Tender For Construction of Rain Water Harvesting Structure At Chassi Khad In Gp Surla Tehsil Nahan Distt. Sirmour Hp (Sh:- Laying, Jointing And Testing Of Hdpe Pipes Of 110 Mm Dia In Distribution System) Job No. 2 Under Nabard. Estimated Cost:- 10,79
Tender Value
10.79 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
8 days left
EMD
21580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Rain Water Harvesting Structure At Chassi Khad In Gp Surla Tehsil Nahan Distt. Sirmour Hp (Sh:- Laying, Jointing And Testing Of Hdpe Pipes Of 110 Mm Dia In Distribution System) Job No. 2 Under Nabard. Estimated Cost:- 10,79,080 /-, E/Money:- 21,580 /-, Time:- 6 Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in drain and channels etc in earth work for pipes up to all classification of earthwork such as pick work,jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiselling soft/hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, levelling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable /unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 CM layers including consolidating of such deposited layer by ramming & water & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lift including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night singles, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of the Engineer in Charge. |
| 2 | Laying ,jointing in trenches High Density Polythene Pipes for use for buried watermain line and services and and for water supply /irrigation above ground, both inside and out side building duly ISI marked (IS:4984 -1995 ) as ammended up to date) in the following grade of materials, pressure rating and nominal dia. complete with fitting (Earth work to be measured and paid for separetely ) |
| 3 | HDPE Pipe 110 MM Dia. PE 63.PN - 2.50 |
| 4 | HDPE Pipe 110 MM Dia. PE 63.PN - 4 |
| 5 | HDPE Pipe 110 MM Dia. PE 63.PN - 6 |
| 6 | HDPE Pipe 110 MM Dia. PE 63.PN - 8 |
| 7 | Providing and Laying ,jointing High Density Polythene Tee's Approved ISI Marked of following dia including all leads,lifts and carriage of material at site and as directed byt the Engineer in Charge. |
| 8 | HDPE Pipe 110 MM Dia. PE 63.PN - 2.50 |
| 9 | HDPE Pipe 110 MM Dia. PE 63.PN - 4 |
| 10 | HDPE Pipe 110 MM Dia. PE 63.PN - 6 |
| 11 | HDPE Pipe 110 MM Dia. PE 63.PN - 8 |
| 12 | Providing and Laying ,jointing High Density Polythene Elbow's Approved ISI Marked of following dia including all leads,lifts and carriage of material at site and as directed byt the Engineer in Charge. |
| 13 | HDPE Pipe 110 MM Dia. PE 63.PN - 2.50 |
| 14 | HDPE Pipe 110 MM Dia. PE 63.PN - 4 |
| 15 | HDPE Pipe 110 MM Dia. PE 63.PN - 6 |
| 16 | HDPE Pipe 110 MM Dia. PE 63.PN - 8 |
| 17 | Providing and Laying ,jointing High Density Polythene Plug/ Cap's Approved ISI Marked of following dia including all leads,lifts and carriage of material at site and as directed byt the Engineer in Charge. |
| 18 | HDPE Pipe 110 MM Dia. PE 63.PN - 2.50 |
| 19 | HDPE Pipe 110 MM Dia. PE 63.PN - 4 |
| 20 | HDPE Pipe 110 MM Dia. PE 63.PN - 6 |
| 21 | HDPE Pipe 110 MM Dia. PE 63.PN - 8 |
| 22 | Providing and Laying ,jointing High Density Polythene Union Approved ISI Marked of following dia including all leads,lifts and carriage of material at site and as directed byt the Engineer in Charge. |
| 23 | HDPE Pipe 110 MM Dia. PE 63.PN - 2.50 |
| 24 | HDPE Pipe 110 MM Dia. PE 63.PN - 4 |
| 25 | HDPE Pipe 110 MM Dia. PE 63.PN - 6 |
| 26 | HDPE Pipe 110 MM Dia. PE 63.PN - 8 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender