Tender For Construction Of Mechanized Windrow Composting Unit At Fruit And Vegetable Market Aglar Shopian. (Design, Supply, Installation, Testing And Commissioning Of 05 Ton Per Day Capacity Mechanized Windrow Composting Unit At Fruit And Vegetable M
Tender Value
73.82 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
13 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mechanized Windrow Composting Unit At Fruit And Vegetable Market Aglar Shopian. (Design, Supply, Installation, Testing And Commissioning Of 05 Ton Per Day Capacity Mechanized Windrow Composting Unit At Fruit And Vegetable Market Aglar Shopian).Advertised Cost=₹73.82 Lacs (Amount Without Gst =62.56 Lacs And Gst Amount =11.26 Lacs )
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication, Providing and Fitting of Segregation Table fabricated out of SS-304 material for segregation of organic waste along with (2 No's) of HDPE Dustbins of 100 ltrs capacity each. |
| 2 | Supply, Installation, Testing and Commissioning of SS Feeding Conveyor with suitable feed receiving arrangement and discharge arrangement, complete in all respects. |
| 3 | Supply. Installation, Testing and Commissioning of Dewatering Machine with feeding Hooper and output chute and conveying mechanism as per requirement. |
| 4 | Supply. Installation, Testing and Commissioning of twin shaft shredder for wet waste with feeding Hooper and output chute and conveying mechanism as per requirement. |
| 5 | Supply, Installation, testing and Commissioning of Dry Waste double shaft Shredder Machine with feeding Hooper suitable for rice straw, cardboards, wooden boxes, coconut shells etc and output chute and conveying mechanism as per requirement. |
| 6 | Supply Installation, Testing and Commissioning of Compost Mixer Machine. |
| 7 | Supply, Installation, Testing and Commissioning of cabin based 60 HP tractor with exterior hydraulic mechanism & reverse PTO system. The tractor shall also be fitted with the front loader of suitable lifting capacity.(Four wheel drive) |
| 8 | Supply, Installation,Testing & commisioning of tractor driven Compost Turner with heavy duty frame structure with two/four tyre, fitted with water tank of capacity suitable for 05 Ton per day Mechanized windrow composting unit & 8-10 water sprays nozzles. (with working height 1500mm, working width not less than 2800) |
| 9 | Supply, Installation, Testing and Commissioning of 3 phase 440V 50-60 Hz Rotary Compost Screener (Total power not less than 7 Hp ) with feeding hooper,feeding conveyor and product conveyor. |
| 10 | Providing/Supply and Testing of portable bag sieving machine (Double Needle Double Thread) with minimum 3-5 bags per minute, including thread material rolls as per capacity. |
| 11 | Cost on account of water pump (1HP) along with 3000 ltrs capacity water tank including necessary fittings etc for cleaning the floor. |
| 12 | Supply, Installation, Testing and Commissioning of LT ModularControl Panel of appropriate size fabricated out of 14 SWG sheet having required openings/vents and protection Class : IP. 55 & fitted with accessories as under:A) Copper Bus bars (TPN): Quantity = 01 No.The bus bars shall be air insulated and made-up of high conductivity copper with current density of suitable rating for 200 Amperes. Suitable segregation shall he provided in between bus bar chamber and adjoining compartments. The bus bar shall be PVC sleeved with colour strips of red, yellow. blue and black and the same be arranged in accordance with IS: 375 specifications. Electrical clearances shall be maintained between phases, neutral and body as per standardsB)160- 200A Main MCCB (Breaking Capacity 36kA): Quantity = 01 No.C) 160A Change over Switch: Quantity = 01No.D) MCB 32A - 3Pole C-Type (Breaking Capacity 15kA):Quantity = 05 Nos.E) MCB 16A - 3Pole C-Type (Breaking Capacity 15kA):Quantity = 02 Nos.F) MCB 16A - 2Pole B-Type (Breaking Capacity 15kA): Quantity = 03 Nos. (for lighting).G) MCB 32A - 2Pole B-Type (Breaking Capacity 15kA):Quantity = 01 Nos.(for Heating).The panel shall be provided and fitted with phase indicators, digital Multi Function meter of sultable range, phase selector switches. Suitable rating CT coils, Internal wiring, tapping, thimbles etc complete in all respects. All panel compartments shall be provided with suitable cable alley, bus bar alley, separate cubicles for Motor Back-up Protection MCCB's. The enclosure of the panel shall be of excellent fit and finish, corrosion resistant and powder coated, gliding hinges for smooth and noiseless movement of windows and advanced locking arrangements and proper stand. |
| 13 | Supply, installation, testing & commissioning of 60 KVA servo-stabilizers including all allied electrical acessories The stabiliser should have following specifications:a) Capacity:60-KVA, 3-phase unbalanced typeb) Input: (110-290)-V-AC P-N; (190 - 450) V AC P-Pc) Output: 415 V 1% - phase to phased) Supply: 3 phase, 4 wires, 50Hze) Operation: Automaticf) Duty cycle: Continuous9) Transformer windings: Copper wound on CRGO laminations as per IS specificationsh) Cooling: Oil cooled(Transformer Oil Not less than 400L included)i) Efficiency: Better than 98% at full loadj) Overload capacity: 15% for continuous 4 hoursk) Waveform distortions: Nill) High speed voltage correction: up to 8V to 20V per secondm) Protections: Under voltage, Over voltage and Overload with time delayn) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement. The Job also includes P/F of 125 Amp 4 Pole MCCB as incomer to the Servo Stablizer to be provided in CRC-Enclosure. |
| 14 | Providing and Fitting of 95 sqmm, 3.5 core LT 1.1 KV, PVC Insulated, Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control panel and the job also includes cost on account of providing and fitting of reputed make and rating thimbles for interconnecting of HT transformer, Servo. LT Control panel with proper cripping and tapping after using proper crimping tool. The job shall include providing and fitting of proper anchoring to LT cable from HT/LT substation to control panel/servo etc. |
| 15 | Supplying and Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, part II complete with fitting and cutting jointing etc. direct in ground (75cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. (TO BE PAID AS PER ACTUAL)63mm dia (OD-63mm & ID-51mm nominal) |
| 16 | Providing and Fitting of 6 sqmm, single core LT 1.1 KV, copper Conductor HRFR PVC insulated industrial cable from Control Panel to individual machines/motors with other accessories of suitable rating to be laid underground or in conduits of suitable size as per requirement. |
| 17 | Operation and maintainence of machines for two working seasons(the season is of six months of two consecutive years). The cost involves engaging of one skilled operator along with one number helper for the operation of machines during working seasons. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender