Tender For Landscaping Of Front Area Of Main C Us Incl The Area Between Central Library Admin Block Departmental Blocks At Gmc Anantnag [Adv. Cost ₹ 49.25 Lacs (₹ 41.74 Lacs Exclusive Of Gst + Gst@18% ₹ 7.51 Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
98500
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Landscaping Of Front Area Of Main C Us Incl The Area Between Central Library Admin Block Departmental Blocks At Gmc Anantnag [Adv. Cost ₹ 49.25 Lacs (₹ 41.74 Lacs Exclusive Of Gst + Gst@18% ₹ 7.51 Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in foundation trenches, drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10 SqMts on plan) including dressing of sides and ramming of bottoms, lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 50 Mtrs . |
| 2 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work at all levels in : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 4 | Providing and laying in position cement concrete in M-15 grade concrete excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 5 | Providing form work including Centering ,shuttering , strutting, propping etc.using ply wood sheeting with water proofing ply board (12 mm min.thickness) and removal of the same for( All work at all levels complete.) walls |
| 6 | Providing and laying in position Full colur vitrified tiles of size 400mm x 400mm conforming to ISI15622 laid on 1:4 mix i/c pointing of joints with white cement and matching pigment, all complete as per directions of incharge laid over 20mm thick (1:4) mix Mortor |
| 7 | Structural steel Work in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using CI etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.ORNAMENTAL WORK&carriages of all materials involved upto site of work complete |
| 8 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc completeOn CI work |
| 9 | Supply and Filling of Avavilabe earth incl Cutting from avaliable araa within Campus |
| 10 | Suupply & Spreading of good earth in required thickness as per directions of officer in-charge incl leveling and compaction all leads and lifts complete job |
| 11 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 12 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, stair cases of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16mm thick |
| 13 | Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding |
| 14 | Providing, supplying, constructing, installing, testing and commissioning of a complete ornamental fountain as per approved architectural/landscape design and drawings, including all materials, labour, tools, plant, machinery and incidental works, comprising earthwork excavation of fountain basin and associated trenches; disposal/stacking of excavated earth; preparation and compaction of sub-grade; providing and laying PCC levelling course and soling/sub-base; construction of RCC water-retaining fountain basin, walls, floor, central pedestal/plinth and other structural components in specified grade of concrete including reinforcement steel, binding wire, spacers, cover blocks, centering and shuttering; providing PVC/HDPE water bars at construction joints; internal waterproofing treatment of basin, walls, floor, joints and pipe penetrations; providing and fixing approved quality granite/natural stone flooring, wall cladding, coping, steps, borders and decorative works including cutting, dressing, fixing, pointing and polishing; providing and laying complete fountain water circulation pipe network in approved HDPE/UPVC/CPVC/SS pipes of suitable diameter and pressure class including suction and delivery lines, headers, manifolds, bends, tees, reducers, unions, flanges, supports, clamps and all necessary fittings; providing and fixing isolation valves, non-return valves, strainers, foot valves, drain valves and overflow arrangements; providing and installing suitably designed fountain circulation pumps of required discharge and head including motors, bases, suction/delivery connections and all accessories; providing and fixing central fountain jet/nozzle assembly and other decorative fountain nozzles including SS headers and regulating arrangements; providing complete filtration system comprising filters, strainers, valves, pressure gauges and associated circulation arrangements; providing automatic water-level control/make-up water arrangement including float/level sensor, solenoid valve and necessary piping; providing complete electrical installation including weatherproof fountain control panel, MCCB/MCB, contactors, overload protection, timers, selectors, indicators, terminal blocks, VFD where required, control wiring and all accessories; providing and laying suitable armoured/FRLS copper electrical cables from source to panel and from panel to pumps and lighting, including conduits, cable trays, glands, lugs, terminations and junction boxes; providing complete earthing and electrical safety arrangements including earth electrodes, earth conductors, bonding and RCCB/ELCB protection; providing, supplying and fixing IP-68 rated underwater LED/RGB/RGBW fountain lights of approved make and wattage including low-voltage transformers/SMPS, underwater cables, connectors, DMX/RGB controller and programmed lighting effects; providing drainage/scour and overflow arrangements with gratings and connection to approved drainage system; providing anti-skid granite/stone/paver flooring around fountain, decorative stone/pebble works and other associated landscape interface works; filling, cleaning and flushing of fountain; hydraulic pressure testing of all pipelines; water-tightness testing of RCC basin; testing of pumps, valves, nozzles, filtration system, automatic water-level system, electrical installation, lighting and control system; trial operation, balancing and adjustment of water jets and lighting effects; rectification of all defects during testing; and complete testing and commissioning of the fountain in all respects, including all materials, fittings, fixtures, equipment, transportation, loading/unloading, scaffolding, minor civil works, cutting/chasing, making good, labour, wastage and all other incidental works necessary to make the complete ornamental fountain fully functional, operational and aesthetically finished, as per approved drawings, specifications and directions of the Engineer-in-Charge. Dia of foundatin 8 Feet |
| 15 | Providing, supplying, casting/fabricating, assembling and fixing of 8 ft (2.44 m) long ornamental garden bench with decorative Cast Iron (CI) metal supports/legs and Mild Steel (MS) structural members, of approved architectural pattern, design and finish, complete in all respects, comprising heavy-duty decorative CI side supports/end frames with ornamental motifs, arm rests and suitable intermediate supporting members, accurately cast and properly fettled, free from cracks, blow holes, honeycombing and other casting defects, with load-bearing CI sections generally not less than 8 mm thick; providing and fixing structural Mild Steel rectangular hollow/suitable sections of minimum 50 × 20 mm size and minimum 4.0 mm wall thickness for seat/backrest framing, bracing, stiffeners and supporting members, including MS flats/angles/plates of adequate thickness wherever required, all MS sections being straight, true to dimensions and free from rust, pitting, cracks, laminations and other defects; providing and fixing seasoned, kiln-dried and properly treated timber/WPC/HDPE planks of approved quality, suitable for outdoor use, for seat and backrest, of suitable thickness and width, including cutting, shaping, edge rounding, drilling, sanding and finishing; overall bench length 8 ft (2.44 m), seat height approximately 450 mm and seat width 450–500 mm, with backrest height, inclination and profile as per approved architectural design; providing and fixing all necessary MS/SS/GI bolts, nuts, washers, screws, brackets, cleats and accessories for securely connecting the seat and backrest to CI/MS supports, including MS/CI base plates of minimum 6 mm thickness wherever required and heavy-duty galvanized anchor bolts for securely anchoring the bench to concrete/stone/tiled flooring; including cutting, drilling, welding, grinding, dressing and finishing of all MS members, with sound and uniform welds free from cracks, porosity and other defects; thoroughly cleaning and preparing all CI/MS surfaces by wire brushing/mechanical cleaning to remove rust, scale, oil, grease and loose material, followed by application of one coat of approved anti-corrosive metal primer such as red oxide/zinc-rich primer and two coats of approved exterior-grade synthetic enamel/PU paint of approved colour and shade, including proper surface preparation and drying between coats; timber, where used, shall be properly treated against termites, fungus, moisture and decay and finished with approved exterior-grade protective coating, while WPC/HDPE shall be UV-stabilized, weather-resistant and suitable for outdoor applications; all exposed edges and corners shall be suitably rounded/chamfered and the completed bench shall be rigid, stable, level, free from rocking, sharp projections and unsafe edges, capable of withstanding normal public-use loads without permanent deformation; all materials shall be of approved quality and conform to relevant IS/BIS specifications wherever applicable; including complete fabrication, assembly, transportation, loading, unloading, all leads and lifts, handling, labour, tools and plant, wastage, fasteners, anchoring, painting and all incidental works necessary for proper installation and completion of the ornamental garden bench in all respects, as per approved drawing/design and directions of the Engineer-in-Charge. |
| 16 | Providing and planting Thuja occidentalis / Thuja orientalis (Arborvitae) plants, 60–90 cm height, healthy and well rooted, including digging pits of required size, supply of good earth, FYM/compost, planting, staking wherever required, watering and maintenance complete. |
| 17 | Providing and planting ornamental conifer plants, such as Picea smithiana / Picea pungens, 1.20–1.50 m height, healthy and well developed, including excavation of pits, filling with approved earth/FYM, planting, watering, staking and complete maintenance. |
| 18 | Providing and planting ornamental deciduous flowering trees, such as Prunus cerasifera / Prunus serrulata or other approved flowering variety, 1.50–2.00 m height, including pit preparation, manure, planting, staking, watering and maintenance complete. |
| 19 | Providing and planting Berberis / Berberis thunbergii ornamental shrub, 30–45 cm height, bushy and healthy, including preparation of bed, supply of good earth and FYM, planting, watering and maintenance complete. |
| 20 | Providing and planting Hydrangea / flowering perennial shrubs, 30–45 cm height, healthy rooted plants, including bed preparation, supply of manure/compost, planting, watering and maintenance complete. |
| 21 | Providing and planting seasonal flowering plants, including Petunia, Marigold, Pansy, Salvia, Dianthus, etc., healthy nursery-raised plants, at approved spacing in prepared flower beds, including manure, planting, watering and maintenance complete. |
| 22 | Providing and planting low-height formal hedge plants, such as Euonymus japonicus / Lonicera nitida / Duranta, 30–45 cm height, including preparation of planting trench, supply of good earth/FYM, planting at close spacing, watering, trimming and establishment complete. |
| 23 | Providing and planting flowering perennial plants, such as Lavender, Salvia, Coreopsis, Gaura and similar approved varieties, including bed preparation, supply of compost/FYM, planting at required spacing, watering and maintenance complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender