Tender For Providing Boundary Wall With Gate Around E And M Workshop Shed Near Sub-Station And Excavation Workshop At Jagannathpur Ocp Of Bhatgaon Area.
Tender Value
25.89 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
9 days left
EMD
32400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surajpur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Boundary Wall With Gate Around E And M Workshop Shed Near Sub-Station And Excavation Workshop At Jagannathpur Ocp Of Bhatgaon Area.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 3 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of cetring, shuttering, finishing and reinforcement - all work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) . |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 6 | Brick work with fly ash bricks in foundation and plinth in Cement mortar 1:4 (1 cement : 4 sand) |
| 7 | Brick work with flyash brick in superstructure from P.L. to floor V level in cement mortar 1:6 ( 1 cement : 6 sand ) |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement of mix. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for. Foundations, footings, bases of columns, etc. forma ss concrete |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls ( any thickness) including attached pilasters, buttresses, plinth and string course etc . |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for. Columns, piers, abutments, pillars, posts and struts. |
| 12 | Reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete. |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. inlayers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5 m |
| 14 | White washing with lime to give an even shade: New work (three or more coats) |
| 15 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 16 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-incharge,with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). |
| 17 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender