Tender For Providing Balance Transformers, H.T. Lines In Shopping Centre In Secor 20P-Iii At Sirsa( Including 6 Years Defect Liability Period For Transformers And 3 Years maintenance And Defect Liability Period For All Other Items Free Of Cost) .A/Co
Tender Value
9.72 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
8 days left
EMD
19460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Balance Transformers, H.T. Lines In Shopping Centre In Secor 20P-Iii At Sirsa( Including 6 Years Defect Liability Period For Transformers And 3 Years maintenance And Defect Liability Period For All Other Items Free Of Cost) .A/Cost Rs. 9.73 Lacs E/Money Rs.19460/- Time Limit : 3 Months
BOQ
| Sl. No. | Item Description |
| 1 | 24.1.1EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 2 | 24.1.2EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 3 | 24.1.6EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. [Through Rate] |
| 4 | Job WorkSupply and Erection of 11kV Lightning Arrester as per approved makes and relevant IS specifications of DHBVN |
| 5 | Job WorkSupply and Erection of wooden cleats of size 4” wide 1’-6” long complete with 4 Nos. holes suitable to pass through 300/400 Sqmm single core cable complete in all respect upto the entire satisfaction of Engineer-in-charge |
| 6 | Job WorkSupply, installation, testing, commissioning of 3 Phase 11KV/0.433 KV-250V, 200 KVA Oil immersed, naturally cooled, Aluminum Wound Outdoor type Distribution Transformers with CSP (Completely self protected ) features with external microprocessor based four pole MCCB 300Amp. To 400Amp., 50kA strictly conforming to Nigam’s technical specification No. CSC-V/R-I/DH/UH/P and D/2010-2011 read with amendment thereof and as per relevant ISS as amended from time to time and losses conforming to 4 star rating of BEE as per Appd. Make and Specification of DHBVN/UHBVN including installation of transformer on existing platform upto the entire satisfaction of Engineer-in-Charge.Valtage Rated Frequency Permitted at 75ºCi) Maximum load looses at 50% load at 75ºC = 780 Watt ii) Maximum losses at 100% load at 75ºC = 2300 Wattiii) Warranty = 78/72 Months shall be one time The above losses are maximum allowable and there would not be any positive tolerance. |
| 7 | Job WorkSupply and Erection of 11kV polymeric Pin insulator 10 kN with GI Pin of approved make / specification of DHBVN. |
| 8 | Job WorkSupply and Erection of ACSR conductor of size 50mm2 conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments as per DHBVN specification including stringing and sagging jointing and binding with insulator at supports in all respect upto the entire satisfaction of Engineer-in-charge. |
| 9 | Job WorkSupply and Erection of LT PVC unarmoured cable of size 300 Sqmm single core with aluminium conductor 650/1100 V conforming to ISS 1554 (Part-I) of 1988 IS: 7098/Part-1/ 1988 with latest amendments upto entire satisfaction of Engineer-in-charge(Make: Grandlay, Polycab, Havells, CIRTINA) |
| 10 | Job WorkSupply and Erection of fuse unit of L.T. side suitable for 200 kVA transformer as per DHBVN specification complete with wooden board, aluminium bus bar MS clamps and MS nut and bolts including all petty material required up to the entire satisfaction of Engineer-in-charge |
| 11 | Job WorkSupply and erection of L.T. Aerial Bunched cable of size 120 Sqmm, 4 core plus 95 Sqmm messenger including making of necessary connection of make Polycab, Havell’s, Grandlay complete in all respect upto the entire satisfaction of Engineer-in-charge. |
| 12 | Job WorkSupply and Erection of PCC pole as per IS:1678-1960 specifications, 11Mtr. Long 140mm x 200mm at top and 140mm × 400mm at bottom with working load of 400 Kg buried 2.20 M in ground as per DHBVNL specification. |
| 13 | Job WorkSupply and Erection of 11 KV polymeric disc insulator 45 KN for 11 KV over head lines with fittings, TandC and complete with galvanized strain clamps, bolts, nuts, washers etc. as required as per DHBVN specification. |
| 14 | Job WorkSupply and Erection of Stay set for HT line complete with GSS 7/8 SWG, Disc Insulator, GI rod 20mm dia threaded up to 250mm length with Nut (wt.6.224kg), cross plate 460 mm of Angle 65×65×6mm (wt.5.330kg), Elbow (wt.2.240kg), clamp with Nut-Bolts etc as per DHBVN specification complete in all respect up to the entire satisfaction of Engineer-in-charge. |
| 15 | Job WorkSupply and erection of Galvanized steel item (Flat, Angle, Channel) including cutting bending to the required shape drilling hole carriage loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. |
| 16 | Job WorkSupply and erection of Galvanized Nut and Bolts of various sizes carriage loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge |
| 17 | Job WorkSupply and Erection of ACSR conductor of size 100mm2 conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments as per DHBVN specification including stringing and sagging jointing and binding with insulator at supports in all respect upto the entire satisfaction of Engineer-in-charge. |
| 18 | Job WorkSupply and Erection of Cradle Guard made of GI wire of SWG including fixing in 11kV line complete in all respect up to satisfaction of Engineer-in-charge. |
| 19 | Job WorkSupply, Stringing and Sagging 8 SWG G.I. Earth wire complete in all respect to the entire satisfaction of Engineer-in-charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof |
| 20 | Job WorkSupply and Erection of 11 kV G.O. Switch vertical mounting with heavy duty 9 Nos. post insulators suitable copper male and female contacts fixed on GI angle frame with G.I. Nut and Bolts including G.I. pipe and operating handle complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender