Tender For Execution Of Civil Work Under Construction Of Chain Link Fencing Over repair renovation Stone Masonry Dwarf Wall Around The North And East Sides Of Monument, And Upgradation Of Toilet Blocks At Parihaspora, Pattan Baramulla
Tender Value
86.82 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
16 days left
EMD
2.17 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Civil Work Under Construction Of Chain Link Fencing Over repair renovation Stone Masonry Dwarf Wall Around The North And East Sides Of Monument, And Upgradation Of Toilet Blocks At Parihaspora, Pattan Baramulla
BOQ
| Sl. No. | Item Description |
| 1 | Sub heading 1 |
| 2 | Dismantling of old damaged Barbed Wire fencing over Surface including sorting of serviceable material within 300 mts |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 4 | Providing & laying of Cement concrete in combination mortar 1:3: 6 ( 1 Cement : 3 Course sand : 6 stone aggregate 20 mm & down gauge in foundation to give the strength to the retaining wall as well as dwarf wall including curing complete. |
| 5 | Providing and fixing of R.R stone masonry in foundations, plinth & above with 100% New in cement mortar 1:6 (1cement 6 Sand) and curing complete |
| 6 | Providing and Laying of 50 mm thick DPC / cement concrete coping over R. R stone Masonry in combination mortar 1:2:4 (1 Cement 2 sand 4 stone agg.) and curing complete. |
| 7 | Providing & fixing of chain link fencing 1.60 mt of height 5cm spacing of galvanized iron wire supported by angle iron 50 x 50 x 6 mm of 1.90 m long and 2m apart from c/c with mild steel flat 50 x 6 mm for fixing of chain link with angle iron posts embedded in cement concrete 1:2:4(1 cement, 2 sand, 4 st agg) 20mm down gauge every seventh panel to be supported with a diagonal fitted with nut and bolts complete. |
| 8 | Providing and applying 15 mm thick cement plaster on top of the dwarf wall in cement mortar 1:4 (1cement, 4sand) and curing complete |
| 9 | Providing and applying pointing on stone work of dwarf wall in cement mortar 1: 6 (1 cement,6 sand ) and curing complete |
| 10 | Providing and applying ready mixed enamel paint on iron based surface after coat of steel primer and papering etc complete |
| 11 | Providing and supplying , filling spreading & levelling stone boulders of size range 5cm to 20 cm, in the required thickness for all leads & lifts , all complete |
| 12 | Providing and fixing of Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 13 | Providing and applying 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Providing and fixing of semi fine chisel dressed devri stone veneering of 25mm thickness of standard size in 1:4 cement mortar on external surfaces and curing complete. |
| 16 | Providing and fixing of wooden frames in doors wrought framed and Placed in position complete in 1st class kail wood |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge: 35mm thickness, including butt hinges (100 mm), metallic handle (150 mm), tower bolt (150 mm), steel screws, steel door bolts with lock (150 mm) |
| 18 | Provision for providing of Wood work in truss (budloo wood) in truss as per the design and drawing with necessary fixtures complete as per direction of site incharge and officers. |
| 19 | Providing and fixing of budloo wood panelling / ceiling in internal and outer front weather boardings / chajja of 20mm thickness approx. over frame batten work complete. |
| 20 | Providing and fixing plained eaves boarding of 2nd class deodar wood of size 250 x 32 mm |
| 21 | Providing and fixing of color coated hi rib GI sheet in roofing with necessary nails, washers, ridge of matching colour, rain gutter (600 mm over all girth), all complete |
| 22 | Providing and fixing of water cooler system (Blue star) model SDLX 50 lit purification capacity 80 liter/hour including all accessories i.e. water purifier Kent Model Elite mineral water purifier system with RO+UF+TDS technology 50 lit purification per hour. as per requirement and complete including fixing of G.I fitting CI fittings of approved brand and manufacture Proper waste water out let connections and including fixing of water storage tanks 2 nos. of 500 lit capacity double layer of approved brand and manufacture and pressure motor of approved brand and water pump 1 HP Crompton or kirloskar complete (list enclosed) |
| 23 | Provision for providing of Electricity fitting will all accessories including fitting charges for drinking water unit and washroom complete. (List enclosed) |
| 24 | Providing and laying of 100mm thick slab stone flooring of particular shape and size to match with existing pattern with 100 % new stone flooring to be purchased in cement mortar 1:6 (1 cement 6 fine sand) including curing complete |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-inCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 27 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note: -Butt hinges and necessary screws shall be paid separately): 35mm thickness |
| 30 | Providing and carrying out surface preparation by scraping old lime wash/paint wherever required, applying white cement based wall putty (1 mm average thickness) on interior plastered walls, applying primer, and finishing with two coats of acrylic plastic emulsion paint on interior walls and two or more coats of exterior acrylic emulsion paint with primer on exterior plastered surfaces, complete as per CPWD DSR and as directed by Engineer-in-Charge. |
| 31 | Providing and fixing 12 mm thick toughened laminated safety glass complete with structural silicone, EPDM gaskets, SS fittings and all accessories, complete in all respect |
| 32 | Providing and applying one coat of exterior wall primer followed by two or more coats of acrylic smooth exterior paint of approved brand and manufacture on new plastered exterior surface, complete as per CPWD DSR and as directed by the Engineer-in-Charge. |
| 33 | Repairs to existing wooden roof members including replacement of decayed/damaged wooden planks, tightening of joints, refixing loose members, filling cracks, fixing screws, nails, clamps and all incidental works complete |
| 34 | Preparation and finishing of existing wooden surface with scraping, sanding, wood preservative, wood stain (for colour change) and two coats of superior spar varnish, complete. |
| 35 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. |
| 36 | Providing and filling filter media in soak pit with graded stone boulders (5 cm to 20 cm), gravel (5 mm to 10 mm) and coarse sand (1.5 mm to 2 mm) in layers, including supplying, filling, spreading and dressing complete as per Engineer-in-Charge. |
| 37 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design |
| 38 | Provision for fixing supplying installing testing & commissioning of complete public toilet unit with all sanitary fixtures and all allied works complete in all respects. (List enclosed) |
| 39 | Provision for clearance of unserviceable material after the execution of work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender