Tender For Upgradation/Beautification Of Animal House At Gmc Srinagar
Tender Value
30.78 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
2 days left
EMD
61560
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation/Beautification Of Animal House At Gmc Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | Civil Part |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet |
| 6 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 sqcm. and above |
| 7 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead. |
| 8 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position. Budloo / Fir wood |
| 9 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws .12.34.5 Budloo/fir wood |
| 10 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil 50 meter beyond 1m from cutting edge |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with .1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level .1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 16 | Foundations, footings, bases for columns. |
| 17 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Suspended floors, roofs, landings, balconies and access platforms. |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 20 | Providing & laying of stone soling hand packed in foundation and plinth including ramming, watering, compaction & lead lifts all carriages upto site of work complete job; All inclusive. |
| 21 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 22 | 12mm Cement plaster of mix:13.1.2 1 : 6 ( 1 cement : 6 fine sand) |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.11.52.2 Size of tile 600x600 mm |
| 24 | Providing and Fixing vitrified wall tiles with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, with spacers of 3mm including epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of tile1200x600 mm |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 26 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 27 | Providing and ?xing of colour coated rain gutters 150mm wide 0.5mm thick incl ?xing with M.S clips and all ?ttings and ?xtures, all cost and carriages, scaffolding, making necessary connections with rain water pipes complete job. |
| 28 | Providing & fixing PVC pipe heavy duty Type-B (prince, Finolex), Water or Vent pipe with cowl. And necessary bends , junctions, reducers, rubber washers , adhesives , complete job also including cost of all fittings and fixture like bends Tee's Collars Sockets Spigots ,reducers ,traps, washers, Earth work, Sand Cushion and Back Filling wherever required as per the direction of Engineers in charge. |
| 29 | 50 mm diameter |
| 30 | 63 mm diameter |
| 31 | 75 mm diameter |
| 32 | 110 mm diameter |
| 33 | 150 mm diameter |
| 34 | PVC Floor Trap |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 36 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 37 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 38 | PN-16 pipe , 50mm OD |
| 39 | Providing and fixing PPR ball valves for 32mm dia. |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 41 | Providing/fixing of C.P fittings of approved make jacquar or equivalent . |
| 42 | Bib cock |
| 43 | Health faucet |
| 44 | Angle value |
| 45 | Waste pipes |
| 46 | Grating |
| 47 | Wall mixer |
| 48 | Wash basin mixer of approved brands |
| 49 | CP hooks/ towel hanger |
| 50 | Soap case |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 52 | Providing and fixing white vitrous wash basin with C.I/MS. brackets, with pedestal including all necessary fitting and fixtures, painting of fittings and brackets, cutting and making good walls wherever required complete job. inclusive all as per direction of Engineer Incharge |
| 53 | Providing and fixing of vertical roller blinds on internal side of windows of approved quality and material including cost of channel, buds, thread, nails, brackets,labour and carriage upto site complete job. |
| 54 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 55 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 56 | 1mm Thick |
| 57 | 2mm Thick |
| 58 | Providing and applying high-quality, ready-mixed acrylic putty of approved make to wooden doors, windows, frames, paneling, furniture, railings, and other timber surfaces for filling cracks, nail holes, joints, dents, surface imperfections, and minor defects, including cleaning of the surface, removal of loose particles, application of putty with putty knife, allowing proper drying, sanding smooth with emery paper to achieve a uniform finish, complete in all respects as per the directions of the Engineer-in-Charge. |
| 59 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 60 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 61 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 62 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 63 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 64 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including making good the same etc. complete as per direction of Engineer-in-charge. |
| 65 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal Size),inside plastering 15 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement complete as per standard design Inside size 45x45x75 cm including providing and fixing of MS steel frame of 40x40x5mm angle and cover of 5mm MS Plate. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including all carriage of material as involved upto site of work complete job; all inclusive |
| 66 | Tile cleaning with chemical wash including scrubbing and removal of stains, dirt, and grime using approved chemicals as directed by EIC, complete in all respects and to the satisfaction of the EIC. |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 68 | Providing and fixing wire Mesh for shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws as per direction of Engineer-in-charge :incl cost of beading complete job |
| 69 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 70 | For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 71 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 72 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded fiber glass wool with density 24 kg/cum |
| 73 | Providing and fixing ACP 3mm multi coloured ( Fire retardant) in partitions, ceilings, shutters frames etc including cost of rubber, neoprene gasket,taping, waterproof silicon sealent ,or as required at site as per the directions of concerned engineer in charge |
| 74 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 75 | Providing and Fixing 19mm thick plyboard of approved quality and brand for cabinets/ Almirah fixed in position, including carriage complete job as per the directions of Engineer Incharge.;all inclusive. |
| 76 | Providing and Fixing 12mm thick plyboard of approved quality and brand for cabinets/ Almirah fixed in position, including carriage complete job as per the directions of Engineer Incharge.;all inclusive. |
| 77 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 78 | Providing and fixing precoated galvanised steel sheet roofingaccessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm) |
| 79 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 80 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) |
| 81 | Repair/Re-fixing of damaged aluminium partitions,windows and doors (Fixed/Sliding) by way of removing & repairs to damaged members wherever necessary and then placing in proper position after making repairs Complete. |
| 82 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 83 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 84 | Engagement of plumbers, carpenters, blacksmith and helpers for removing old / damaged sanitary items, damaged pipes,aluminium doors/partitions, removing and refixing wooden flooring for cleaning of bird dropping from attic etc including stacking of serviceable material and disposing of unserviceable material as directed by the Engineer Incharge |
| 85 | helper |
| 86 | carpenter |
| 87 | plumber |
| 88 | Supply and laying of PVC medium grade Conduit to be laid on surface with screws fixed in rowel plugs complete with all allied accessories like bends, tees etc.25/19 mm dia for paving way of laying of wires of heating points /circuits ,machine points /circuits and sub mains .The Job includes cutting of walls with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P.O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to affected area and whole walls for matching of same, wherever required, including junction boxes, fan boxes, etc. |
| 89 | Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job. |
| 90 | Sand and Aggregates for an average lead of 20Kms |
| 91 | Bricks for an average lead of 25Kms |
| 92 | Electrical Part |
| 93 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as per IS Standard. Group C |
| 94 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required as per IS standard |
| 95 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 96 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 97 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. as per IS standard |
| 98 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required as per IS Standard. |
| 99 | 2 X 1.5 sq.mm+1 X 1.5 sq. mm earth wire. |
| 100 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 101 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 102 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 103 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 104 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. |
| 105 | Supply and fixing 16 way (Double door) (SPN type) MCB distribution board 240V on recess /surface completed with cooper bus bars neutral bars earth bars including earthing |
| 106 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 107 | Single pole |
| 108 | single pole & Neutral |
| 109 | 32A (DP) |
| 110 | 50A/ 40A (DP) |
| 111 | Supply, Installation, Testing and Commissioning of heavy duty 450mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. Commercial series |
| 112 | Supply installaition ,testing and commissioing of 24 Inch Exhaust Fan with autometic shutter constructed from durable rust proof Aluminum material with High Speed 1400RPM |
| 113 | Supply, Installation, Testing and Commissioning of Ceiling Fan compliant to IS 374:2019 1200mm Sweep suitable for 230 V, 50 Hz, single phase AC supply, fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required |
| 114 | Supply installiation testing and commissioning of 400mm wall fan of standard quality suitable for 230 V, 50 Hz, single phase AC supply, fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required |
| 115 | Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/ Rectangular) SMD type of Powder coated die cast /Extruded aluminum Body including trim material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.?0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, \\"complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. . . |
| 116 | 22 watt |
| 117 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 118 | Supply & fixing of 3 Pin 5A ceiling rose on the existing junction box /as required including connections |
| 119 | Providing, installation, commissioning and testing horzontal/vertical Hot water Geyzer of approved make including fixing with bolts/ fasteners/PVC connection etc. Venus, Recold, Hindware, Havells, Jaquar, Crompton of required capacity fittings and fixtures all complete wherever required in the course of completion. complete including cutting and making good the walls, wherever required job. 50 liters |
| 120 | Supply/Installation/Testing and Commissioning of 24 watt 4-feet long LED batten 6000/6500k Light having extruded aluminium heat sink with anti-glare diffuser with energy efficient electronic driver CRI greater than 80 with minimum sytem lumens 4000 and including connection with multistrand copper conductor 3-core cable etc as required at site with burning hours greater than 50000 Hours having system lumens 110 Lm/watt |
| 121 | Supply and drawing following size of FRLS PVC insulated Copper Conductor single core cable in the existing surface /recessed conduit as required |
| 122 | 3X1.5Sq.mm |
| 123 | 3X2.5Sq.mm |
| 124 | 3X 4Sq.mm |
| 125 | 3X 6 Sq.mm |
| 126 | Mechnical Part |
| 127 | Supply, Installation, Testing and Commissioning of 2.0 TR capacity inverter type, reversible Hot and Cold Split ACs of minimum 4 star rating. The units shall be remote controlled along with all the latest features that are in vogue in latest models like; Remote controlled operation, Controllable Flap LCD, ON/OFF Timer, Fuzzy Logic, chaos flow, jet cooling etc. The job further includes fixing indoor unit on wall by using suitable clamps and outdoor units on MS powder coated wall stand. The job further includes all the allied works for complete commissioning of ACs like providing and laying of copper tubing for carrying refrigerant, insulating copper pipelines with nitrite insulation, filling up with refrigerant gas(R-32/11-410/R-4-07 Green Refrigerants), multi stranded un-sheathed 4.0 sq.mm two core copper conductor, control cable and PVC Conduit etc. The job includes fitting of OS KVA Servo Stabilizer and all the allied electrical works including providing/fitting of 32 Amp, double pole MCB along with two-way enclosures with 32 Amp industrial type socket and top combine followed by due earthing of AC unit with 25 sq.mm single core copper conductor cable. All tools, tackles and consumable items shall be arranged by the firm. Any shortfall or requirement during complete Supply, Installation, Testing and Commissioning of the above work shall be inclusive to the job. Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (EEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329,capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS :1391 Part II 2023. The system shall be able to operate from -10 Deg C up to 42 Deg C (out door ambient temperature). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender