Tender For Repair/Replacement And Comprehensive Maintenance To Eqpt And Connected Items At Swimming Pool, Stp And Pump Houses , Testing Of Water In Every Quarter Including Purification Of Water And Repair/Maint Of Solar Water Heater And Connected Ite
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement And Comprehensive Maintenance To Eqpt And Connected Items At Swimming Pool, Stp And Pump Houses , Testing Of Water In Every Quarter Including Purification Of Water And Repair/Maint Of Solar Water Heater And Connected Items At 20 Wing Af Stn Under Ge (Af) Bagdogra
BOQ
| Sl. No. | Item Description |
| 1 | M & L for cleaning and sterilization of inside Underground reservoir capacity upto 25000 gallons. Dewatering of UG tank using DG set. Sludge removal by using buckets from inside of tanks. Scrubbing the inner surface and floor of tank. Flushing with chlorine and lime. second time flushing with clean water cleaning of undergrowth in and around tank complete all as specified and directed. |
| 2 | Taking out complete submersible pump set upto 12.5 HP alongwith the pipes 25 to 40 mm dia with the help of chain pulley block from bore well well after disconnecting electrical connections from panel, disconnecting from suction and delivery pipe lines, disconnecting column pipes, reassembling and lowering pump & motor into bore well complete, connecting, testing and commissioning alongwith connected items .cable re-fixing after receiving repaired and tested submersible pump ,rubber packing with proper alignment and making electrical connection complete including testing all as specified. |
| 3 | Transportation of submersible pump sets 3 phase any make and capacity 5 to 15 HP from pump house to contractor work shop for carry out necessary repair work to pump set submersible and transporting it back to site of water supply installation of AF Stn area. complete all as specified and directed. |
| 4 | Testing electric motor to ensure its actual condition, separating pump & motor from coupling. Rewinding of submersible motor, repairing the worn out parts to make fully serviceable capacity upto 5HP.Testing after repairs for desired output complete all as specified and directed. |
| 5 | Dismantling and refixing of submersible motor any make and any capacity 12.5 HP and reassembling complete after carry out necessary repair work & testing complete for smooth working to entire satisfaction of Engineer in charge complete all as specified and directed. Note :New parts/components to be replaced shall be measured and paid separately under supply only. |
| 6 | M&L for rewinding of submersible motor of Capacity 12.5 HP 3 phase 400/415 Volts any make and capacity as mentioned below existing size and gauge of PVC insulated single core copper winding wire submersible including all insulating material of make a approved complete all as specified and directed. |
| 7 | Supply only in replacement upper and lower housing bushes of any material complete suitable for 12.5 HP complete all as specified and directed. |
| 8 | Supply only in replacement Impeller suitable for 12.5HP complete all as specified and directed. |
| 9 | Supply only in replacement stainless steel bushes each set suitable for 12.5 HP submersible motor complete all as specified and directed. |
| 10 | Supply only in replacement submersible pump shaft each set suitable for 12.5 HP submersible motor complete all as specified and directed. |
| 11 | Supply only submersible pump shaft each set suitable for above 12.5 HP submersible motor complete all as specified and directed. |
| 12 | S&F in replacement thrust bearing each set suitable for 12.5 HP submersible motor complete all as specified and directed. |
| 13 | Supply only 'O' ring kit and oil seal kit suitable for any capacity complete all as specified and directed. |
| 14 | Repair of bowl bush of housing by proper machine work of housing and pump soft & replacement of bowl bush for 5 HP to 15 HP complete. |
| 15 | Supply only in replacement rubber packing 20mm thick consisting of 8/6\\" holes for 80 mm to 150 mm dia column pipe complete all as specified and directed. |
| 16 | S&F in replacement of PVC wire of submersible pump of 6 sqmm 3 core from pump starter to pump including all fitiings complete all as specified and directed. |
| 17 | Jointing the submersible cable by jointing kit of suitable size by means of jointing material & making the leak proof jointing complete all as specified and directed. |
| 18 | M & L for Taking out existing filter media like sand, gravel from Swimming pool filtration plant of capacity 2,000 LPH including removing from site and cleaning the internal surfaces of filtration plant using PVC wire brushes to remove all scales, iron particles and finally clay & other foreign particles with clean water complete all as specified and directed. |
| 19 | M& L for packing of following sizes of new filter media in layers of approved quality :- Gravel of size 1to 2 mm complete all as specified and directed. |
| 20 | All as per ser item No 19 above, but Gravel of size 0.4 mm to 0.8 mm complete all as specified and directed. |
| 21 | S & F Automatic Star-Delta starter in sheet metal enclosure type MK with single phase protection feature suitable for motor rating AC-3 phase, 415V, 15 HP , 9-14 A range complete all as specified and directed. |
| 22 | Taking down old unserviceable sluice valve from existing position and S&F cast iron sluice valve conforming to IS - 14846 PN 1.6 clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete all as specified and directed for 150 mm bore pipe |
| 23 | All as per ser item No 22 above, but for 100 mm dia complete all as specified and directed. |
| 24 | All as per ser item No 22 here-in-before, but for 80 mm dia complete all as specified and directed. |
| 25 | Taking out and rewinding complete centrifugal pump sets of capacity upto10HP after disconnecting electrical connections from panel, disconnecting from suction and delivery pipe lines with testing and commissioning alongwith connected items rubber packing, gasket with proper alignment and cable re-fixing after receiving repaired and tested centrifugal pump and making electrical connection complete including testing all as specified. |
| 26 | S & F Vacuum hose pipe 38 mm dia suitable for suction sweeper swimming pool including taking down complete all as specified and directed. |
| 27 | S & F in replacement of Vacuum pump upto 5 hp suitable for cleaning of swimming pool from dust particle including taking down complete all as specified and directed. |
| 28 | S & F Underwater LED lights for swimming pool including taking down complete all as specified and directed. |
| 29 | S & F in replacement of LED post top Lantern E-Top 30 Watt with low glare optical design acrylic opal diffuser with spigot made up of cast aluminium and wired with all accessories, 240V, including taking down of old unserviceable light fitting, pre-wired using 1.5 Sqmm, PVC insulated sheathed three core multistranded copper conductor cable, 1100V grade (Upto 3.0 RM) for connection passing through PVC Conduit or pole, from junction box to light fitting as per site requirement, testing & commissioning and as directed. sing 1.5 Sqmm, FRLS PVC insulated sheathed three core cable, 1100V grade with multistranded copper conductor (Upto 5.0 RM) passing through PVC conduit or pole, from junction box to light fitting and testing & commissioning. |
| 30 | S&F flood light 100 W at swimming pool around the pond for visible at night complete all as specified and directed. |
| 31 | S & F in replacement of PVC weather proof, hinged door, junction box with, 240V, Neutral link, three phase connector, with IP 66/67 protection suitable for outdoor installation on pole/wall surface and including with 1No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc including dismantling old unserviceable junction box complete all as specified and directed. |
| 32 | M&L PVC insulated copper cable ,1100 volts grade ,cross sectional area 3 core 1.5 sqmm for street light complete all as specified and directed. |
| 33 | M&L for rewinding of centrifugal compressor motor of any make and capacity as mentioned below existing size and gauge of PVC insulated single core copper winding wire submersible including all insulating material of make a approved:- (a) Capacity 2 HP to 5 HP 3 phase 400/415 Volts |
| 34 | M&L for servicing Air compressor including checking leakage in piston gas seals, check valves discharge line magnetic starter ,ball valve, water drains inlet filter pressure switch, pressure gauge power cable etc complete all as specified and directed. |
| 35 | M&L Electromagnetic and Diaphram type dosing pump with adjustable output for chemical dozing having 10 ltr/hr @10 Kg back pressure(2 Nos) , including suction and discharge tubing, ,FRP cum settling tank 170 ltr with lid, port hole ,inlet/outlet/drain connection ,level gauge, sludge deposition facility etc and fitted with speed reducing motor& SS-316 agitator combined with dosing tank 100 ltrs with lid, port, inlet/outlet/drain connection, level gauge but without speed reducing motor and SS-316 agitator etc; complete all as specified and directed. |
| 36 | M&L enamel paint for DI/CI rising line red colour and blue for delivery line for better operational purpose complete all as specified and directed. |
| 37 | Supplying and assembling including jointing, lowering & fixing in position ERW casing pipe fine cut of internal dia 200 mm bore of thickness 7mm conforming to IS 4270-2001 (ISI marked) including jointing of pipe by necessary electric arc welding both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified and directed. |
| 38 | Supply only copper sulphate for potable water copper sulphate pent hydrate content 98% impurities limit(i) Free sulphate and 0.2% max (ii) iron as Fe ppm 200 max toxic substance limit as pp of product (CuSo4 5H2O) (iii) Arsenic(AS-05) (ii) Cadmium (Cd) (iii) Chromium(Cr-05), (iv) Mercury (Hg-0.1) (v) Nickel (Ni-100), Lead(Pb-70), The copper sulphate should be powder or crystal (vi) Deep Blue colour and solubility 266g/l (20 Degree) complete all as specified and directed. |
| 39 | M&L for cleaning of olympic size swimming pool and diving pool and fountain area with PVC brushes, wipers, surf and tetrachloride acid. Rubbing the side walls and floor and buffing steel grills till complete shining for entire satisfaction Engineer-in-charge. |
| 40 | S&F full face chlorine gas mask with canister/respirator having twin filters complete all as specified and directed. |
| 41 | S&F rubber/ PVC hand gloves to handle chlorine gas/ liquid complete all as specified and directed. |
| 42 | Supply only alum white crystal (non ferric) non industrial top quality in 50 Kg packing complete all as specified and directed. |
| 43 | M&L mild steel H shape angle iron 25-150mm for supporting borewell ERW pipe by welding process to reduce compaction of borewell complete all as specified and directed. |
| 44 | S&F dial pressure gauge upto 14 kgs rating complete all as specified and directed. |
| 45 | Supply only Vaccum Brush for cleaning of swimming pool complete all as specified and directed. |
| 46 | Supply only Underwater Tile cleaner for swimming pool complete all as specified and directed. |
| 47 | Excavation in trenches in soft / loose soil n.exc 1.5 mtr wide n.exc 1.5 mtr deep getting out soil complete all as specified and directed. |
| 48 | Returning filling in including spreading leveling well ramming in layers n.exc 25 cm thick in a layers complete all as specified and directed.. |
| 49 | Removing excavated material (Soil) n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 50 | M & L for cement concrete type C2 1:3:6 (40 mm graded aggregate) for making good to disturbed surface of road etc. complete all as specified and directed. |
| 51 | Taking up or down GI water tubing 80 mm bore including fitting connections and cleaning tubing, fitting/ cutting threading of serviceable tubing for relaying and removal of unserviceable tubing complete all as specified and directed. |
| 52 | All as per item No 51 above, but for 50 mm bore complete all as specified and directed. |
| 53 | All as per item No-51 here-in-before, but for 40 mm bore complete all as specified and directed. |
| 54 | All as per item No-51 here-in-before, but for 25 mm bore complete all as specified and directed. |
| 55 | All as per item No-51 here-in-before, but for 20 mm bore complete all as specified and directed. |
| 56 | All as per item No-51 here-in-before, but for 15 mm bore complete all as specified and directed. |
| 57 | Re-fixing only old serviceable GI pipe incl fittings and connection in new or old position (Pipe obtained from item No 50 above ) of size 80 mm bore complete all as specified and directed. |
| 58 | All as per item No 57 above, but for 50 mm bore complete all as specified and directed. |
| 59 | All as per item No 57 here-in-before, but for 40 mm bore complete all as specified and directed. |
| 60 | All as per item No 57 here-in-before, but for 25 mm bore complete all as specified and directed. |
| 61 | All as per item No 57 here-in-before, but for 20 mm bore complete all as specified and directed. |
| 62 | All as per item No 57 here-in-before, but for 15 mm bore complete all as specified and directed. |
| 63 | Supply and laying the GI water tubing medium grade with all fittings in trenches 80 mm bore complete all as specified and directed. |
| 64 | All as per item No 63 above, but for 50 mm bore complete all as specified and directed. |
| 65 | All as per item No 63 here-in-before, but for 40 mm bore complete all as specified and directed. |
| 66 | All as per item No 63 here-in-before, but for 25 mm bore complete all as specified and directed. |
| 67 | All as per item No 63 here-in-before, but for 20 mm bore complete all as specified and directed. |
| 68 | All as per item No 63 here-in-before, but for 15 mm bore complete all as specified and directed. |
| 69 | Supply and laying/ fixing polyprolene random pipe (PP-R) PN 16 in three layer incl fixing of all fittings made out of PP –R as required for fixing to wall or laid in floor / ground complete all as specified and directed for 50 mm bore. |
| 70 | All as per item No 69 above, but 32 mm dia complete all as specified and directed. |
| 71 | All as per item No 69 here-in-before, but 25 mm dia complete all as specified and directed. |
| 72 | All as per item No 69 here-in-before, but 20 mm dia complete all as specified and directed. |
| 73 | S&F butterfly valve both end flanged of size 100mm complete all as specified and directed. |
| 74 | Collecting water sample from various Pump Houses of GE(AF) Bagdogra in sterilized bottles and transporting to lab as per conditions prescribed by the lab.Testing of the water sample to be carried out for Physical ,chemical and bacteriological testing for potability of water .The following parameters are to be tested by NABL approved (A)Physical characteristics 1.Turbidity 2.PH value 3.Total Dissolved solids (TDS) 4.Taste 5. colour (B) Chemical characteristics 6. Iron 7.Manganese 8. Nitrate 9.Flouride 10.Residual Chlorine 11. Copper 12. Alkalinity 13. Odour 14. chloride 15.Total Hardness 16. Mercury 17.Arsenic 18.Lead (C) Bacteriological Test 1. Coliform Bacteria 2. E.Coli 3. Salmonella complete all as specified and directed |
| 75 | Supply only Pool sanitiser Pool Standard G-24 for killing of microorganisms and prevention of scaling and stains complete all as specified and directed. |
| 76 | Supply only Pool Standard B-23 for killing of all types of algae and prevention of algae crust formation complete all as specified and directed. |
| 77 | Supply only Pool clarifier Pool Standard A-94 for clarity of water and prevent build up of particles in pool complete all as specified and directed. |
| 78 | Supply only plastic cylindrical sealed disposable sanitizer Refill containing solid chlorine for cholrination and disinfection of drinking water complete all as specified and directed. |
| 79 | Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield complete all as specified and directed. |
| 80 | Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and directed. |
| 81 | S&F pH & chlorine testing kit suitable for testing with O-Tolidine solution for regular test including 500ml solution and samples for comparison in the wooden packing complete all as specified and directed. |
| 82 | S&F in replacement rubber PVC hose pipe, superior quality, heavy duty, 80 mm dia complete all as specified and directed. |
| 83 | Dismantling entire air compressor/blower backwash system of existing capacity and repair of impellor, repair/replacement of shaft, replacement of bearing, air filter apparatus, suction and delivery pipe, replacement of two fan belts, change of oil, lubrication and reinstalling after complete servicing , painting and proper connection of wire of motor with suitable thimbles complete all as specified and directed. |
| 84 | Taking out complete centrifugal pump set for fire fighting 450 LPH and disconnecting electrical connections from panel, disconnecting from suction and delivery pipe lines, connecting, testing and commissioning alongwith connected items .cable re-fixing after receiving repaired and tested submersible pump ,rubber packing with proper alignment and making electrical connection complete including testing all as specified. |
| 85 | Transportation of submersible pump sets 3 phase any make and capacity 5 to 15 HP from pump house to contractor work shop for carry out necessary repair work to pump set submersible and transporting it back to site of water supply installation of AF Stn area complete all as specified and directed. |
| 86 | Dismantling of centrifugal pump 450LPM, head 90 mtr and reassembling complete after carry out necessary repair work & testing complete for smooth working to entire satisfaction complete all as specified and directed. Note :New parts/components to be replaced shall be measured and paid separately under supply only. |
| 87 | Dismantling of centrifugal pump 2850LPM, head 90 mtr and reassembling complete after carry out necessary repair work & testing complete for smooth working to entire satisfaction complete all as specified and directed. Note: New parts/components to be replaced shall be measured and paid separately under supply only. |
| 88 | M&L for rewinding of motor of any make and capacity as mentioned below existing size and gauge of PVC insulated single core copper winding wire submersible including all insulating material of make a approved (a) Capacity 3 phase 400/415 Volts complete all as specified and directed. |
| 89 | M&L for rewinding of submersible motor of any make and capacity as mentioned below existing size and gauge of PVC insulated single core copper winding wire submersible including all insulating material of make a approved (a) Capacity 100HP 3 phase 400/415 Volts complete all as specified and directed. |
| 90 | Repair of bowl bush of housing by proper machine work of housing and pump soft & replacement of bowl bush for 5 HP to 15 HP complete all as specified and directed. |
| 91 | Dismantling entire air electric driven pump 450 LPH head 60 mtr and repair of impellor, repair/replacement of shaft, replacement of bearing, air filter apparatus, suction and delivery pipe change of oil, lubrication and reinstalling after complete servicing , painting and proper connection of wire of motor with suitable thimbles complete all as specified and directed. |
| 92 | M&L for heavy duty rubber pressure washer hose pipe for MT washing motor of 15mm incl nut nozzle/jet with controller and fixing arrangement incl nut bolts clamps complete all as specified and directed. |
| 93 | Supplying and laying in replacement synthetic Rubber insulated mats 25 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. complete all as specified and directed. |
| 94 | S&F in replacement of gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50mm bore including fixing nipple, union or fitting as per site requirement complete all as specified and directed. |
| 95 | All as per item no 94 above, but 40mm bore complete all as specified and directed. |
| 96 | All as per item no 94 here in before but 25mm bore complete all as specified and directed. |
| 97 | All as per item no 94 here in before but 20mm bore complete all as specified and directed. |
| 98 | S&F in replacement of mild steel / cast iron coupling suitable for centrifugal pump of rating 25/30/40 HP complete with rubber tyre / coupling nuts bolts and rubber washer, complete all as specified and directed. |
| 99 | Repair and servicing of suction sweeper comprising of 2 or 3 HP electric motors rating at 0.8 power factor, 3 phase, 415 volts, 50 cycles per second directly coupled to centrifugal pump set of matching capacity 50x50 Suction/Delivery, 1500 RPM, mounted on common foundation including replacement of parts complete all as specified and directed. Note: Parts of motors shall be measured and paid for separately here in after as supply |
| 100 | M&L rubber coupling suitable for suction pump set including nuts and bolts as per sample complete all as specified and directed. |
| 101 | M&L in replacement of rubber toughened wheels, high tensile, from trolley complete all as specified and directed. |
| 102 | S&F Teflon pipe 9.5mm dia with PVC nuts and nipple 5 mtr length for chlorine gas complete all as specified and directed. |
| 103 | M&L booster pump upto 1 hp for making the same functional including installation & testing, complete all as specified and directed. |
| 104 | M&L for taking down solar water heating system of 300 ltrs capacity completely by replacing worn out/deteriorated accessories of solar water heater including reassembling, with suitable nut, bolt, washer etc with necessary connection and installing/ testing complete all as specified and directed. Note- Accessories will be measured & paid separately as supply only. |
| 105 | M&L for taking down solar water heating system of 200 ltrs capacity completely by replacing worn out/deteriorated accessories of solar water heater including reassembling, with suitable nut, bolt, washer etc with necessary connection and installing/ testing complete all as specified and directed. Note- Accessories will be measured & paid separately as supply only. |
| 106 | Supply only hose pipe of 100mm length suitable for 20mm bore GI pipe complete all as specified and directed. |
| 107 | Supply only electric heater 3 KW rating, single phase, 240 volts complete all as specified and directed. |
| 108 | Supply only toughened sun glass of collector, thickness 4mm suitable size for 300 Ltr capacity solar heater |
| 109 | Supply only toughened sun glass of collector, thickness 4mm suitable size for 200 Ltr capacity solar heater complete all as specified and directed. |
| 110 | Supply, laying, & testing in replacement, GI Pipe of 25mm bore medium grade ISI marked in trenches or as per existing with all fittings including earth work complete all as specified and directed. |
| 111 | Supply, laying, & testing in replacement, GI Pipe of 20 mm bore medium grade ISI marked in trenches or as per existing with all fittings including earth work complete all as specified and directed. |
| 112 | Supply, laying, & testing in replacement, GI Pipe of 15 mm bore medium grade ISI marked in trenches or as per existing with all fittings including earth work complete all as specified and directed. |
| 113 | Supply only neoprene gasket complete all as specified and directed. |
| 114 | M&L descaling the solar water heater tank of capacity 100/200/500 ltrs complete all as specified and directed. |
| 115 | M&L repair to collector by drilling & welding of fins complete all as specified and directed. |
| 116 | M&L in replacement cladding on existing GI pipe of 20mm dia by replacing with and including insulation Rockwool 2\\" thick with density 50Kg/cum, chicken wire mesh, aluminium sheet of 26 gauge and steel screws as per existing complete all as specified and directed. |
| 117 | S & F in replacement (makeup) steel tank of 5 ltr capacity for solar water heating system complete all as specified and directed. |
| 118 | S & F in replacement stainless steel hot water tank of 200 ltr capacity for solar water heating system complete all as specified and directed. |
| 119 | Maintenance and repair to water supply services of leakage blockage for GI pipe line of 15mm to 80mm dia including dewatering and necessary excavation returning / filling or cutting, chasing and making of disturbed surfaces as per existing surface and replacing worn out GI pipe max upto 2 mtrs long including cutting threading and replacement of requisite fittings as socket, union, tees, long screwes nipple, hexa nipple , reducer etc complete all as specified and directed. |
| 120 | S&F Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 121 | Maintenance and repair to leakage/blockage of water supply CI/DI pipe line of 80 mm to 300 dia size including necessary excavation required for taking out burning out lead joint or damaged rubber ring/hole from position and making the disturbed surfaces as per existing surface after replacing new spun yarn and lead joint or Tyton joint/D-joint or necessary fitting required as per site properly and making the pipe line leak proof completely to the entire satisfaction complete all as specified and directed. :- (Note Leak on OHTs vertical pipes and under ground pipes are also included in this item) |
| 122 | M&L for replacement of old us base frame of centrifugal pump set made out of angle iron of size ISA 5050, 50x50x6mm or medium channels of size MC-100 including cutting, drilling hole or welding work required to make desired shape or existing size duly paint with one coat of primer red oxide and two coat of enamel paint complete all as specified and directed. Note: The base frame should be grouted complete in PCC foundation and should be taken necessary bearing strength before the installation of induction motor. |
| 123 | Development of tube well by over pumping 25% using suitable size/type of pump after completion of item above, including yield testing for tube well as per IS requirements complete all as specified and directed. NOTE :- Yield test of bore well shall be carried out in the presence of rep of Accepting Officer. |
| 124 | S&F in replacement MCCB 4P 25KA breaking capacity 250 Amp, 415 V adjustable type complete all as specified and directed. |
| 125 | S&F in replacement MCCB 3P 25KA breaking capacity 200 Amp, 415 V adjustable type complete all as specified and directed. |
| 126 | S&F in replacement MCCB 3P 25KA breaking capacity 160 Amp, 415 V adjustable type complete all as specified and directed. |
| 127 | S&F in replacement of Exhaust fan steel body AC single phase 300mm sweep with blades, frame and louvers complete including making a hole for fixing the exhaust fan complete all as specified and directed. |
| 128 | supply only complete water testing kit for lead, bacteria, hardness, fluoride, pH, iron, copper, nitrite, nitrate, Mg, Zn, Hg, total alkalinity, Hardness, total sulphide, NaCl etc complete all as specified and directed. |
| 129 | S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete and making electric connection with PVC insulated copper conductor (multistrand) cable of 1.5 sq mm size complete all as specified and directed. |
| 130 | Supplying & fixing street light fitting bracket made out of 32mm bore Steel Tube \\"Light Grade\\" bent to shape, 1.5 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 40x5 mm with bolts, nuts and washers, complete as per sample and design complete all as specified and directed. |
| 131 | M&L for 2 mm thick MS sheet cover plate with locking arrangements in existing valve pit and removing of old / rusted MS cover incl painting complete all as specified and directed. |
| 132 | M&L for Mild steel framed works such as grills, gratings etc with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; foundations, ladders; framed balusters; walk ways; railings; frame works of water tank and similar work confirming to Fe.290.Gde-E-165 including nuts, bolts, washers, welding, binding, cold or hot, drilling holes for bolts, in any shape or size inclusive of one primer coat, one under coat and one finishing coat of paint including taking down existing complete all as specified and directed. |
| 133 | M&L for painting of GI/CI/DI and filter plants/pipe, panel at any installation with existing colours complete all as specified and directed. |
| 134 | M&L in replacement for Mild steel plates of any size, plain or chequered, 5mm thick, Fe 410-W (Gde-E-250) quality-A for cover of pits and of sump at swimming pool or any other installation including welding works wherever required complete all as specified and directed. |
| 135 | Taking out unserviceable Non return Valve including supply, fixing and testing of new Cast Iron swing check type Non Return (Reflux) Valve With SS-304 Disc and Nitrile Rubber Lining. Shell Test Pressure - 24.5 Kg/cm g, Seat Test Pressure 16 Kg/cm as per IS 5312, part-I, PN 1.6 without bypass arrangement, ends flanged suitable for 150 mm bore pipe complete with nuts /bolts and washers of appropriate size and rubber gasket etc complete all as specified and directed. |
| 136 | Taking out unserviceable Non return Valve including supply, fixing and testing of new Cast Iron spring check Valve With SS-304 Disc and Nitrile Rubber Lining. Shell Test Pressure - 24.5 Kg/cm g, Seat Test Pressure 16 Kg/cm as per IS 5312, part-I, PN 1.6 without bypass arrangement, ends flanged suitable for 100 mm bore pipe complete with nuts /bolts and washers of appropriate size and rubber gasket etc complete all as specified and directed. |
| 137 | Supply and laying in replacement of existing unsv XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 V grade of cross sectional area 35 sqmm 3.5 core complete all as specified and directed. |
| 138 | Supply and laying in replacement of existing unsv XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 V grade of cross sectional area 25 sqmm 4 core complete all as specified and directed. |
| 139 | Supply and laying in replacement of existing unsv XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 V grade of cross sectional area 10 sqmm 4 core complete all as specified and directed. |
| 140 | Supply and laying in replacement of HDPE DWC pipe. 50 mm dia laid in trenches for cable protection at road crossing etc including necessary making good or fixing on wall / poles of any type, secured with clamps complete with all fittings laid in trenches complete all as specified and directed. |
| 141 | Supply and laying in replacement of Tubes, 'light grade', galvanised iron, 50 mm dia laid in trenches for cable protection at road crossing etc including necessary making good or fixing on wall / poles of any type, secured with clamps and required boring under road or hard surfaces complete with all fittings laid in trenches complete all as specified and directed. |
| 142 | Digging of soil/demolition of PCC and making one brick thick pit of size min 1200mmx1200mmx1200mm or as per site requirement including earth work and PCC in foundation (1:3:6) Type C2 using 40mm graded stone aggregete 150 mm thick, PCC in coping on top (1:2:4),Type B1 using 20mm graded stone agregate 100mm thick including rendering 15mm thick and two coat of white wash on exposed surfaces on external wall above ground level and making caustic/soda/lime solution including required chemical to absorb Chlorine gas for safety purpose complete all as specified and directed. |
| 143 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or under the over head tank/road cutting, ramp, etc complete all as specified and directed. |
| 144 | M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 145 | M & L for cement concrete type C2 1:3:6 (40 mm graded aggregate) for making good to disturbed surface of road etc. complete all as specified and directed. |
| 146 | M & L 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in path or under OHT, Ramp, walkway, header or against cutting of road etc including form work complete all as specified and directed. |
| 147 | M&L for rubber moulded machine pressed precast concrete interlocking paver with gray cement confirming to IS - 15658-2000 of 60 mm thickness, M-35 grade as in path, hard standing etc laid over and including 25mm compacted sand cushioning ,including 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but n. exc 250mtr, complete all as specified and directed. |
| 148 | Demolition of cement floor or tiles of any description/thickness, laid bedded and pointed in any mortar in floors, aprons etc. removing the rubbish from the defence land complete all as specified and directed. |
| 149 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender