Tender For Maintenance Of Road At Pallanwala, Rakhmuthi Mil Stn And Its Outstation Under Ge (S) Akhnoor
Tender Value
79 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
24 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Road At Pallanwala, Rakhmuthi Mil Stn And Its Outstation Under Ge (S) Akhnoor
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for repair to pot holes, any depth, not exc. 1 Sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, path etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat at 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blended with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm, complete all as specified and directed. |
| 2 | Material and labour for preparing black top surface by brushing with wire brushes for removing cake mud etc sweeping with broom and finally the cleaned suface with gunny bag to remove all loose dirt etc, complete all as specified and directed. |
| 3 | Material and labour for applying evenly a priming/tack coat with bituminous primer at 05 kg per 10 sq metre using paving Bitumen of grade VG-10, complete all as specified and directed. |
| 4 | Material and labour for bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with paving bitumen of grade VG-30, 5.5 % binder content by weight of total mix, rolled and compacted to required camber and gradient, complete all as specified and directed. |
| 5 | Material and labour for premix bituminous macadam with paving bitumen (Grade VG-30) @4% by weight of total Mix, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), complete, all as specified and directed by Engineer-in-Charge. |
| 6 | Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry or laid dry and pointed complete all as specified and directed. |
| 7 | Material and labour for hard core of guage not exceeding 63mm deposited, spread and levelled in layers not exceeding 15 CM thick watered and rammed to a true surface with broken or boulders complete all as specified and directed by Engr-in-Charge. |
| 8 | Material and labour for 75mm plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floor/sub-base and finished even and fair, complete, all as specified and directed. |
| 9 | Material and labour sand filling under floors or in foundations including watering and consolidation 30mm thickness, complete all as specified and directed. |
| 10 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2021 of 80 mm thickness, M-35 Grade laid with grey cement and mixed with pigment, complete all as specified and directed. |
| 11 | Material and labour for providing cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in kerbs or mud stops slightly rounded or chamfered angles and throating including necessary form works, complete all as specified and directed. |
| 12 | Providing and laying at or near gound level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints exept at sharp curve shall not to more than 5mm), including making drainage opening wherever required compete. |
| 13 | Material and labour for 2.5m thick Hot Thermo plastic road marking strips, line dashes, arrows letters etc on road pavments width not exceeding 10cm wide in white or golden yellow colour according to IRC-37-1970, confirming to British specification 3762 with 20% glass beads having reflective index of 1.5mm, 75% spherical indigenous or for foundation plan having sufficient strength to withstand heavy load withoout deforming and having softening point 25 to 35, complete all as speicifed and as directed by Engineer-in-Charge. |
| 14 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed, complete all as specified and directed. |
| 15 | Supply and fixing 100cm road safety convex mirror made up of polycarbonate reflective mirror with adjustable bracket, Mild steel pipe 50mm dia 2.0 mtr height including embedding in PCC 1:2:4 (450x450x450mm) type B1 complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fixing cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions all as directed by Engr-in-Charge. |
| 17 | Supply only Paving Bitumen grade VG-30. ( For Price adjustment in Job Mix Formula) Rate is Rs 68.00 per Kg. |
| 18 | Note:- Deduction for Schedule of credit (Sch 'A' Part-II) to be made of Rs 33250.00 from the total quoted amount of BOQ while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender