Tender For Annual Maintenance Contract For Stage (Civil ) For The Year 2026-27Sub Division-I (North) (Districts Srinagar, Ganderbal, Pulwama, Baramulla And Kupwara)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Sep 2026
5 days left
EMD
40000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Contract For Stage (Civil ) For The Year 2026-27Sub Division-I (North) (Districts Srinagar, Ganderbal, Pulwama, Baramulla And Kupwara)
BOQ
| Sl. No. | Item Description |
| 1 | Any of the items provisioned in the JKSOR 2022 as and when required to be taken up, The percentage qouted by the contractor shall be applicable on all the items and rates of JKSOR 2022.(any typorgraphical error in the unit shall be corrected during allotment) |
| 2 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 12mm thick imported wood. |
| 3 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws.Imported wood. |
| 4 | Providing and fixing of heavy duty box type double action floor spring including cutting and making good the floor ,removing and refixing of door and all repairs.(Godrej or Eddy, Samrat make or equivalent. (3 ply). |
| 5 | Providing and fixing 12 mm thick commercial ply wood with necessary screws and nails, including a coat of approved wood primer on one face, and fixed on wooden/steel frame work excluding cost of frame work but including cost of screws, nails complete job as per direction of Engineer –incharge |
| 6 | Providing and fixing 6 mm thick commercial ply wood with necessary screws and nails, including a coat of approved wood primer on one face, and fixed on wooden/steel frame work excluding cost of frame work but including cost of screws, nails complete job as per direction of Engineer –incharge |
| 7 | Providing and fixing 4 mm thick commercial ply wood with necessary screws and nails, including a coat of approved wood primer on one face, and fixed on wooden/steel frame work, complete as per direction of Engineer –incharge (Frame work shall be paid for separately). |
| 8 | Providing and fixing of wooden cornice of (Triangular shape) including cost of nails, screws and two or more coats of synthetic enamel paint over single coat of wood primer. 40mmx40mm |
| 9 | 50mmx50mm |
| 10 | 75mmx75mm |
| 11 | Providing and fixing of M.S rod locks Six levers with inbuilt sliding bolt, screws ,nuts (heavy duty) complete of approved quality (Godrej, Link or equivalent make) |
| 12 | Providing and fixing of sign boards/Name plates of different sizes made of 6mm thick P VC sheet with digital computerized letters self adhesive on them in bold form all complete including nails, screws, hanging hooks ,adhesive ,P VC tapes etc. complete job. |
| 13 | Providing and fixing of Plain G.I colour sheet of thickness 0.5mm including cost of nails, screws etc all complete wherever required. |
| 14 | Providing & fixing imported wood of all types to the frames of partition, ceilings, backing including finishing the wood smooth, applying one coat of wood primer and two coats of synthetic enamel paint. |
| 15 | Providing & fixing transparent polycarbonate sheets to windows, partitions etc of standard make including cost of adhesive, wooden beading/nails. (4mm thick sheet). |
| 16 | Providing & laying quarry muck in layers, rolling with power roller of 8 to 10 metric tonne, including watering, all leads, lifts, taxes, carriage complete job. |
| 17 | Providing & fixing of 18mm thick rubber wood board in racks, almirah's etc.including screws, nuts, bolts etc complete job. |
| 18 | Providing and fixing of hollow section PVC Planks (Paneling) for ceiling /lining tongued and grooved of any colour, design and pattern section of panels 10x165 mm Wallthickness1.00mm ±0.1mm including cost of plain beading/PVC angle beading wherever necessary of size25x25 x1.5mm with screws ,nails etc complete excluding cost of frame work (ceiling joists) quality ,shade and colour approved by Engineer-in- Charge(Duroplast or equivalent make). including carriage from source to site of work complete job. |
| 19 | Repairs to aluminium work for doors/windows by way of dismembering the door, windows, refixing after resizing, replacement of hinges, screws, cleats etc. If any aluminium member to be replaced shall be paid in basic aluminium item, as per SSR. |
| 20 | Providing & fixing of stainless steel sliding lock to glass Almirah's of approved make including all necessary fittings complete job. |
| 21 | Providing & fixing aluminium G-channel for sliding doors with necessary screws, nuts complete job. |
| 22 | Providing and fixing of superior quality imported wooden flooring including the base cushion of 10mm foam sheet and fixed with water based adhesive complete job. |
| 23 | Providing and fixing teak woodply sheets with one side decorative face, on the doors/ceiling/walls with necessary nails/screws adhesive complete as per directions of engineer-in-charge (4mm thick sheet). |
| 24 | Providing & laying of dry stone soling/boulders of required grade/size as per site requirement including watering, ramming, dressing, carriage of materials complete job. |
| 25 | Providing and laying of stone dust filling under floors in layers including watering amd ramming complete job. |
| 26 | Providing and fixing of wood work in different kinds of frames of false ceilings, partitions, trusses and purlins etc. using poplar wood. |
| 27 | Providing & fixing superior quality brass door (ornamental) handles with necessary screws (200mm) complete job. |
| 28 | Providing & fixing of ISI marked 18mm/19mm thick commercial plyboard (Ply to Ply) of standard make including necessary screws, nails complete job. |
| 29 | providing & fixing of multipurpose locks to cupboards, Almirah's of standard make and manufacture. |
| 30 | Providing & fixing aluminium aldrop of standard make with necessary screws (size 8\\"). |
| 31 | Providing and fixing 12mm thick wooden panelling (TNG) in required design/pattern including the cost of all fittings and fixtures (Imported wood) complete job. |
| 32 | Providing & fixing of vertical blind curtains of any colour/pattern of superior quality with G.I Channel pelmet including manual opening and closing arrangements, nails, steel screws all complete. |
| 33 | Providing & fixing synthetic washable wall paper to walls, ceilings with adhesive, of any colour, design pattern of standard make including cost of adhesive quality/make to be approved by Engineer-in-charge. |
| 34 | Providng and fixing of 10mm thick foam sheets to walls/floors including cost of adhesive etc. Complete job. |
| 35 | providing & fixing dull mica/sun mica 0.8mm thick sheet to wooden surfaces including cost of adhesive complete job. |
| 36 | providing & mixing water proofing compound with cement concrete/cement mortar as specified by manufacturer, of standard make. |
| 37 | Providing and fixing pre-laminated (one side) ply board 18mm thick in shelves, wardrobes, storage lockers, partition, including cost of nails, screws, adhesives but excluding base frame work wherever required. |
| 38 | Providing and fixing galvanished chicken mesh wire on brick walls, openings including cost of nails, screws. |
| 39 | Providing and fixing Mild steel welded mesh of size 20x20mm wire dia not less than 1.6mm, including cost of red-oxide steel primer and welding charges including steel frame work. |
| 40 | Providing and fixing 3mm thick PVC sheets, of approved colour, shade, pattern on walls ceiling, doors etc. including cost of adhesive screws finished to be paid. |
| 41 | Providing and fixing 8mm thick glass sheets in shelves including cost of mild steel C.P brackets of requisite number complete job. |
| 42 | Providing and fixing 5mm thick glass sheets in shelves including cost of mild steel C.P brackets of requisite number complete job. |
| 43 | Providing and fixing mild steel powder coated telescopic drawer channel, 200mm long of standard make including cost of screws, nails and removing of old damaged if required. |
| 44 | Providing and fixing mild steel powder coated telescopic drawer channel, 300mm long of standard make including cost of screws, nails and removing of old damaged if required. |
| 45 | Providing and fixing mild steel powder coated telescopic drawer channel, 450mm long of standard make including cost of screws, nails and removing of old damaged if required. |
| 46 | Brick work with machine moulded brick of class designation 12.5 conforming to IS 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide, 12mm deep complete in cement mortar 1:6 mix including wooden beading and corriage of material involved complete. |
| 47 | Hire Charges for excavator/loader /JCB including cost of fuel, operator complete job. |
| 48 | Engagement of Welder including hire charges of welding machine, electrodes, electric charges, hire charges of machine complete job. |
| 49 | Providing and fixing anti-skid/sand blasted Kota stone 18-20mm thick, laid over 20mm thick cement mortar in 1:3 mix cement mortar including cost of neat cement slurry and joints grouted with cement with matching pigment. |
| 50 | Providing and fixing of colour coated galvanized iron tile profile/Ribbed colour coated iron sheets in roofing 0.50mm thick fixed with J/L hooks or screws etc complete. |
| 51 | Providing and fixing of colour coated iron sheets for rain water gutters of thickness not less than 0.50mm width 150mm depth 100mm minimum at any height fixed with iron brackets, bolts, nuts and washers etc. including making necessary connection with rain water pipe complete. |
| 52 | Providing and fixing of self adhesive PVC frosted/Touslusent glassfilms of thickness 120-140 microns of approved design pattern and colour including preparation of surface free of synthetic enamel greese, dirt etc. (finished area to be measured). |
| 53 | Providing and fixing of PVC flexible banners of different sizes with computerized digital printing including fixing the same with necessary framing of M.S hollw sections complete job. |
| 54 | Regrinding, repolishing terrazo flooring/kota stone flooring to granulithic finish including cost of rubbing stones polishing material, hire charges of electric grinding machine including electricity charges |
| 55 | Providing/fixing ceremonial-satin cloth flag with stitching and fixing arrangements. High quality satin fabric fast colourof size 3'-0\\" x 2'-0\\" of any pattern, including mounting on mild steel poles excluding cost of poles. |
| 56 | Providing and fixing aluminium sheets in partition ceilin, flooring of requisite thickness incl. cost of fixing accessories. |
| 57 | Dry random rubble masonry with hard stone from quarry including bond stone and carriage of same from approved source upto site of work, complete |
| 58 | Supply and filling of RBM of specified size as approved including dressing, watering, ramming including carriage of same from approved source upto site of workcomplete. |
| 59 | Providing and fixing of superior quality wall paper of approved brand, manufacture, color and design with necessary adhesive Gum powder fully chemicalised or favicol whichever is suitable including prepration of wall surface by way of sand papering, applying of POP/wall putty and other necessary repair , all complete at all heights as per specifications, drawings and as directed by Engineer In-charge etc. |
| 60 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading |
| 61 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Budloo/ Fir wood 50x12mm |
| 62 | Budloo/ Fir wood 50 x 20 mm |
| 63 | Providing and fixing of Kitchen cabinets / Amirah made of 19 mm thick ply wood in sides, shelves and front shutters and back with 6mm thick ply wood including lining of front shutters with sun-mica/ denmica or teak wood mirror polished along with fixing of mica inside completely as per approved drawings and color inside including all Brass hardware fittings,glazing and drawer telescopic channels etc. wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinet will be measured for payment)600 mm |
| 64 | 450 mm |
| 65 | 300 mm |
| 66 | Providing and fixing of plywood( BWR) in walls , ceiling or like of approved brand and manfacture with all necessary fittings and fixtures, scaflolding all complete as per the directions of incharge eengineer at site6 mm thick |
| 67 | 10 mm thick |
| 68 | 12 mm thick |
| 69 | 19 mm thick |
| 70 | Providing and fixing of denmica / sunmica over old almirah including all complete as per the directions of incharge engineer at site |
| 71 | Providing and fixing of imported wooden panelling(12mm thick) lining on walls, ceilings tongued and grooved planks including cost of ground work ofjambs/runners of kd or budloo 2\\"x1.5\\" @600mm c/c horizontally and vertically in level and plums 12mm thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete all complete |
| 72 | Providing and fixing of cornice 50 mm wide of omported kD wood with all necessary fittings and fixtures all complete |
| 73 | Designing, Fabricating,Testing, Installation and fixing of Aluminum Composite panels (ACP) of Alstone, Eurobond or Eq. in wall cladding, Ceiling (4 mm thick with 0.5 mm thick skin thickness) over and Including the frame work of Aluminum Sections of 16 guage of required length with necessary fittings like Screws, Dash Fastners, silcon and scaffloding etc all complete as per directions of incharge engineer at site. |
| 74 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia.G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat |
| 75 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protectiveguard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. |
| 76 | Providing and fixing of 0.5mm thick colour coated iron profile sheet roofing accessories in ridges, valleys etc (500 to 600 MM wide) of approved profile and colour as approved by Engineer-in-Charge with self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of ridges/valleys including carriage of same upto site of work complete. |
| 77 | Providing and fixing of 25mm thick T&G wooden planks of budloo / imported DD Woodwood including scafolding , all fixtures and all carriages complete |
| 78 | Providing and Fixing of Acrylic iluminted Signages 2D Board of rectangular Shape: ( size 15''x 7'') having Thickness of Board 3 mm with Vinyle Lettering including wooden frame box,saver lamp and wiring all necessary items by way of chiseling of plaster for fixing the same on gate piller.Complete.Providing and fixing Aluminium hardware fittings of approved make |
| 79 | Tower bolt 100mm |
| 80 | Tower bolt 150mm |
| 81 | Eye Hook |
| 82 | Handle100mm |
| 83 | Handle150mm |
| 84 | Ward robe lock concealed Godrej/Link/Ramson. |
| 85 | Hinges 75mm |
| 86 | P/F Mortice Locks for Doors Link / Godrej/ ramson |
| 87 | P/F DOOR Closure Capsule Type of approved make |
| 88 | P/F DOOR Closure Pump Type of approved make |
| 89 | P/F DOOR Closure Hydralic Type of approved make |
| 90 | P/F Almirah Locks with Screws Complete of approved makeand quality |
| 91 | Magnetic catchers |
| 92 | Sliding Door bolt 300mm long (Al-drop) Stainless steel withlock and key Link/Ramson. |
| 93 | Engagement of Masons, Electrician, Welder, Carpenter, Plumber and helpers along with equipment for various worksCarpentar |
| 94 | Electrician |
| 95 | Welder |
| 96 | Plumber |
| 97 | Mason |
| 98 | Labour / helper |
| 99 | Providing and fixing of P.V.C panelling of approved brand and manufacture to walls / ceiling incld cost of galvanized iron frame and bracings complete incld all labour / material complete incld cost of plugs, nuts, bolts etc frame , G.I frame spacing @600mm c/c on both sides |
| 100 | Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws,etc. in floors and treads including providing SS shoe at each balusters complete as per architectual drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects all inclusive excluding main bullatser posts |
| 101 | Providing and fixing of stainless steel (Grade 304) 1.6mm thick master bullester of required design complete for railing decorative type (75 mm). |
| 102 | Providing and fixing of 12 mm thick flooring of approved make over and incl. foam and side cornice complete incl. all carriage as per directions of Engineer Incharge at site complete. |
| 103 | P/applying of lime surkhi with part of cement on existing brick work with necessary grinding ,cutting getting out mortar as per specification ,including curing, scaffolding material involved for lime surkhi as per requirement or as directed by site incharge |
| 104 | P/F of 40 mm thick 300 mm wide eaves boarding of best quality kailwood,withmoulded edge as per specifications. |
| 105 | Providing and fixing wooden handrail for stair case of standard make and design as approved by consutant incld the cost of all fittings and fixtures complete job |
| 106 | Providing and fixing balustrades 200 for stair case of standard make and design as approved by consutant incld the cost of all fittings and fixtures complete job |
| 107 | P/ F of 1HP water motor including its fixing complete job |
| 108 | Washing of Kerb/devri stones with detergent and water including cleaning of grease and oil at spots with appropriate chemical complete job |
| 109 | Labour for fixing of Devri/kerb stone and fixing in 1:3 mix and (pointing h 1:2 mix including making drainage opening wherever required incl. all leads and lifts complete |
| 110 | P/L rough chisel dressed devri stone in kerbs,of size 200x200mm face with chamfer in cement mortar 1:3(1cement:3 sand)incl. pointing ,curing complete. |
| 111 | Clearance of footpath (manually) by way of removing grass, unwanted vegetation, dressing of footpaths including disposal of same beyond municipal limits |
| 112 | Clearance of Drains(manually) by excavating accumulated, deposited mulba, silt and cutting grass extra with disposal of excavated rubbish beyond Municipal Limits by Mechanical transport Handcart with T &P required to make the drains functional complete |
| 113 | Earth filling (free from pebbles, clods, vegetations and other foreign materials) carrying by MT laying in layers incl. dressing watering and consolidating with power road roller (8-10 ton) incl. cost & carriage of all materials, leads, lifts and carriages from approved source upto site of work complete(including royality) |
| 114 | Providing and fixing high intensity PVC Retroreflective tapes upto 5 mm thickness on poles (two or more shades of yellow, black, white and red)complete |
| 115 | P/L, watering and compacting with (8-10T capacity Power road roller) GSB/nallah muck /RBM/Khak bajri witj aggregate size not exceeding 150mm to specified lines, grades, cross sections, density, finished work to be measured incl. carriage of materials by mechanical transport from source of supply upto site of work also includes all leads, lifts, loading, unloading & stacking charges complete |
| 116 | Supply and Stacking of graded stone aggregate at site of size range 63-45mm, Grade IInd with stone screening/chipping 13.2mm nominal size type A stone dust at site including all carriage and laying water bound macadam with specified stone aggregate, stone screening and binding material including screening, sorting, spreading to template and consolidation with PRR with morrum including laying WBM to specifications including watering and 8 to 10 tonne capacity PRR complete. |
| 117 | Supply and Stacking of graded stone aggregate at site of size range 53-22.5mm, Grade IInd with stone screening/chipping 11.2mm nominal size type A stone dust at site including all carriage and laying water bound macadam with specified stone aggregate, stone screening and binding material including screening, sorting, spreading to template and consolidation with PRR with morrum including laying WBM to specifications including watering and 8 to 10 tonne capacity PRR complete. |
| 118 | Supply and erecting of precast reinforced cement concrete road divider as per apporved drawing and design duly painted with epoxy paint including priming coat (in unit of 2.0 to 2.5 mt of length of 1 mt hight with base width of 0.45 m and flange width of 0.15 mt in tapered form including transportion and placement at site by hydraulic crane as per requirements and management of traffice during placing (1x2.5 mt) of approved brand and manifacture. |
| 119 | PROVIDING AND FIXING OF M.S ANCHOR BOLTS 300MM IN LENGTH 16MM DIA WITH NUTS AND WASHER PLATES AS PER DIRECTION OF EIC AT SITE COMPLETE. |
| 120 | Providing and fixing 600x120x5mm glass shelf withedges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc, complete. |
| 121 | Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete |
| 122 | Providing and fixing of Gyser of approved make 50litre Capacity with all necessary fittings. |
| 123 | 25 Litres |
| 124 | Pruning of poplar trees by way of trimming of protruding branches using chainsaw, shears,,axes and ropes including chopping of trimmered branches stacking at the designated location incuding its clearance from site by mechanical transport so that trafiic will ply smoothly and disposal of the serviceable /unserviceable material with all leads, lifts, carriage complete in all respects complete job as perthe directions of Engineer Incharge. (Stacked material whether serviceable/unserviceable material shall be the property of the contractor) The girth shall be measured at a height of 1 mt from ground level.Beyond 120 cm girth upto 240 cm |
| 125 | Above 240 cm girth |
| 126 | Clearance of septic tank by way of Engagement of suckers for clearing, taking out all the slush, unhygienic material from the tanks and disposal of the same beyond Municipal limits complete job. |
| 127 | Providing and spreading of Salt during clearance of snow complete |
| 128 | Hire and running charges(The hire charges are on per day basis )Kehwa Zaffrani with almond slices (100ml) incl cost of disposal cup |
| 129 | Sheermal (Standard Size) |
| 130 | Bagirkhani (Serving Size for 1 Person) |
| 131 | Pandaal Waterproof crewel with curtains pillar less VIP (24' x 24') (The area can be rearranged as per site) |
| 132 | Pandaal Waterproof crewel with curtains VIP (24' x 24') (The area can be rearranged as per site) |
| 133 | Shamiyana waterproof whitehouse with Kanaths (30' x 30'=900 Sft) (The area can be rearranged as per site) |
| 134 | Shamiyana plain (30' x 30') (The area can be rearranged as per site) |
| 135 | Table (3' x 6') |
| 136 | Table (3' x 4') |
| 137 | Sofa sets of three pieces |
| 138 | Plastic chair |
| 139 | VIP Chair with white loose cover |
| 140 | Carpet (12' x 12') |
| 141 | Carpet Runner (4' x 30') |
| 142 | Excel Runner width upto 6 feet |
| 143 | Terpoline Polythene (12' X 15') |
| 144 | Supplying and Fixing in position Pre-coated Plastic/PVC Road humps/ road speed breakers/ speed bumps (model no. DA-1008) made of Carbon Black Mixed plastic with additive of LDPE for reinforcement and UV resistant coloring agent or pure epdm, dual coloured with 365mm width of each colour strip, glass elements and reflectors including anchoring to road surface with dash fasteners / bolts of required size and cost and carriage of all materials complete. (1000mmX365mmX50mm) |
| 145 | Providing and fixing of painted poly carbonate parking safety convex mirrors, 1200 mm dia. Of approved brand and manufacture including costof fittings and other necessary fixtures complete job. |
| 146 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete |
| 147 | Providing and fixing PVC flexible banners of different sizes withcomputerized digital printing including fixing the same with necessary framming of MS hollow sections incl. all cost, carriage and complete job. |
| 148 | Providing and Fixing of vertical blind curtains of any color / pattern of superior quality with GI Channel pelmet incl.manual opening and closing arrargement, nails, steel screws and all complete |
| 149 | Providing and fixing anti-bacterial / anti-skid vitrified floor tiles of size, thickness as per manufacturer’s specification, conforming to IS 15622, of approved make, colour and shade, laid on 20 mm thick cement mortar 1 : 4 (1 Cement : 4 Coarse Sand) bed or high polymer adhesive, including grouting the joints with white cement and matching pigment / epoxy grout, cleaning, curing, finishing, carriage of materials, wastage, protection of surface, and complete all as directed by the Engineer-in-Charge. |
| 150 | 600 x 600 mm |
| 151 | 600 x 1200 mm |
| 152 | 800 x 800 mm |
| 153 | “Providing and fixing of PVC vinyl sheet flooring of approved make and design, including anti-slip surface finish, over a properly prepared and leveled cement/screed/concrete substrate. The work includes cleaning and minor leveling of the substrate, supply of adhesive of approved brand for bonding, laying of PVC vinyl sheets, joint finishing, trimming at edges and corners, provision of skirting/edge trims, minor consumables, curing/settling of adhesive, and protection of finished flooring until handover. The rate includes carriage of materials to site, labour charges, consumables, and contractor’s overheads and profit. Flooring to be laid as per manufacturer’s instructions and Indian Standards.”1 mm thickness |
| 154 | 1.5 mm thickness |
| 155 | 2 mm thickness |
| 156 | 4 mm thickness |
| 157 | “Providing and applying acid‐wash treatment to existing corrugated galvanised iron (CGI) roofing sheets, including setting up access/ safety protection, removal of loose rust/scale, application of approved acid reagent diluted as per manufacturer recommendation, brushing and cleaning of sheet surface, neutralisation of acid, thorough water‐rinse, safe collection and disposal of effluent/ runoff, protection of adjacent surfaces and gutter/drainage systems, carriage and transport of chemicals and disposal bags, labour (skilled and helpers) for the entire operation, consumables (gloves, protective clothing, goggles, containment sheets) and disposal of waste, all complete as per manufacturer’s instructions and as directed by Engineer–in–Charge.” |
| 158 | “Providing chemical wash/cleaning of existing tile flooring of approved quality, including supply of chemical cleaner/de‐scaler, preparation of surface (sweeping, removal of loose debris), application of chemical reagent, monitoring reaction, thorough rinsing‐wash, neutralisation (if required), disposal of waste/residue, cleaning off residues, protection of adjacent surfaces/furniture during work, carriage of chemical & equipment to site, skilled and helper labour for cleaning operations, cleanup and final inspection, all complete as directed by Engineer‐in‐Charge.” |
| 159 | “Repairing of sofas by way of replacement of upholstery cloth on one sofa seat cushion of approved make and design (minimum 450‑525 gsm weight fabric), including removal and disposal of the existing cloth covering, cleaning of seat cushion/frame, supply of new cloth (with approx 10% wastage allowance), thread, binding/skirting trim, stitching and fixing of new covering including renewal of cushioning and addition of foam padding for improved comfort, stitching, finishing and refitting in position including cpst of all materials, tools and tackles, carriage of materials to site, skilled upholsterer labour, helper labour, protection of adjacent furniture/surroundings, covering of finished seat until hand‑over, and all incidentals required for proper completion of the job, all complete as per directions of Engineer‑in‑Charge.” |
| 160 | “Providing and fixing Aluminium Composite Panel (ACP) of 4.0mm thickness of approved make and finish, including aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge. incl Frame work |
| 161 | “Providing and fixing Aluminium Composite Panel (ACP) of 4.0mm thickness of approved make and finish, Excluding aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge. incl Frame work |
| 162 | “Providing and fixing Aluminium Composite Panel (ACP) of 3.0mm thickness of approved make and finish, including aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge. incl Frame work |
| 163 | “Providing and fixing Aluminium Composite Panel (ACP) of 3.0mm thickness of approved make and finish, Excluding aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge. incl Frame work |
| 164 | “Providing and fixing aluminium partition panel (APP) of 3.0mm thickness of approved make and finish, including aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge. incl frame work |
| 165 | “Providing and fixing aluminium partition panel (APP) of 3.0mm thickness of approved make and finish, but excluding aluminium/wooden framework (studs / channels) of approved size, panel sheets fixed both sides, all necessary fasteners, edge trims, neoprene gaskets/sealants, surface finishing, minor substrate / frame preparation, carriage of materials to site, skilled labour, helper labour, consumables, protection of finished work until hand‑over and all incidental works complete as per drawings and directions of Engineer‐in‐Charge.” |
| 166 | Providing and Fixing Brass sanitary fittings of approved quality of standard quality as approved by incharge engineerBall valve 15mm dia nominal bore |
| 167 | Ball valve 20mm dia nominal bore |
| 168 | Ball valve 25mm dia nominal bore |
| 169 | Gate Valve 32 mm dia. Nominal bore |
| 170 | Gate Valve 40 mm dia. Nominal bore |
| 171 | Ball Cock 15mm dia nominal bore |
| 172 | Tanky Nipple 15 mm dia. Nominal bore |
| 173 | Tanky Nipple 20 mm dia. Nominal bore |
| 174 | Tanky Nipple 25 mm dia. Nominal bore |
| 175 | Tanky Nipple 32 mm dia. Nominal bore |
| 176 | Providing andfixing 3 layer PP-R (Polypropylene Random copolymer) fittingsCoupler 20 mm dia. Nominal bore |
| 177 | Coupler 25 mm dia. Nominal bore |
| 178 | Coupler 32 mm dia. Nominal bore |
| 179 | Coupler 40 mm dia. Nominal bore |
| 180 | Elbow 900 20 mm dia. Nominal bore |
| 181 | Elbow 900 25 mm dia. Nominal bore |
| 182 | Elbow 900 32 mm dia. Nominal bore |
| 183 | Elbow 900 40 mm dia. Nominal bore |
| 184 | Equal Tee 20 mm dia. Nominal bore |
| 185 | Equal Tee 25 mm dia. Nominal bore |
| 186 | Equal Tee 32 mm dia. Nominal bore |
| 187 | Equal Tee 40 mm dia. Nominal bore |
| 188 | Plain Union 20 mm dia. Nominal bore |
| 189 | Plain Union 25 mm dia. Nominal bore |
| 190 | Plain Union 32 mm dia. Nominal bore |
| 191 | Plain Union 40 mm dia. Nominal bore |
| 192 | End Plug 20 mm dia. Nominal bore |
| 193 | End Plug 25 mm dia. Nominal bore |
| 194 | End Plug 32 mm dia. Nominal bore |
| 195 | Ball Valve 20 mm dia. Nominal bore |
| 196 | Ball Valve 25 mm dia. Nominal bore |
| 197 | Ball Valve 32 mm dia. Nominal bore |
| 198 | Ball Valve 40 mm dia. Nominal bore |
| 199 | Male Thread adapto 25x15mm dia. Nominal bore |
| 200 | Male Thread adapto 25x20mm dia. Nominal bore |
| 201 | Fe Male Thread adapto 32x20mm dia. Nominal bore |
| 202 | Male Thread Elbow 32x20mm dia. Nominal bore |
| 203 | Female Thread Tee 25x15mm dia. Nominal bore |
| 204 | Providing and Fixing of PVC Pipe (Type \\"B\\") of approved quality ( Prince/Finolex, Jinadal/Astral Make or equivalent as approved by incharge engineer ) in proper gradient in excavated trenches including jointing and refilling the excavated material and refurbishing complete including charges of excavation. |
| 205 | 150 mm Dia |
| 206 | 100 mm Dia |
| 207 | 75 mm Dia |
| 208 | 50 mm Dia |
| 209 | Providing and Fixing PVC fittings (Type ''B'') of approved quality |
| 210 | Plain Bend 75 mm dia |
| 211 | Plain Bend 100 mm dia |
| 212 | Door Bend 75 mm dia |
| 213 | Door Bend 100 mm dia |
| 214 | Plain Tee 75 mm dia |
| 215 | Plain Tee 100 mm dia |
| 216 | Plain Equal Junction 75 mm dia |
| 217 | Plain Equal Junction 100 mm dia |
| 218 | Door Tee 75 mm dia |
| 219 | Door Tee 100 mm dia |
| 220 | Collar 75 mm dia |
| 221 | Collar 100 mm dia |
| 222 | Floor Trap 75 mm dia |
| 223 | Floor Trap 100 mm dia |
| 224 | P/S Trap 100 mm dia |
| 225 | off set 75 mm dia |
| 226 | off set 100 mm dia |
| 227 | labour |
| 228 | Providing and fixing C.P. brass elbow action Wall/Basin/Sink Mixer of approved make (Jaquar/Parko or equivalent), 15 mm nominal bore, double hole type, complete with C.P. cups, 15 mm C.P. extension nipples, rubber washers, coupling nuts, and all accessories, fixed in position, tested and commissioned, all complete as per direction of the Engineer-in-Charge. |
| 229 | Providing and fixing C.P. Brass hand sensor type Wall/Basin/Sink Mixer of approved make (Jaquar / Parko or equivalent), 15 mm nominal bore, double hole type, complete with C.P. cups, 15 mm C.P. extension nipples, rubber washers, coupling nuts and all accessories, fixed in position, tested and commissioned, all complete as per direction of the Engineer-in-Charge |
| 230 | Providing and fixing pair of C.P. brass legs for wall/sink/wash basin mixer standard size 15 mm nominal bore (20 × 15 mm thread connection), made of heavy quality solid brass body, duly chrome plated (C.P. finish), complete with wall flanges, rubber washers, nipples and all necessary fittings for proper connection of hot and cold water supply lines to the mixer body. The item includes fixing, alignment, jointing with approved sealing compound or PTFE tape, testing for leakage, and making good the wall surface where required, all as per manufacturer’s specification and direction of the Engineer-in-Charge. |
| 231 | Providing and fixing closed-cell elastomeric/polyethylene foam insulation (of required and adequate thickness) on G.I. pipes, complete with adhesive, sealing, and weather protection as per IS 9842 and Engineer-in-Charge’s direction. |
| 232 | Providing and fixing of heavy –duty PVC ball cock with 30 cm Aluminium rod and ball complete including removing of old damaged one wherever required.15 mm dia. |
| 233 | 20mm dia. |
| 234 | 25mm dia. |
| 235 | Providing and fixing flushing Kit complete in all respects in PVC flush Tanks (Compact one ) including replacing old damaged kit & making connection with water supply (Flushing kit of standard make). |
| 236 | Providing and fixing of C.P brass Waste for wash basins heavy duty of standard make. (32mm dia.) |
| 237 | Providing and fixing of C.P brass Waste for steel sink heavy duty of standard make. (40mm dia.) |
| 238 | Providing and fixing of C.P brass basin mixer Parko/jaquar make including old damaged one wherever required (heavy duty) including removing PVC connections. 15mm dia. |
| 239 | Providing and fixing of C.P brass Wall mixer Parko/Jaquar make including removing of old damaged one wherever required (heavy duty) with PVC connections. Double hole 15mm dia including cost of CP Cups and requisite CP nipple. |
| 240 | Providing and fixing of C.P brass sink mixer Parko or equivalent make including removing of old damaged one wherever required (heavy duty) C.P Nipples wherever required detachable including PVC connections. Double hole 15mm dia. |
| 241 | Providing and fixing of brass spindle (heavy type) for mixer, bib cocks & angle valves of standard make including removing of old damaged one. |
| 242 | Providing and fixing of PVC Tank lids with locking Arrangement complete in all respects to 1000litre/ 2000litre/5000litre capacity (overhead PVC tanks in attic floor). |
| 243 | Providing and fixing of Polyvinyl Chloride pipes (B-type) of standard make (ISI mark quality) for sewerage disposal system including fixing the pipe with clamps/stays or in trenches including excavation & refilling of trenches and jointing of pipes with Teflon tape and adhesive including dismentling of existing damaged pipes.( Work to be executed in foul conditions also wherever required). 50mm dia. |
| 244 | 75mm dia. |
| 245 | 100mm dia. |
| 246 | 150mm dia. |
| 247 | Providing and fixing of PVC fittings (B-type) of standard make (ISI mark quality) for sewrage disposal system with necessary washers /Teflon tape and adhesive including removing of old damaged fittings. A.) DOOR BENDS. 50 MM |
| 248 | 75 MM |
| 249 | 100 MM |
| 250 | 150 MM |
| 251 | B).FLOOR TRAP 75 MM |
| 252 | 100MM |
| 253 | C).PLAIN JUNCTION 75MM |
| 254 | 100 MM |
| 255 | 150 MM |
| 256 | D). REDUCER 75MMX50MM |
| 257 | 100MMX75MM |
| 258 | 100MMX150MM |
| 259 | E) . COWL. 75MM |
| 260 | 100MM |
| 261 | 150MM |
| 262 | F). P-TRAP 100MM |
| 263 | G).HOLDER/STAYES 50MM |
| 264 | 100MM |
| 265 | H) COLLAR 50MM |
| 266 | 100MM |
| 267 | 150MM |
| 268 | I)PVC PLAIN BEND50MM |
| 269 | 100MM |
| 270 | 150MM |
| 271 | J).PVC REDUCING JUNCTION 150X100MM |
| 272 | 100X75MM |
| 273 | K) OFF-SET 50MM |
| 274 | 100MM |
| 275 | Providing and fixing of C.P brass long bend ISI mark and of approved quality 32mm dia complete including removing of old existing damaged bend, repairs to floor (complete job). |
| 276 | Providing and fixing of brass ball valve of ISI mark heavy duty of the following nominal bore including removing of Old wherever required. Single turn. 32mm dia. |
| 277 | 40mm dia |
| 278 | 50mm dia |
| 279 | 75mm dia. |
| 280 | 100mm dia |
| 281 | Providing and fixing of G.I assorted fittings of following nominal bore/dia of ISI mark heavy quality including dismantling/removing of old/damaged fittings wherever necessary. 15mm dia. (a) Socket |
| 282 | (b) Elbow |
| 283 | (c) Tee |
| 284 | (d) Plug |
| 285 | (e) Tank Nipple |
| 286 | 20mm dia. (a) Socket |
| 287 | (b) Elbow |
| 288 | (c) Tee |
| 289 | (d) Plug |
| 290 | (e) Tank Nipple |
| 291 | 25mm dia. (a) Socket |
| 292 | (b) Elbow |
| 293 | (c) Tee |
| 294 | (d) Plug |
| 295 | (e) Tank Nipple |
| 296 | 32mm dia. (a) Socket |
| 297 | (b) Elbow |
| 298 | (c) Tee |
| 299 | (d) Tank Nipple |
| 300 | 40mm dia. (a) Socket |
| 301 | (b) Elbow |
| 302 | (c) Tee |
| 303 | (d) Tank Nipple |
| 304 | 50mm dia. (a) Socket |
| 305 | (b) Elbow |
| 306 | (c) Tee |
| 307 | (d) Tank Nipple |
| 308 | Providing and fixing of G.I Reducer of standard make. (a)20mmx15mm |
| 309 | (b) 25mmx15mm |
| 310 | (c) 20mmx32mm |
| 311 | (d)25mmx40mm |
| 312 | Providing and fixing of G.I Reducing Elbow of standard make. 20mmx15mm |
| 313 | (b) 25mmx15mm |
| 314 | (c) 20mmx32mm |
| 315 | (d)25mmx40mm |
| 316 | Providing and fixing of G.I Reducing Tee of standard make. 20mmx15mm |
| 317 | (b) 25mmx15mm |
| 318 | (c) 20mmx32mm |
| 319 | (d)25mmx40mm |
| 320 | Providing and fixing of C.P brass Nipple 15mm dia of required size ISI mark heavy duty(Male/Female type). 50mm long |
| 321 | 75mm long |
| 322 | 100mm long |
| 323 | 150mm long |
| 324 | Providing and fixing of C.P. brass towel rail of approved quality and ISI Make including cost of rawl plugs and screws etc. 450mm (20mm dia of rod). |
| 325 | 600mm (20mm dia of rod). |
| 326 | Providing and fixing of C.P. brass gratings heavy duty Including repairing of floor complete and dismantling old damaged gratings. 100mm dia. |
| 327 | Providing and fixing of C.P. brass (surgical) elbow action mixer 15 mm dia. with double hole (Parko or equivalent make). Sideways action. |
| 328 | Providing and fixing of C.P PVC health faucet Parko/jaquar make complete With bracket, holder & pipe 1.50metre long. |
| 329 | Providing and fixing of C.P brass health faucet Parko/jaquar make complete With bracket, holder & pipe 1.50metre long. |
| 330 | Providing and fixing of PVC Bib cock 15mm dia of standard make (Prince/Prayg) Complete Job. |
| 331 | Providing and fixing of M.S flanges of different dia’s including cost of M.S nuts, bolts, washers & welding complete job. |
| 332 | Providing and fixing foam insulation 8mm thick of standard make to G.I Water circulation/ distribution net work including wrapping of foam insulation with polythene sheets including cost of P VC adhesive Tap and binding wire complete job. 15 mm dia. |
| 333 | 20 mm dia. |
| 334 | 25 mm dia. |
| 335 | 32 mm dia. |
| 336 | 40 mm dia. |
| 337 | 50 mm dia. |
| 338 | Providing & fixing of M.S pipes of different dia. of standard make including laying in trenches, earth work on excavation refilling, welding (excluding cost of flanges, nuts & blots) complete job. |
| 339 | Providing and laying of dry stone soling of required size as per directions of site engineer from approved quarry in foundation on horizontal level incl .watering, ramming, loading, unloading and carriage of materials from source to site of work including cost of binding material complete job. |
| 340 | Opening repairing rewinding and reinstalation of 5HP Single hole water lifting pump with all necessary fixtures/fittings complete job. |
| 341 | Opening repairing rewinding and reinstalation of 2HP Single hole water lifting pump with all necessary fixtures/fittings complete job. |
| 342 | Opening repairing rewinding and reinstalation of 1HP Single hole water lifting pump with all necessary fixtures/fittings complete job. |
| 343 | Providing & fixing 25mm G.I Tee (equal). |
| 344 | Providing & fixing 25mm G.I Nipples for G.I pipe complete job. |
| 345 | Providing & fixing 25x20mm G.I Nipple reducer for G.I pipe complete job. |
| 346 | Providing, Installing and commissioning of 1HP phase mano block Motor pump set 2880RPM (3.7KW) with all necessary fittings & fixtures including testing and removal of old damaged one complete job. (Crompton make) in water supply pump house. |
| 347 | Providing & fixing stainless steel soap case including screws etc complete job. |
| 348 | Providing & fixing C.I Air release valve 50mm dia. double chamber weight not less than 8 Kgs. |
| 349 | Providing and fixing C.P brass 15mm nominal bore two way bib cock for receiving health faucet and other fittings. |
| 350 | Providing and fixing Kitchen sink 304 grade S.S Double bowl 36\\"x20\\"x9\\" square bowl including cost of C.P brass waste couping PVC waste pipe, angle iron brackets if required. |
| 351 | Providing and fixing C.P brass top for bib cock of any make/design to fit on existing fittings. |
| 352 | Providing and fixing PPR Fittings of approved make including cost of adhesive removing old one and refixing new one. 15mm Elbow. |
| 353 | Socket 15mm dia. |
| 354 | Equal Tee 90degree. |
| 355 | Male Adopter 15mm dia. |
| 356 | Female thread elbow 15mm dia. |
| 357 | Reducing Tee 15mmx20mm |
| 358 | Providing and fixing PPR External Ball Valve. 15mm dia. |
| 359 | Providing and fixing PPR External Ball Valve. 20mm dia. |
| 360 | Providing and fixing PPR External Ball Valve. 25mm dia. |
| 361 | Providing and fixing PPR External Ball Valve. 32mm dia. |
| 362 | Providing and fixing PPR External Ball Valve. 40mm dia. |
| 363 | Providing and fixing of PPR fittings Male/Female Reducer. 15mmx25mm. |
| 364 | 20mmx32mm |
| 365 | 25mmx40mm |
| 366 | 50mmx63mm |
| 367 | Providing/Installation of 1 HP Submersible dewatering pump including commissioning of the same with necessary fittings/fixtures with automatic sensor complete. |
| 368 | Providing/Installation of 2 HP Submersible dewatering pump including commissioning of the same with necessary fittings/fixtures with Automatic sensor complete. |
| 369 | Removing / Dismantelling / Re-Installing after repairs to 2 HP Submersible dewatering pump, including replacing / rewinding of coils if required and change of water level sensors. |
| 370 | Providing and fixing CP nipples(15x150mm) |
| 371 | Providing and fixing GI nipples (B-class), 15mm x 150 mm |
| 372 | Providing and fixing GI nipples (B-class), 20mm x 150 mm |
| 373 | Providing and fixing GI nipples (B-class), 25mm x 150 mm |
| 374 | Replacement and rewinding of core for 2HP submersible pump with copper wire (superenameled copper wire) conforming to IS-13730/IS-8783 including varnishing, baking balancing of rotor (if applicable ) including dismantling cleaning, reassembling and testing at site. |
| 375 | Replacement and rewinding of core for 5HP submersible pump with copper wire (superenameled copper wire) conforming to Is 13730/IS8783 including varnishing, baking balancing of rotor (if applicable ) including dismantling cleaning, reassembling and testing at site. |
| 376 | Supply, testing and commisioning of 5HP submersible vertical type pump suitable for continues duly/fully submersible motor rating 5HP-(3.7kw) three phase, fine h2 415VAC, 2800-2900rpm head 60m, discharge capacity 400 litre/minute, winding material cast (superenameled copper iwre ISI mark conforming to IS 13730) iron bod, pillars bronze, shaft steel mess, discharge size 50 mm, installation make KILSKOR, CROMPTON |
| 377 | Providing and fixing sensors for submersible vertical type pumpsa. 1HP/2HP/5HP/10HP |
| 378 | Labour charges for repairs of structural steel including hire charges of welding machine and cost of welding rods complete |
| 379 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm |
| 380 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 600x1200mm |
| 381 | Providing & fixing of vertical blind roller curtains of any colour/pattern of superior quality with G.I Channel pelmet including manual opening and closing arrangements, nails, steel screws all complete. |
| 382 | Providing and fixing steel sign board of various size of approved brand design, complete as per the direction of engineer in-charge |
| 383 | Providing and fixing ACP sign board of various size of approved brand design, complete as per the direction of engineer in-charge |
| 384 | Providing and fixingPVC ornamental 50mm Beading/Cornice for signboards etc complete as per the direction of engineer in-charge |
| 385 | Providing and fixing 18mm rubber wood paneling with necessary screws, nails and adhesive fixed on ply wood sheets / wooden frame work excluding cost of frame work but including cost of screws, nails including French sprit polish complete job as per direction of Engineer –incharge |
| 386 | Providing and fixing of MDF laminated flooring including the base cushion of foam sheet and fixed complete job. (8mm) |
| 387 | Providing and fixing of MDF laminated flooring including the base cushion of foam sheet and fixed complete job. (12mm) |
| 388 | Providng and fixing MDF Corner Beading 25x12mm compatible for Laminate wood / HDF / MDF Flooring |
| 389 | Providing and fixing Khatambandi ceiling with necessary screws, nails and adhesive fixed on ply wood sheets including cost of frame work, Plywood base, screws, nails complete job as per direction of Engineer –incharge |
| 390 | Hire Charges for mini truck |
| 391 | Driver for mini truck |
| 392 | Repairing of collapsible steel shutters including welding Complete |
| 393 | Providing Rectangular Cement Concrete pots of specified size, cast withcement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone aggregate 6 mm nominal size) reinforced with M.s wires of 3.5 mm diaas per design, including required form work finishing with cementpunning on exposed surface curing for specified period and stacking inrequired rows and height, including filling with good earth all complete as per direction of officer-in-charge. (900mm x 300mm top tapering downwards) |
| 394 | S/L of stone solling in trenches hand packed of size not more than100mm incl. consolidation with PRR 8 tonn capacity |
| 395 | S/L of coarse sand incl. sieving of sand properly to remove any foreign substance and laying in layers not exceeding 50mm in depth and surface to be flooded with water incl. carriage of sand from near source |
| 396 | S/L of sandy loom (mixture of fine sand and fine clay) in ratio 1:10 to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator |
| 397 | P/fixing 15x15 feet cricket canvas sight screen and is movable foldable with stable MS section frame with channel base with 4 SPecial turf tyres allowing easy movement with color black on one side of sight screen and white color on other side |
| 398 | Providing and laying Precast Cement Concrete interlock Tiles 75 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment.or under sand cushioing 50 mm thick as per requirement at site or as directed by engineer incharge. |
| 399 | P/fixing 15x15 feet cricket canvas sight screen and is movable foldable with stable MS section frame with channel base with 4 SPecial turf tyres allowing easy movement with color black on one side of sight screen and white color on other side Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender