fitting all complete as per architectural drawings and the directions of Engineer-in-charge.Note: For payment only aluminium section will be measured. |
| 18 | S&F 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 19 | S&F magnetic catch size (70x20x15)mm including fixed with screw complete all as specified |
| 20 | S&F 4.00mm+/-0.20 thick tinted glass of bronze colour selected quality glazing with rubber clips exc 0.5sqm in each panel, commplete all as specified and directed. |
| 21 | S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips n exc 0.5, all as specified and directed. |
| 22 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 23 | M & L Cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in coping, bed plate for hold fast etc. complete all as specified and directed. |
| 24 | M&L for 100mm butt hinges of mild steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 25 | M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 26 | S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 27 | S & F 150 mm size extruded aluminium alloy handles, febricated type anodised complete all as specified and directed. |
| 28 | S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters complete all as specified and directed. |
| 29 | S & F in repairs tubular curtain rails 25mm dia and 1mm thick stainless steel 304 grade drapery type complete all as specified directed |
| 30 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 31 | S&F in repairs, towel rail 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. (Make: Jaquar or equivalent) |
| 32 | S & F in repair soap dish disc (oval) type, stainless steel chromium plated of approx size 100x50x10mm complete all as specified and directed. |
| 33 | M & L mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework (caging) of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 34 | M & L for preparing new steel surface of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 35 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 36 | S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 37 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 38 | S & F 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 39 | Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 40 | Dismantling of 75mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 41 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed. |
| 42 | S & F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 43 | S & F in 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 44 | S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 45 | S & F 75mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and as directed. |
| 46 | S & F 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent complete all as specified and as directed. |
| 47 | S & F in 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door complete all as specified and as directed |
| 48 | S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door complete all as specified and as directed |
| 49 | S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe complete all as specified and as directed |
| 50 | S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe complete all as specified and as directed |
| 51 | S & F 110mm PVC (SWR) vent cowl complete all as specified and as directed |
| 52 | S & F 75mm PVC (SWR) vent cowl complete all as specified and as directed |
| 53 | S & F 110mm PVC (SWR) junction single, (Single T type) equal or unequal complete all as specified and as directed. |
| 54 | S & F 75mm PVC (SWR) junction single, (Single type T) equal or unequal complete all as specified and as directed. |
| 55 | S& F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 56 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracket and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 57 | S&F in repair Bib tap brass chromium plated long nose of 15mm bore including CP socket and nipple complete all as specified and directed. |
| 58 | S&F 15mm bore central hole wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed ( Make: Jaquar(cat part No SOL-6359or equivelent in ESS, Prayag (Cat Part -7814N) complete all as specified and directed |
| 59 | S&F in repair Stop/angle cock CP brass 15mm bore including CP socket & nipple complete all as specified and directed. |
| 60 | S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | S & F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to steel pipe or GI union complete all as specified and directed. |
| 62 | S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe complete all as specified and directed. |
| 63 | S&F 40 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe complete all as specified and directed. |
| 64 | Dismantling of water storage tank exc 500ltrs but n,exc 1000 litrs capacity complete all as specified and directed. |
| 65 | Dismantling of water storage tank exc 1000ltrs but n,exc 2000 litrs capacity complete all as specified and directed. |
| 66 | S&F 500 ltrs rotational moulded polythene White colour water storage water tanks four layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including tank adopter all as specified in SSR Part I duly ISI Marked, complete all as specified and directed. |
| 67 | S&F 1000 ltrs rotational moulded polythene White colour water storage water tanks four layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including tank adopter all as specified in SSR Part I duly ISI Marked, complete all as specified and directed. |
| 68 | S&F 25mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all specified and directed. |
| 69 | S&F in repair Vitreous china premium/ 1st quality wash down water closet Wash down water closet wall hung type EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified etc. complete including making good to floor. complete all as specified and as directed. |
| 70 | S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type \\"Orrisa\\" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC complete all specified and directed. |
| 71 | S&F in repair PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band (flush pipe) 32mm complete all as specified. |
| 72 | S&F in repairs Plastic water closet seat,matched with seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 73 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 74 | S&F in repair vitreous china Wash hand basin, white , size 550x400 mm oval type below counter basin except taps, CP waste coupling 32mm dia but incl brackets complete all as specified and directed. Make cera/Hindware |
| 75 | S&F in repair vitreous china WHB white size 450x300mm including Supplied and fixed angle iron brackets, CP waste coupling, 32mm dia complete all as specified & directed. |
| 76 | S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. Make : Prayag or equivalant. |
| 77 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 78 | S&F 600mm long glass shelf with chromium plated guard complete all as specified and directed. |
| 79 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed. |
| 80 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 81 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC. |
| 82 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished fair complete all as specified and directed. |
| 83 | M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately). complete as specified and directed. |
| 84 | M&L Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) complete all as specified and directed. |
| 85 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer complete all as specified and as directed. |
| 86 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and a coat of alkali resitant primer complete all as specified and as directed. |
| 87 | M& L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 88 | M & L for Complete removal of exiting treatment from wall and preparation of old surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer complete all as specified and as directed. |
| 89 | M& L for Complete removal of exiting treatment from wall and preparation of old surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. |
| 90 | M & L for complete removal of all existing treatment and providing two coats of OBD over and including a coat of 2mm average thickness birla/ equivalent wall care putty and a coat of alkali resitant primer as in ceiling completd all as specified and directed. |
| 91 | M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge . (Reiforcement will be measured and paid saperately under respective item. |
| 92 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and as directed. |
| 93 | M & L for complete removal of existing water proofing treatment including PCC tiles, plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge |
| 94 | M&L for 40 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone in roof complete all as specified and directed. |
| 95 | M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof complete all as specified and directed(WPC will be measured and paid separately). |
| 96 | M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge (Note: the primer and the membrane to be used shall be of the same manufacturer and to be applied by authorized applicator of OEM). |
| 97 | Supply only Internal water proofing compound (Liquid type) all as specified and directed (Dr Fixit Pidiffin/Sika or equivalent) complete all as specified and directed. |
| 98 | Demolition of existing PCC/lean concrete including floor tiles and removing rubbish off the premises commplete all as specified and directed. |
| 99 | M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with liquid water proofing compound as per manufacturers instruction and should be even and smooth without using extra cement complete all specified and directed. Note . (WPC will be measured and paid separately). |
| 100 | M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed. |
| 101 | M&L for providing & laying applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed as per manufacturer instructions complete all as specified and as directed. |
| 102 | S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed. Make : Cera/Prayag/Jaquar or equivelent make. |
| 103 | S&F in repairs 350x450mm size cabinet mirror rectangular shape with 4mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as complete all as specified and directed.Make : Prayag & equivalent. |
| 104 | S&F in repairs Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed. |
| 105 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 106 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge and complete all as specified and directed, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 107 | Dismantling cast iron work of any de scription complete all as specified and direted by Engr-in-charge. |
| 108 | S&F of Steel rolling shutters 1mm thickness of leth, with ball bearing, as specified including hood cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete but gear operated type with bevel gear box and crank handle complete as specified in SSR Part I (2009) all as specified and directed. |
| 109 | S&F in Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and direted by Engr-in-charge. |
| 110 | Excavation in trenches in soft and loose soil n.exc 1.5 mtr wide and n.exc. 1.5 mtr depth for laying and taking out of electric power cable and getting out in soft/loose soil all as specified and directed by engineer –in-charge. Note: (i) Digging shall be carried out by manual means only.(ii) During the excavation damage of Road, Electric cable, Signal Cable should be rectified by the contractor without any extra cost. |
| 111 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as specified and directed. |
| 112 | Removing excavated material not exceeding 50 mtr away and depositing where directed at a level n. exc 1.5 mtr above the starting point . |
| 113 | Taking up GI pipe steel tubing from trench/walls etc including all fittings for following bore of pipe: |
| 114 | 40 mm bore |
| 115 | 25 mm bore |
| 116 | 15 mm bore |
| 117 | S & F to wall/trenches GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc for following bore of pipe complete all as specified : |
| 118 | 40 mm bore |
| 119 | 25 mm bore |
| 120 | 15 mm bore |
| 121 | S & F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for 25mm bore of pipe |
| 122 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. |
| 123 | Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity. |
| 124 | M&L for taking down carefully sub main wiring including batten any type of conduit by unscrewing from floor,wall,ceiling and making good surfaces to match with original status for all types of sub main wiring. |
| 125 | M & L for concealed point wiring complete with multistranded copper conductor (FRLS)1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in including PVC conduit not less than 20 mm dia concealed duly fixed with U-Clips, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed Modular Metal flush box of required size not less than 2 mm thick GI Plate factory made with modular cover plate, screw with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable (FRLS) as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. |
| 126 | For one light, fan point controlled by one switch. |
| 127 | For call bell point controlled by one switch. |
| 128 | For one 5 Amp independent socket point controlled by one switch. |
| 129 | For one 3 pin ,5 Amp socket point with other switch on the same board. |
| 130 | For one light, point controlled by two way switch. |
| 131 | All as per item No 119 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by engir in charge. |
| 132 | All as per item No 4 here in before but for power point wiring using with 4 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 4 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by engir in charge. |
| 133 | S&F Modular switch 1 way 6A, 1module. |
| 134 | S&F Modular switch 2 way 6A, 1module. |
| 135 | S&F Modular call bell switch 1 way 6A, 1module. |
| 136 | S&F Modular Socket, 6A - 2/3 pin combined 2module. |
| 137 | S&F Modular switch 1 way 16A, 1module. |
| 138 | S&F Modular Socket, 16A - 3/5 pin combined 2module. |
| 139 | S&F Modular Fan step regulator, 120W - 2 module. |
| 140 | S & F ceiling rose surface polycarbonate body three terminal. |
| 141 | S & F Lamp holder, PVC type with back plate suitable for batten fittings including LED lamp 9 Watt complete all as specified and directed. |
| 142 | M&L concealed Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 20 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 143 | S & F of ceiling fan operated with blades, anti suicide rod from existing roof / trus to fall ceiling, electronic regulator operated and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed.Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. |
| 144 | S & F of LED light fitting 20 Watts (4 Feet), 220 Volts AC, Aluminium extrusion , input 140-270 Volts AC, CCT 6000K, luminus efficiancy 100 lumens/watt, surge protection upto 4KV volage protection upto 440V, AC, PF >0.9 and including LED light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 145 | S & F of LED light fitting 10 Watts (2 Feet), 220 Volts AC Aluminium extrusion , input 140-270 Volts AC, CCT 6000K, luminus efficiancy 100 lumens/watt, surge protection upto 4KV volage protection upto 440V, AC, PF >0.9 and including LED light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 146 | S&F sheet metal enclosure VTPN DB's double door 4 Ways, IP-43 240 V with 200 Amps rated bus bar. Note :- Cutting and chasing in stone/Brick masonary and making good to disturbed surfaces will be including in item rate . |
| 147 | S&F sheet metal enclosure for DB double door SPN 12 Ways, IP-43 240 V with 200 Amps rated bus bar including taking down.Note :- Cutting and chasing in stone/Brick masonary and making good to disturbed surfaces will be including in item rate . |
| 148 | S&F testing and commissioning of MCCB 4 pole 240 volt 100 Amp 16 KA thermal magnatic connected with suitable lugs including taking down. |
| 149 | S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs. |
| 150 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. All as specified and directed by Engr in charge. |
| 151 | S & F in replacement Bell ding dong type, one way, 240 volts, AC, ISI marked. |
| 152 | S & F LED light fitting 1X10 Watt bulkhead input 140-270 Volts AC, CCT 6000K, luminus efficiancy 100 lumens/watt, surge protection upto 4KV volage protection upto 440V, AC, PF >0.9 and including LED light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 153 | S & F of LED bldg security light fitting 35 Watt input voltage 140-270V AC outdoor type with high robust die cast body aluminium housing CCT 6500K lumeinous efficincy > 120 lumens/watts CRI > 70, PF >0.95 protection class IEC safety class-I and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete including old U/S taking down complete all as specified and directed. Mak : Havells/Philips/Bajaj .Note :- The warranty on light should be of minnimum 3 Years . |
| 154 | S & F of exhaust fan made of sturdy engineering Steel body complete with louvers shutter & mosquito net, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300 mm including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including make hole in stone/brick wall grouting & making good in all aspects and taking down existing UNSV exhaust fan complete all as specified and directed.Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. |
| 155 | S & F of exhaust fan made of sturdy engineering plastic body complete with louvers shutter & mosquito net, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250 mm including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including make hole in stone/brick wall grouting & making good in all aspects and taking down existing UNSV exhaust fan complete all as specified and directed.Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. |
| 156 | Taking down existing geyser of any capacity, kept in safe condition and refixing after repair, make serviceable with completion of new wiring at same location as per direction of Engr-in-Charge. |
| 157 | Taking down existing energy meter, kept in safe condition and refixing after completion of new wiring at same location with PVC Box as per direction of Engr-in-Charge. |
| 158 | M & L for fabrication of sheet metal board of size 70x60x20 CM made of 2mm thick MS Sheet with locking arrangement dully two coat of synthetic enamelled paint over one coat of red oxide. All as specified and directed by Engr in charge. Note :- Cutting and chasing in stone/Brick masonary and making good to disturbed surfaces will be including in item rate . |
| 159 | M&L for Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion and including old U/S taking down.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender