Tender For Purchase Of Handpumps Set, Spare Parts Tools For Repair & Maintenance Of Hand Pumps Year 2026-27
Tender Value
1.45 Crore
Estimated cost
Bid Submission
10 Sep 2026
11 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Purchase Of Handpumps Set, Spare Parts Tools For Repair & Maintenance Of Hand Pumps Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Description of Items |
| 2 | 32mm Nominal bore hot dipped galvanised screwed and seiected pipe in 3.00 mt length with tolerance of + 0 to (-) 25mm. Confirming to IS 1239 (Part I) 1990 Meddium Class The socket shall be manufactured from seamless pipe or machined from solid bar Confirming to grade Fe 410 - S of IS 226/1975 with a dimensions (length & Diameter) specified in IS 1239 (partll) 1982 and shall be hot dipped galvanised. One end of the riser pipe shall be fitted with hot dipped galvanised coupler and the other with thread protector. pipe supplied shoud have IS 1239 mark embossed on it. tolerance on thickness and mass galvanising, leak lightness test, bend test on tubes, chemical composition, dimensions, bend test, sampling criteria for conformity marking, protecting and packing and all other details should be followed as per IS:1239 (Note : 3 mt length of pipe willl be measured without socket) Wt per pipe should not be less than 8.5 kg per piece. |
| 3 | Upper valve for deep well IM II hand pump as per IS 15500(Part II) /2004. |
| 4 | Check valve for deep well IM II hand pump as per IS 15500(Part II) /2004 |
| 5 | Water tank for deep well IM II hand pump as per IS 15500(Part II) /2004 |
| 6 | Telescopic Stand for deep well IM II hand pump as per IS 15500(Part II) /2004 |
| 7 | Sealing ring for deep well IM II hand pump as per 15500(Part II) /2004 |
| 8 | cylinder assembly (complete unit inclusive of stainless steel plunger rod 12 mm dia with NITRILE rubber pump bucket) with upper valve assembly, lower valve assembly suitable for IM II hand pump as per IS 15500 (part II) /2004 |
| 9 | upper valve assembly with (2nos nitrile rubber) pump bucket ,& comprising of plunger yoke body, upper valve, rubber seating, spacer & follower suitable for IM II hand pump as per IS 15500 (part II) 2004 |
| 10 | Lower valve assembly with rubber seat retainer, rubber seating, check valve & check valve seat for deep well hand pump IM II as per IS 15500 (part II) 2004 |
| 11 | Pump bucket ( nitrile rubber) for deep well hand pump IM II / III as per IS 15500 (part II) 2004 |
| 12 | Hex bolt M 12 x 40 with nut M 12 as per IS1363/1984 |
| 13 | Front cover for DW IM II HP as per IS 15500(Part II) /2004 |
| 14 | Head for DW IM II HP as per IS 15500(Part II) /2004 |
| 15 | Third plate for DW IM II HP as per IS 15500(Part II) /2004 |
| 16 | Chain with coupling for DW IM II HP as per IS 15500(Part II) /2004 |
| 17 | Handle for DW IM II HP as per IS 15500(Part II) /2004 |
| 18 | Connecting rod 12 mm dia & 3 mtr for DW IM II HP as per IS 15500 ( part II) /2004 |
| 19 | Rubber seating for upper valve for DW IM II HP as per IS 15500(Part II) /2004 |
| 20 | Rubber seating for lower valve for DW IM II HP as per IS 15500(Part II) /2004 |
| 21 | Handle axle (stainless steel) with washer and nut for deep well IM II hand pump as per IS 15500(Part II) /2004 |
| 22 | Reducer cap for cylinder of DW IM II HP as per IS 15500(Part II) /2004 |
| 23 | Socket 32 mm for riser pipe for DW IM II HP as per IS 1239(Part II) /1992 |
| 24 | Rod socket 12mm for connecting rod for DW IM II HP as per IS 15500(Part II) /2004 |
| 25 | Cylinder body with brass liner deep well IM II hand pump as per IS 15500(Part II) /2004 |
| 26 | Plunger rod for deep well hand pump IS 9301/1990 |
| 27 | Chain high tensile bolt M 10 x 15 x 40 with nyloc nut IS1365(Part II) |
| 28 | Hex-M 12 nut |
| 29 | Button die with holder m12 x 1-75 as as per IS 15500 (part II) 2004 |
| 30 | Heavy duty pipe wrench 600 mm (Taparia make) |
| 31 | Heavy duty pipe wrench 450 mm (Taparia make) |
| 32 | Connecting rod combination vice T-IM II-08 |
| 33 | Hack saw frame (300 mm) |
| 34 | Heavy duty 32mm NB pipe Vice as per IS 15500 (part II) 2004 |
| 35 | Heavy duty lifter spanner for 32 mm pipe as per IS 15500 (part II) 2004 |
| 36 | Crank spanner 17 x 19 as per IS 15500 (part II) 2004 |
| 37 | Bearing (No.6204zz- Prepacked with lithium base grease and seated on both sides) SKF make |
| 38 | Handle spacer |
| 39 | Bolt for front cover m 12 x 1.75 x 20 mm long |
| 40 | ISI Marked deep well hand pump IM-II complete with accessories and with 12 nos. of connecting rod made of bright bar electro galvanized, fitted with coupler with telescoic stand assembly, Pump Head assembly, cylinder etc. recommended for use in borewells having 150 mm casing pipe as per BIS9301-1990) along with ISI G. I. pipe with one side coupler (Pls refer GI pipe specification given below) - 12nos complete H. P. Set) |
| 41 | Heavy duty pipe wrench 12 inch (Taparia make) |
| 42 | Water tank extension 1.5 feet height (450mm) |
| 43 | Brass sleeve heavy class - isi Standard |
| 44 | Connecting rod lifter |
| 45 | Cutting plier pakkad (Taparia make) |
| 46 | Button die with holder for 32 mm G. I. pipe as as per IS 15500 (part II) 2004 |
| 47 | Ball pan hammar with handle (1 kg Approx) |
| 48 | Heavy duty pipe wrench 900 mm (Taparia make) |
| 49 | India Marked-II Extra deepwell handpump IM-II complete with accessories and with 16 nos. of connecting rod made of bright bar electro galvanized, fitted with coupler with telescoic stand assembly, Pump Head assembly, cylinder etc. recommended for use in borewells having 150 mm casing pipe as per BIS9301-1990) along with ISI G. I. pipe 16 nos complete H. P. Setwith one side coupler (Pls refer GI pipe specification given below) |
| 50 | India Marked-II Extra deepwell handpump IM-II complete with accessories and with 18 nos. of connecting rod made of bright bar electro galvanized, fitted with coupler with telescoic stand assembly, Pump Head assembly, cylinder etc. recommended for use in borewells having 150 mm casing pipe as per BIS9301-1990) along with ISI G. I. pipe 18 nos complete H. P. Setwith one side coupler (Pls refer GI pipe specification given below) |
| 51 | Water tank extension 1 feet height (300mm) |
| 52 | Water tank extension 2 feet height (600) |
| 53 | Cylinder Assembly for.Extra Deepwell Handpump Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender