Tender For Restoration Of Rain Damages To Lwss Aman Phase-Ii In Gp Baloh In Tehsil Bhoranj Distt. Hamirpur Hp (Sh:- Shifting And Relaying Of 80 Mm 100 Mm Dia Risingmain Gravity Main And Various Dia Distribution Mohal)
Tender Value
3.81 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
4 days left
EMD
7635
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Aman Phase-Ii In Gp Baloh In Tehsil Bhoranj Distt. Hamirpur Hp (Sh:- Shifting And Relaying Of 80 Mm 100 Mm Dia Risingmain Gravity Main And Various Dia Distribution Mohal)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. |
| 2 | For Chiesling work |
| 3 | For Excavation in Soil |
| 4 | Providing form work of steel shuttering with steel plat as 3.15mm thich welded with angle iron in frame 30x30x5mm so as to fair finish including centring, shuttering floor two seiling not exceeding 4 mtrs. And removal of the same for insiturein forced conerete and plain concrete work in:- |
| 5 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 6 | Prov.and laying cement concrete 1:5:10 (1Cement: 5 Sand: 10 Graded stone agg.40mm nominal size) with 15% plum & curing complete excluding cost of form work in retaining Walls/ Breast Walls , the size of plums shall usually be 150mm to 300mm as per IPH specification. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 7 | Stone Bolder filling under floors as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Providing and laying cement concrete 1:3:6 ( 1 cement:3 sand :6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 9 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3.complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 10 | 6mm cement plaster to ceiling in cement mortar 1:4(cement :4 sand) complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 11 | Constructing course rubber hammer dressed shape oper surface drain with side wall 15x22 Ci Cement morter 1.6 Cement 6 Sand) and inside plasering with laying 10 CM Cement plaster 1:3 Cement (1 Cement.3 Concrte S Sand) 1:5:10 including ( Cement earth work S sand: 10 graded and stone aggergate of 10mm nominal size and 7.Scm cement concrte 1:2:4 and finished with floating coat of neat cement complete d5 per standerd design including of material in all leads and lift |
| 12 | Providing and laying cement concrete work 1:2:4 (1 Cement: 2 sand :4 graded stone aggregate 40mm nominal size ) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 13 | Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 14 | providing and fixing Aluminium Door including Zali Double Side, accessories like tower Bolt, Hinges, Handles etc complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 15 | Door of Size 1.80 x 1.10 |
| 16 | Door of Size 1.80 x 0.80 |
| 17 | Providing and fixing steel grills of required pettern in windows frames of windows etc. complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 18 | providing and fixing Aluminium Zali Double Side, accessories like tower Bolt, Hinges, Handles etc complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 19 | Door of Size 1.15 x 0.90 |
| 20 | Door of Size 0.45 x 0.60 |
| 21 | Applying priming coat over new steel & other metal surface after and I /c preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, red oxide/ zinc oxide as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead an lift. |
| 22 | Painting two coats excluding priming coat on new steel and other metal surface with enamal paint to give an even shade I/c cleaining the surface of all dirt dust and other foreign matter with enamel paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. |
| 23 | Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than wihite in all leads and lifts. |
| 24 | Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts ( |
| 25 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts |
| 26 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts |
| 27 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 28 | Manufacturing and supplying of stainless steel board of size 1.53mmx1.22mm of 304 No. stainless steel grade welded with 2.96 m Ht. of size 3'x3' steel pipe with solid base ISI mark of Approved Brand (Jindal/Tata) and quality complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 29 | Manufacturing and supplying of Indication board of size 1220mm x 920 mm made of 1.66 mm thick M.S. sheet supported in suitable frame structure of 40 mm MS pipe Heavy weight all over height 2750 mm , welded with 38x38x3mm strips complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 30 | Carriage of campus Board, Sign Board or Data Board from Distt. Headquarter Una to various sites i/c loading, unloading, Digging Mixture of Sand Cement Stone 1:3:6 and fixing at site complete as per direction and to the entire satisfcaction of Engineer-in-Charge. |
| 31 | Writing Letters or figure on any surface with white syn Enemal paint (stops, comas, hyphens and the like are not to be Measured and paid Separately) Indian letters/ figures complete in all respect. |
| 32 | Map painting, Designing, Sketching showing pump house Rising main, delivery tank, outlets, OHSR RD,RL,CCA & Roads & public stand post Abadi etc. as per direction and to the entire satisfcaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender