Tender For Remaining Work Of Construction Of R And Lift Work At Cath Lab, Mgm Medical College, Jamshedpur In East Singhbhum District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Sep 2026
11 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Work Of Construction Of R And Lift Work At Cath Lab, Mgm Medical College, Jamshedpur In East Singhbhum District
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced cement concrete work in beam,suspended floors,roofs having slope uop to 15 digree landing ,balconies ,shelves,chajjas,lintes,bands,plain window sill,stair cases and spifral nstair cases above plinth level up to floor five level,exculiding the cost of centering,shuttering,finishing and reinforcement,with lintel 1:1.5:3 (1 cement: 1.5 coarse sand (zone III):3 graded stone aggregate 20 mm nominal size) |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges |
| 3 | Providing tor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL) |
| 4 | TOR 8 MMDIA. @ 50% of total steel qty. |
| 5 | TOR 10 MMDIA. @ 50% of total steel qty. |
| 6 | Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge |
| 7 | Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I |
| 8 | Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I |
| 9 | Providing 12 mm thick water proof CEMENT PLASTER (1:6) on outside wall with clean coarse sand of F.M.1.5 and waterproofing compound (as per specified and approved) including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 11 | FLOORING WORKS |
| 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 13 | Dark shade pigment using ordinary cement |
| 14 | Providing & laying 15 mm to 23 mm thick KOTAH STONE SLAB FLOORING and skirting of approved size, texture and colour over 19 mm thick base of line mortar (1:1:1) Lime putty: Surkhi: Coarse sand) laid over and jointed with grey cement slurry mixed with pigment ot match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | WATER PROOFING TREATMENT |
| 16 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations. |
| 17 | Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment. |
| 18 | Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs |
| 19 | After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645. |
| 20 | Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietary water proofing compund conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300X300 mm square. |
| 21 | The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I. |
| 22 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (WORKS TO BE DONE BY REGISTERED APPLICATOR OF PIDILITE/ SIKA/ ROFF WITH 10 YRS. GUARANTEE.) |
| 23 | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 24 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete. |
| 26 | MISCELLANEOUS WORK |
| 27 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.) |
| 28 | CARRAIGE OF MATERIALS |
| 29 | A) SAND |
| 30 | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 31 | B) STONE CHIPS |
| 32 | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| 33 | C) BRICKS |
| 34 | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 35 | ELECTRICAL WORKS FOR LIFT |
| 36 | ANNEXURE-(A )WIRING. |
| 37 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box etc. as required. |
| 38 | Supplying and drawing following sizes of PVC insulated copper conductor , single core cable in the existing surface / recessed PVC conduit including dismantling as required. |
| 39 | 2x1.5 sq mm |
| 40 | 3x1.5 sq mm |
| 41 | 4x6 sq mm |
| 42 | 4x10 sq mm + 2*6SQMM |
| 43 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor ,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried . |
| 44 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. |
| 45 | 2X2.5 sq mm +1 x 2.5sq mm earth wire .( For Light circuit) |
| 46 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps moduler socket outlet and 5/6 amps moduler switch , connection painting etc.as reqd. |
| 47 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps moduler socket outlet and 15/16 amps moduler switch , connection painting etc.as reqd. |
| 48 | Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . |
| 49 | 20 mm PVC coduit. |
| 50 | 25 mm PVC coduit. |
| 51 | Suppling and fixing following moduler type switch / socket on the existing switch box / cover including connection etc. as reqd. |
| 52 | 5/6 amps one way switch |
| 53 | 5/6 amps socket |
| 54 | ITC of fluorescent fitting directly on surface. |
| 55 | ANNEXURE-(B) MCB's and DB's. |
| 56 | Supplying and fixing of following way three pole & neutral, sheet steel , MCB distribution board 415 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) |
| 57 | 4way TPN(4+12), double door. |
| 58 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . |
| 59 | 6/32A Single pole |
| 60 | 6/32 A TPN |
| 61 | ANNEXURE-(C) EARTHING. |
| 62 | Earthing with copper earth plate 600*600*3 mm thick including accessories and providing masonary inclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as reqd. |
| 63 | Suppying & laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electode including soldering etc .as reqd. |
| 64 | S.I.T.C of following rating surfface mounted LED tube light fitting suitabe for 230v 50Hz single phase supply etc complete as required |
| 65 | 20/22w LED tube light |
| 66 | Non Schedule |
| 67 | Providing and Installing, Testing & Commissioning of 8 Passenger automatic (machine room less) Lift , including one year free maintenance which will be start from handing over the lift, all taxes and all complete as per following detail specifications. |
| 68 | PRODUCT- DETAIL- OTIS GeN2-Nova_MRL-1MPS/ Schindler 3000/ Johnson Nextra/ Equivalent |
| 69 | CAPACITY(Kgs) - 544 kg 8 persons. |
| 70 | SPEED(mps) - 1mps. |
| 71 | STOPS - 4 Stops with (all opening on the same side) |
| 72 | CONTROLLER TYPE - ACD5-MRL |
| 73 | DRIVE - VF Regenerative (Closed Loop) |
| 74 | POWER SUPPLY - 400/415 Volts (3 phase AC) |
| 75 | OPERATION - Full collective operation. |
| 76 | CAR GROUP - One car (simplex) |
| 77 | MACHINE - PM Gearless (Located in shaft on top of guide rails) |
| 78 | TRACTION MEDIA - Flat Coated Steel Belt. |
| 79 | CAR FINISH - |
| 80 | Rear Mid Panel= Stainless Steel # 4 (Hairline) |
| 81 | Rear Corner Panel= Stainless Steel # 4 (Hairline) |
| 82 | Side Panel= Stainless Steel # 4 (Hairline) |
| 83 | Front Panel= Stainless Steel # 4 (Hairline) |
| 84 | FALSE CEILING TYPE - CD-41 |
| 85 | FALSE CEILING FINISH - Stainless Steel # 4 (Hairline) |
| 86 | VENTILLATION - Cross flow fan. |
| 87 | HAND RAILS - Stainless Steel Mirror Finish Handrails on rear car panels |
| 88 | FLOORING - Vinyl Tiles |
| 89 | CAR DOOR FINISH - Stainless Steel # 4 (Hairline) |
| 90 | LANDING DOOR FINISH - Stainless Steel # 4 (Hairline) |
| 91 | FIRE RATED DOORS - Fire rating-60mins |
| 92 | CAR & HOISTWAY DOOR TYPE- Telescopic 2 speed doors |
| 93 | DOOR OPENING (W x H- MM )- 800 mm W x 2000 mm H |
| 94 | DOOR OPERATOR- DC Door Operator |
| 95 | COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline) |
| 96 | CAR POSITION INDICATOR- Monochrome LCD-Blue Background & White font Dot matrix (LED) Scrolling Display |
| 97 | HALL FIXTURES- O2000 Pan Type Fixture , |
| 98 | HALL FIXTURES FACE PLATE- Stainless Steel #4(Hairline) |
| 99 | HALL BUTTON ARRANGEMENT- LCD Monochrome type |
| 100 | STANDARD FEATURES- Anti-nuisance Car Call ProtectionIndependent Service (for Duplex only)Overload DeviceNudgingEmergency Car Light UnitInfrared Curtain Door ProtectionDoor Time ProtectionEmergency Alarm ButtonExtra Door Time of Lobby & ParkingDoor Open/Close ButtonManual Rescue OperationBelt Inspection DriveAuto Fan Cut Off |
| 101 | OPTIONS INCLUDED- Grounding Switch, Automatic Rescue operation, Voice Synthesizer, Audible Car Call Button, Emergency Power Operation, Parking Key Switch , |
| 102 | Providing and Installing, Testing & Commissioning of 15 Passenger automatic (machine room less) Lift , including one year free maintenance which will be start from handing over the lift, all taxes and all complete as per following detail specifications. |
| 103 | PRODUCT- DETAIL- OTIS GeN2-Nova_MRL-1MPS/ Schindler 3000/ Johnson Nextra/ Equivalent |
| 104 | CAPACITY(Kgs) - 1020 kg 15 persons. |
| 105 | SPEED(mps) - 1mps. |
| 106 | STOPS - 4 Stops with (all opening on the same side) |
| 107 | CONTROLLER TYPE - ACD5-MRL |
| 108 | DRIVE - VF Regenerative (Closed Loop) |
| 109 | POWER SUPPLY - 400/415 Volts (3 phase AC) |
| 110 | OPERATION - Full collective operation. |
| 111 | CAR GROUP - One car (simplex) |
| 112 | MACHINE - PM Gearless (Located in shaft on top of guide rails) |
| 113 | TRACTION MEDIA - Flat Coated Steel Belt. |
| 114 | CAR FINISH - |
| 115 | Rear Mid Panel= Stainless Steel # 4 (Hairline) |
| 116 | Rear Corner Panel= Stainless Steel # 4 (Hairline) |
| 117 | Side Panel= Stainless Steel # 4 (Hairline) |
| 118 | Front Panel= Stainless Steel # 4 (Hairline) |
| 119 | FALSE CEILING TYPE - CD-41 |
| 120 | FALSE CEILING FINISH - Stainless Steel # 4 (Hairline) |
| 121 | VENTILLATION - Cross flow fan. |
| 122 | HAND RAILS - Stainless Steel Mirror Finish Handrails on rear car panels |
| 123 | FLOORING - Vinyl Tiles |
| 124 | CAR DOOR FINISH - Stainless Steel # 4 (Hairline) |
| 125 | LANDING DOOR FINISH - Stainless Steel # 4 (Hairline) |
| 126 | FIRE RATED DOORS - Fire rating-60mins |
| 127 | HOISTWAY DIMENSIONS (W x D – mm) :1730 mm W x 2800 mm D |
| 128 | CAR DIMENSIONS (W x D x H - mm) :1000 mm W x 2400 mm D x 2200 mm H |
| 129 | CAR & HOISTWAY DOOR TYPE- Telescopic 2 speed doors |
| 130 | DOOR OPENING (W x H- MM )- 900 mm W x 2000 mm H |
| 131 | DOOR OPERATOR- DC Door Operator |
| 132 | COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline) |
| 133 | CAR POSITION INDICATOR- Monochrome LCD-Blue Background & White font Dot matrix (LED) Scrolling Display |
| 134 | HALL FIXTURES- O2000 Pan Type Fixture , |
| 135 | HALL FIXTURES FACE PLATE- Stainless Steel #4(Hairline) |
| 136 | HALL BUTTON ARRANGEMENT- LCD Monochrome type |
| 137 | STANDARD FEATURES- Anti-nuisance Car Call ProtectionIndependent Service (for Duplex only)Overload DeviceNudgingEmergency Car Light UnitInfrared Curtain Door ProtectionDoor Time ProtectionEmergency Alarm ButtonExtra Door Time of Lobby & ParkingDoor Open/Close ButtonManual Rescue OperationBelt Inspection DriveAuto Fan Cut Off |
| 138 | OPTIONS INCLUDED- Grounding Switch, Automatic Rescue operation, Voice Synthesizer, Audible Car Call Button, Emergency Power Operation, Parking Key Switch , |
| 139 | Add GST 18 % |
| 140 | Add Labour cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender