Tender For Repair To Certain Building With Allied Services At Alg Ziro Under Ge (Af) Tezpur
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
18 days left
EMD
19980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Building With Allied Services At Alg Ziro Under Ge (Af) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishes after dismantling of old floor tiles incluidng cement mortar bedding and rubbish off the Stn premises, complete all as specified and as directed. |
| 2 | Material and labour for coloured glazed ceramic tiles 450mm x 350 mmx 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) for fixing wall tiles after dismantling of old wall tiles including cement mortar bedding and rubbish off the Stn premises complete all as specified and as directed. Make: Kajaria, Somany, Orient and equivalent. |
| 3 | Material and labour for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in Skirting, Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 12 mm thick screed bed or bedding layer in CM (1:3) for lying floor finishes after dismantling of old floor tiles including cement mortar bedding and rubbish off the Stn premises, complete all as specified and as directed. |
| 4 | M&L for brick work with locally available best quality sub class \\"B\\" old size bricks straight or curved on plan exceeding 6m mean radius with old size bricks locally available built in cement mortar 1:6 as in Manhole etc complete including demolition of old brick work built in cement mortar, complete all as specified and as directed. |
| 5 | M&L rendering 15mm thick CM 1:6 externally on other than fair faces of brick work and finished the surface even and smooth without using extra cement and applying two coats cement base paint over a suitable primer after preparation of newely plastered wall or concrete surface, complete all as specified and as directed. |
| 6 | Material and Labour for anodised aluminium snap grid framework for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed. |
| 7 | M & L for 6mm thick Non asbestos fibre cement building boards fixed or laid/ nserted to timber/GI/Aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) complete all as specified and directed. |
| 8 | Material and labour for rendering 15mm thick externally on fair faces of brick work or concrete surface in cement mortar 1:4 and finished the surface even and smooth without using extra cement mixed with and including water oroofing compound @ 2% on top layer of 5mm thick complete all as specified including taking down cement plaster, any description on bricks or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 9 | Materials and labour for rendering 10 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of oil bound distemper over 1mm thick wall care putty, complete all as specified and directed. |
| 10 | Materials and labour for, rendering 10 mm thick cement plaster in cement mortar (1:4), in patches not exc.3.0 Sqm in each patch other than fair faces of brick work or concrete surfaces including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of oil bound distemper over 1mm thick wall care putty after preparation of new surfaces, complete all as specified and directed. |
| 11 | Supply only ISI marked integral water proofing compound, complete all as specified and as directed. |
| 12 | Material and Labour for complete removal of existing treatment over old surfaces on wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed. |
| 13 | Material and labour for painting one coat of synthetic enamel paint on previously painted old steel surface of any description not otherwise described over 10cm width or girth with including preparation of old decorated surface, complete all as specified and as directed. |
| 14 | Material and labour for repair steel rolling shutters pull and push type or gear opereted including cleaning the side of shutters suspension shafts and guide channels and greasing all the moving parts of rolling shutters and straightening of bolts and nuts as required for smooth functioning of shutters and refixing the same including hood cover complete (any extra nuts and bolts required of appropriate size are to be supplied and fixed by contractor), complete all as specified and as directed. |
| 15 | S & F in repair MS Rat tail type door springs 300mm long ordinary rat tail pattern including roller and roller palate, complete all as specified and as directed. |
| 16 | Material and labour for one coat of white wash on ceiling including preparation of old decorated surface, complete all as specified and as directed. |
| 17 | M&L preparing old surfaces including washing, rubbing down and stopping of distempered and painted surface of wall and applying one coat of acrylic distemper, complete all as specified and as directed. |
| 18 | M&L preparing old surfaces including washing, rubbing down and stopping of one coats of white wash on walls, complete all as specified and as directed. |
| 19 | Material and labour for washing, rubbing down and stopping of existing distempered surface, preparation of surface and applying wall care putty to an average thickness of 1 mm, including sanding/rubbing down to obtain a smooth and uniform surface, followed by application of one coat of plastic emulsion paint, complete all as specified and directed. |
| 20 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.50 Sqm in each, complete all as specified and directed. |
| 21 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. |
| 22 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 23 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board or commercial plywood laminated from backside and fixed to wall on Steel plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 24 | Supply and fix 150mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 25 | Supply and fix 150mm size Aluminium handles, cast type anodised, complete all as specified and as directed. |
| 26 | Supply and Fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement, complete all as specified and as directed. |
| 27 | Supply and Fix aluminium with powder coating (minimum thickness of powder coating 50 micron) frame 92 mm x 29.5 mm for three track sliding windows with one or more rebates including joining cleat for fixing etc., with sliding type shutters, without sash bars, aluminium sections with powder coated (minimum thickness of powder coating 50 micron) 39 mm x 20 mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium with powder coated (minimum thickness of powder coating 50 micron) snap beading, screws etc. (Thickness of aluminium sections not less than 1.5 mm) with suitable sliding & locking arrangement, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 4.8 mm thick sheet glass tinted, complete all as specified and directed. |
| 28 | Supply and fix in repairs anodised aluminium frame for door with anodised aluminium push/ pull glazed type shutters with lock rail made out of aluminium section 65x38 mm for frame 80x45 mm for stiles 80x45 mm for top rail and 115x45 mm for bottom rail and necessary jointing cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws, anodised aluminium handles, lock and keys including supply and fixing of 5.00 mm thick tinted glass, complete all as specified and directed. |
| 29 | Supply and fix in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. |
| 30 | Supply and fix in repairs Mild Steel Mortice lock, vertical type, size 100 mm, 2 levers, complete all as specified and directed. |
| 31 | Supply and fix in repair for 4 mm thick tinted sheet glass, ordinary quality and glazing with rubber bead exc 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description), complete all as specified and directed. |
| 32 | Supply and fix in repair Wash basin 550x400mm Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed. |
| 33 | Supply ans fix in repairs, Vitreous China wash down water closet pan EWC (pedestal pattern) white with plastic sheet cover including fixing bolt and making good damaged portion, complete all as specified and directed. |
| 34 | Supply and fix in repairs 10 liters capacity PVC valve less syphonic action type, flushing cistern low level, with inlet, ball valve and brackets etc, complete aal as specified and directed including taking out old one, complete all as specified and directed. |
| 35 | Supply and fix in repairs 15mm bore PVC Connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 36 | Supply and fix in repairs Vitreous China Urinal flat back size 465x355x265 mm white (medium) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding Urinal against wall in cement mortar 1:2 securing urinal to plugs, with and including 60mm long brass secrew, pointing around urinal back in cement, complete all as specified and directed. |
| 37 | Supply and fix in repair 50mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 in waste pipe for WHB and sinks, complete all as specified and directed. |
| 38 | Supply and fix in repairs 40 mm dia Waste coupling of PTMT (half or full threaded), (Minimum weight 32mm - 45gms/40mm - 60 gms), complete all as specified and directed. |
| 39 | Supply and fix in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 40 | Supply fix in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 41 | Supply and fix in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc glass, complete all as specified and directed. |
| 42 | S&F in repairs angle valve suitable for 15mm bore pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed one ends for iron pipe or for union, complete all as specified and directed. |
| 43 | S&F in repairs chromium plated brass Shower rose 125mm size suitable for 15mm bore pipe, complete all as specified and directed by Engr- In-Charge. |
| 44 | S&F in replacement 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed Non telephonic type complete all as specified and directed. |
| 45 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised 100mm long, fixed in floors, complete all as specified and directed. |
| 46 | Supply and fix in repair for 30mm dia anodised aluminium alloy tubular curtain rod with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 47 | S&F in repair 15mm bore CP Brass WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repair stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engr- In-Charge. |
| 49 | S&F in repair ABS body CP jet for EWC with 1m long connection pipe and necessary fittings, complete all as specified and directed by Engr- In-Charge. |
| 50 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed |
| 51 | Supply and fix 500 Liters capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks exc 250 & n exc 500 Ltr cap and removing to store, complete all as specified and directed. |
| 52 | Supply and fix 1000 Liters capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks exc 500 & n exc 1000 Ltr cap and removing to store, complete all as specified and directed. |
| 53 | Supply and fix in repair 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 54 | Material and labour 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor including taking down or up the old steel tubing, complete all as specified and as directed. |
| 55 | Refixing of galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking down or up the old exisitng steel tubing complete all as directed.Notes:-(i) While fixing of pipe new fittings as required shall be provided by the contractor and cost of same shall be deemed included in the unit rates of this item.(ii) The old pipe shall be cleaned properly before use in the work and cost of cleaning is included in the unit rate of this item. |
| 56 | Material and labour 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor including taking down or up the old steel tubing, complete all as specified and as directed. |
| 57 | Refixing of galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking down or up the old exisitng steel tubing complete all as directed.Notes:-(i) While fixing of pipe new fittings as required shall be provided by the contractor and cost of same shall be deemed included in the unit rates of this item.(ii) The old pipe shall be cleaned properly before use in the work and cost of cleaning is included in the unit rate of this item. |
| 58 | Cleaning of sewage line/ pipe by rodding in to manhole suitable method to clear the sludge/ blocking etc logged in side the sewage line and well flushing with water to drain the loose sludge etc inside the sewage line from manhole to manhole including removing and re-fixing the manhole cover 100mm size, complete all as specified and directed. |
| 59 | All as per Item No 58 here-in-before but in size 150mm, complete all as specified and directed. |
| 60 | All as per Item No 58 here-in-before but in size 200mm, complete all as specified and directed. |
| 61 | Cleaning of WC/Kitchen/bathroom NT by taking out blocked wastes/silt and mud, including removal and washing down throughly for free flowing, complete all as specified and directed. |
| 62 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of 250 to 500 ltrs capacity tanks incl disconncting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc including washing the tanks and draining out dirty water, complete all as specified and directed by Engr- In-Charge. |
| 63 | All as per item No 51 above but 1000 ltrs to 2000 ltrs capacity PVC water tanks, complete all as specified and directed by Engr- In-Charge. |
| 64 | Repairing the structure with using a flexibal crack filling compound for filling the cracks of size width n exc 10 mm and depth n exc 15 mm, complete all as specified and as directed. |
| 65 | Supply and fix in repairs mild steel pressed handles, oval type, stove enamelled black 125mm long complete all as specified and as directed. |
| 66 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 67 | Removing vegetation from wall/chajja/slab removing loose mortar/plaster and debris arising out of vegetation removal; filling minor holes, gaps and surface depressions with cement mortar/cementitious(1:4) repair materia and making good surface of building, complete all as specified and as directed |
| 68 | Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and forged into spikes; framed guard bars; barred iron doors,angle/box/channel, storage rack, landing tee, under carriage disc, MS (3-5mm) sheet ledders; including portions framed and hungs gate, including pintle hinges, stops, hand made sliding bolts, etc con-forming to Fe.290.Gde-E-165 (ISI Marked), complete all as specified and directed by Engr- In-Charge. |
| 69 | Materials and Labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in steps, jambs, pillars, window-cills, cooking platforms and like floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the Stn premises, complete all as specified and directed. |
| 70 | Materials and Labour for, Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the Stn premises, complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender