Tender For Construction Of Adarsh Gram Sukh Aashrya Parisar Village Luthan, Tehsil Jwalamukhi, Distt. Kangra, H.P.(Sh: Providing C Us Lighting Therein,With 2 Years On Site Amc).
Tender Value
1.51 Crore
Estimated cost
Bid Submission
03 Sep 2026
1 days left
EMD
3.02 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Adarsh Gram Sukh Aashrya Parisar Village Luthan, Tehsil Jwalamukhi, Distt. Kangra, H.P.(Sh: Providing C Us Lighting Therein,With 2 Years On Site Amc).
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Erection, Installation and Commissioning of Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcol/ coke and salt as required |
| 2 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 3 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. |
| 4 | Armoured cable 6 sq. mm (Twin Core) |
| 5 | Armoured cable 10 sq. mm (Twin Core) |
| 6 | Armoured cable 16 sq. mm (Four Core) |
| 7 | Armoured cable 25 sq. mm (3.5 Core) |
| 8 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 9 | Armoured cable 6 sq. mm (Twin Core) |
| 10 | Armoured cable 10 sq. mm (Twin Core) |
| 11 | Armoured cable 16 sq. mm (Four Core) |
| 12 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. |
| 13 | 100mm dia |
| 14 | 150 mm dia |
| 15 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 16 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 17 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 18 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 19 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 20 | 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 21 | Providing and fixing of LED Bollard Light of following Wattage (IP65 or better) fixture made of Die cast Alum. landscape Luminaire for downward lighting,having efficacy > 100 Lm/watts with high power LED as light source as required complete in all respects as required.(With 3years onsite warranty) |
| 22 | LED Bollard Light 15 Watt (IP65 or better),H-750MM |
| 23 | LED Bollard Light 2X15 Watt (IP65 or better),H-750MM |
| 24 | Makes:-Philips,Wipro,Twinkle-Luxmax(Cat No. LUXMAX-TBLED-201-S,LUXMAX-TBLED-201-Y)Bajaj,K-Lite |
| 25 | Supplying & erection of Decorative Lighting Pole of length 4 mtr . The pole made out of Galvanised Mild Steel Tubes with casted embelishments on bottom & embelishment at middle , base plate 250x250x12mm .The poles to be primer coated and painted with polyurethane paint.The Poles are suitable for single/double/triple/four side post top/drop down luminaries.The pole has a sevic window at the bottom profile comprising 4-way 25 Amp connector terminal and a MCB etc. The pole to be mounted on a 1:3:6 cement concrete base (pedestal) of 450X450 mm and 300 mm L-Type foundation bolts 4x16 mm dia. with nuts, templates and all complete as per approved drawing. Foundation RCC 1:3:6 shall be of size 450x450mm and depth 900 mm c/c as per approved drawing.The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing, complete in all respects as required.Makes:Philips,Wipro,Twinkle-Luxmax(Cat No.-LUXMAX-SP-114-402-Z4)Bajaj,K-lite . |
| 26 | 4 Meter long having 114mmx4 mm dia at bottom and75mmx3mm dia at top. |
| 27 | Providing and fixing of LED 40 Watt Post top (IP65) fixture of following capacity are made of Die cast Alum. housing/ Spun Aluminium with casted crown on top & middle with two nos. die cast Al base & ms arms are provided to support the housing power LED's are mounted on metal clad PCB's and LED's & PCB assembly are mounted extruded aluminium heat sinks. A UV stabilized PC diffuser is provided as complete in all respects as required.(With 3years onsite warranty) |
| 28 | LED Post top Gate Light 40 watts |
| 29 | LED Post top 40 watts |
| 30 | Makes:-Philips,Wipro,Twinkle-Luxmax(Cat No. LUXMAX-PT-157-CR)Gate Light- LUXMAX-PT-151-S,Bajaj,K-Lite |
| 31 | Providing and fixing of LED 24 watt post top Panel with 45 watt mono crystaline PV solar module (IP65 or better) fixture built in solar Panel LED Light and 12.8 v, 12 AH LifePo4 battery with Passive Infrared Sensor 12meter working range, Detection : 102 degree horizontal 92degree vertical with Lumen output 120Lm/Watts. 10-12 working hours per night,charging time 3-5 hours with direct sun shine, 3 stage battery charge monitoring algoritham, power extraction and inbuilt battery management systems and BIS certified batteries also over charge protction,Deep discharge protection,batterry reverse polarity protection,load short, open circuit protection and surge protection for hybrid models as required complete in all respects. |
| 32 | LED 24 Watt Solar Post top Panel |
| 33 | Makes:-Philips,Wipro,Twinkle-Luxmax(Cat No. LUXMAX-SPT-24)( IP-65 or better),Bajaj,K-Lite |
| 34 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 35 | Steel Conduit 50mm dia |
| 36 | Makes: BEC,Sidhart |
| 37 | Supplying, Installation, Testing and Commissioning of cubical type, indoor type,double door,floor mounted, fixed type, free standing single front,dust proof & compartmentalized Distribution Board made out of M.S. CRC Sheet 16G & Base frame 40X40X5MM ,dulypainted with Siemens Grey Powder Coated Paint as per specification Approximate Size (H)700MM X (W)500MM X (D)200MM and Assembly Charges of 100A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cable and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.and the panel should be approved/tested from the CPRI lab and should be Comfirm IEC 61439(Part-1&2)(EVA or approved make). |
| 38 | MATERIAL: |
| 39 | MAIN INCOMER :-MCCB 100A 4P 25KA TMR With O/L & S/C Protection -1 No.Spreader Link MCCB 100A 4P-2 No.,Indication Lamps LED Type RY-2 No's,Indication Lamps LED Type B- 1 No.,Control SP MCB 6A 10KA -3No's. |
| 40 | Outgoing:-MCB 40 Amps 4P 10KA- 6 No's. |
| 41 | All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc; |
| 42 | The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc, |
| 43 | Supplying, Installation, Testing and Commissioning of cubical type, outdoor type,double door,floor mounted, fixed type, free standing single front,dust proof & compartmentalized Street Light Panel automatic made out of M.S. CRC Sheet 16G & Base frame 40X40X5MM ,dulypainted with Siemens Grey Powder Coated Paint as per specification Approximate Size (H)600MM X (W)4500MM X (D)250MM and Assembly Charges of Copper solid/ Copper flexible wire interconnection and control wiring and All Interconnections of fields side are supported by conical, DMC Strip 63 Amps of adequate size to support & sustain the weight of cable and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.and the panel should be approved/tested from the CPRI lab and should be Comfirm IEC 61439(Part-1&2)(EVA or approved make). |
| 44 | MATERIAL: |
| 45 | Main Incomer :-MCB 40A 4P 10KA-1 No.,40 Amp 4P contractor-1 No.,Indication Lamps LED Type RY-2 No's,Indication Lamps LED Type B- 1 No.,Control SP MCB 6A 10KA -4No's,,Auto/Manual Selector switch-1 No.,Digital Time Switch-1 No. |
| 46 | Outgoing:-MCB 40 Amps DP 10KA- 3 No's. |
| 47 | The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc, |
| 48 | Providing and fixing of LED Step Light 7 Watt (IP66) fixture for Wall Recessed application as required complete in all respects. Makes:-Philips,Wipro,Twinkle-Luxmax, Bajaj, K-Lite |
| 49 | LED Step Light 7 Watt |
| 50 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.Makes-ELCON Global,super cable tray Pvt. Ltd. |
| 51 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 52 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.Makes-ELCON Global,super cable tray Pvt. Ltd. |
| 53 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 54 | Providing Annual Maintenance Contract (Already 3 years on site warranty on LED items included for contractor) for next two years as required complete in all respects. |
| 55 | 4th year @ 5% of basic amount |
| 56 | 5th year @ 5% of basic amount Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender