Tender For Construction Of Mpc Building In Haludbani Village Under Ghatshila Block District East Singhbhum.
Tender Value
60 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
7 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mpc Building In Haludbani Village Under Ghatshila Block District East Singhbhum.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | E/W in exavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated Earth as obtained to a distance up to 50m.including all liftS. Levelling, ramming the foundation trenches,removing roots of trees,shrubs all complete as per approved design,building Specification and direcion of E/I |
| 3 | Earth work in excavatiobn trenches and plinth in layer not exceeding 150mm thick will watered remmed fully compacted and fine dressed with earth obtained from excavation of fiybdation trenches with a lead of 50mm and lift of 1.5 M All complete as per direction of E/I |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour, royality and all taxes all complete as per building Specification and direcion of E/I. |
| 5 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royality all complete as per building Specification and direcion of E/I. |
| 6 | providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring - All work upto plinth level 1:2:4 . |
| 7 | Providing R.C.C.M-200 in nominal mix of (1:1.5:3) all work upto plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,shuttering ,mixing cement concrete in mixer and placing in position ,vibrating, striking curing, (but excluding the cost of reinforcement )taxes and royality all complete as per building Specification and direcion of E/I. |
| 8 | Providing R.C.C.M-200 in nominal mix of (1:1.5:3) above plinth level upto 5 floor with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,shuttering ,mixing cement concrete in mixer and placing in position ,vibrating, striking curing, (but excluding the cost of reinforcement )taxes and royality all complete as per building Specification and direcion of E/I. |
| 9 | Providing designation 75Bbrick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M2 to 2.5 including providing 10mm thick mortar joints ,cost of screening materials raking out joints to 15mm depth ,curing, taxes and royality all complete as per building Specification and direcion of E/I. |
| 10 | Providing R.C.C.M-150 in nominal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,shuttering ,mixing cement concrete in mixer and placing in position ,vibrating, striking curing, (but excluding the cost of reinforcement )taxes and royality all complete as per building Specification and direcion of E/I. |
| 11 | providing designation 112mm thick reinfoorcement designation 100A brick work with fly ash lime brick (FLAG) conferming to IS 12894-1990 (9''x4.5''x3'') in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materuials scaffolding raking out joints to 15mm deepth curing taxesand royality (but excluding theb cost of reinforcement) all completet as per building specification and direction of E/I. |
| 12 | providing designation 100mm A brick work with fly ash lime brick (FLAG) conferming to IS 12894-1990 (9''x4.5''x3'') in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materuials scaffolding raking out joints to 15mm deepth curing taxesand royality (but excluding theb cost of reinforcement) all completet as per building specification and direction of E/I. |
| 13 | Providing designation 75Abrick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M2 to 2.5 including providing 10mm thick mortar joints ,cost of screening materials raking out joints to 15mm depth ,curing, taxes and royality all complete as per building Specification and direcion of E/I. |
| 14 | Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing excluding carriage of M.S bars to work sitecutting,bending,and binding with annealed wire with cost of wire removal of rust,placing the the rods in position all complete as per building Specification and direcion of E/I. |
| 15 | 8mm dia |
| 16 | 10Mm dia |
| 17 | 12 to 20 Mm Dia |
| 18 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .9Chajja) |
| 19 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .(Roof Slab) |
| 20 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .(Tie Beam) |
| 21 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .(Column Footing) |
| 22 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .(Column in S/S) |
| 23 | Centering and shuttering including strutting proping etc. and removal of form for foundation, footing basses of column, etc for mass .(Stair) |
| 24 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 25 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 26 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M1.5 with floating coat of neat cement in skirting including rounding of junction with floor, curing,taxes royality all complete as per building Specification and direcion of E/I. |
| 27 | Providing cement flush pointing (1:3) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 28 | Providing two coat of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required scaffolding, washing of floors and taxes all complete as per building Specification and direcion of E/I. |
| 29 | Supplying,fitting and fixing M.S grill made of 20x6mm M.S flat as per approved design and drawing, properly fabricated with joints continuos fillet welded and finished smmoth,carriage of grills to work site,hoisting as per building Specification and direcion of E/I.(where materialsis not supplied by the deppt.) |
| 30 | Providing and fixing fan hook of 16mm dia M.S bar 1m long bent to required size and shape,placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building Specification and direcion of E/I.(where materialsis not supplied by the deppt.) |
| 31 | Supplying,fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S Angle frame of size 60x60x6mm.including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel work,taxes all complete as per drawing Specification and direcion of E/I. |
| 32 | Supplying,fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S Angle frame of size 60x60x6mm.including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel work,taxes all complete as per drawing Specification and direcion of E/I. |
| 33 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building Specification and direcion of E/I. |
| 34 | Providing R.C.C.M-150 in nominal mix of (1:2:4) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,centering,shuttering ,mixing cement concrete in mixer and placing in position ,vibrating, striking curing, (but excluding the cost of reinforcement )taxes and royality all complete as per building Specification and direcion of E/I. |
| 35 | providing and fixing 1st Quality ceramic glazed floor tiles conforming to IS 15622 of approved make in all column, shades except burgundi, Bottel Gree, black of any size as approved by Engineer in Charge in skirting and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade Complete. |
| 36 | Providing and laying 6mm precast white glazed tiles in walls over 12mm thick cement mortar (1:3)and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of caborandum stone, including cost of curing, royality and taxes all complete as per building Specification and direcion of E/I. |
| 37 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 38 | Providing and laying 15mm-23mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thickcement mortar (1:3)and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of caborandum stone, including cost of curing, royality and taxes all complete as per building Specification and direcion of E/I. |
| 39 | Providing 250mm wide brick drain in cement mortar (1:6)with av.150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface, all cmplete as per building Specification and direcion of E/I. |
| 40 | Carriage of Material |
| 41 | Sand (Lead 10 KM) |
| 42 | Stone Chips (Lead 22 KM) |
| 43 | Bricks [Lead 1KM (K) + 7 K.M. (K) = 8 KM] |
| 44 | SANITARY AND PLUMBING WORK |
| 45 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry hindustan or any other ISS approved make with 100mm HCI p trap 15 litres Cl pull and let go flushing cistern of names or other ISS equivalent make complete with at[ fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm Cl body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/l.(A) 580 mm long with 12.5 litre low level PVC cistern |
| 46 | Supplying, fitting and fixing 40 mm high viterous whiteglazed earthen ware E.W.C. with \\"p\\" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) With \\"P\\" trap{b)12.5 lit. low level P.V.C. cistern |
| 47 | supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on paintedC.I OR R.S bracket 32mm C.I brass waste 15mm diaC.I body bras's spindle stop cock of approved quality of' weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/l. |
| 48 | Supplying, fitting ’and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of Hindustan \\"Parry\\" or any other approved ISS make with 5 ltrs. Capacity C.l. automatic fushing cistern of reliance for any other ISS approved make with all fittings with C.l. or RS brackets standard size G.l. flush pipe with fitting clamps 15mm C.l. body brass spindle stop cock of approved quality weight not less than 400 gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber points including painting of exposed part with two coats of proved paint over a priming coat of red oxide cutting ll and floor making good the same etc. all complete per speciifcification and direction of E/I. Flat back standing ïorner (600X350mm) |
| 49 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 8931 15mm nominal bore |
| 50 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore |
| 51 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms |
| 52 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15 mm nominal bore |
| 53 | providing and fixing C.P. extensition Nipple 15mm size with 12'' BSP threads 70mm length and 30mm bredth and weight not less than 18gms |
| 54 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make andshade with 6 mm thick hard board backing : |
| 55 | Providing and fixing PTMT granting of approved quality and colour 125mm nominal dia with 25 mm waste hole. |
| 56 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15mm nominal bore with 45cm |
| 57 | Providing and fixing 32 mm P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings omplete. |
| 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc |
| 59 | 15mm dia |
| 60 | 20 mm dia |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge |
| 62 | 25mm dia |
| 63 | 32mm dia |
| 64 | 40mm dia |
| 65 | Supplying and materials with labour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x450mm G.I. cover with frame 9weight not less than 36kg) in foundation and refilling all completet as per specification and direction of E/I. |
| 66 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 67 | providing and fixing C.P. brass stop cock of standerd designation of approved make conferming to IS 8931 15mm nominal of class designation 7.5 |
| 68 | polythene water storage tank of ISI mark (eg sintex/sinter/himgiri/gangotri) with cover & locking system |
| 69 | providing and fixing PTMT towel rail trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with consolated fitting arrangement of approved quality and colour, weighing not less than 88 gsm. |
| 70 | providing and fixing C.P. towel ring cmplete brackets fixed to wooden cleats with c.p. brass screws with concealed fitting arrangement of approved quality colour and make 9market or equipment) |
| 71 | providing and laying of 110mm dia P.V.C. pipe for outlet of water to outlet drain including all accessories I.e lubricants, solvent cement clamp, ring, socket etc. |
| 72 | Providing and laying 75mm dia P.V.C. pipe for outer of water to outer drain including all accessories I.e lubricants, solvent cement clamp, ring, socket etc. |
| 73 | providing and fixing wall face unplasticised PVC moulded fitting/accessories for unplasticised Rigid PVC rain water pipe conferming to IS 13592 Type A including hointing with seal ring conferming to IS 5382 leaving 10mm gap for thermal expansion. |
| 74 | 75 mm coupler |
| 75 | 110 mm coupler |
| 76 | 75mm single pushfit Coupler |
| 77 | 110mm single pushfit Coupler |
| 78 | 75mm single tee with door |
| 79 | 110mm single tee with door |
| 80 | 75mm single tee without door |
| 81 | 110mm single tee without door |
| 82 | 75mm bend 87.5 |
| 83 | 110mm Bend 87.5 |
| 84 | 75mm shoe (Plain) |
| 85 | 110mm shoe 9Plain) |
| 86 | ELECTRICAL WORK |
| 87 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 88 | Group C |
| 89 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRPVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required |
| 91 | 2x1.5 sqmm+1x1.5sqmm earth wire |
| 92 | 2x2.5 sqmm+ 1x2.5 sq mm earth wire |
| 93 | 4x2.5 sq mm + 2x2.5 sq mm earth wire |
| 94 | 4x10 sq mm + 2x6 sq mm earth wire |
| 95 | Sypplying and drawing co-axail TV cable RG-6 grade 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sjeath in the existing surface/recessed steel/PVC conduit as required. |
| 96 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 97 | 20mm dia |
| 98 | 25mm dia |
| 99 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 100 | 5/6 amps one way switch |
| 101 | 15/ amps one way switch |
| 102 | 5/6 amp 3 pin sicket outlet |
| 103 | 5/16 amp 6 pin socket oultet |
| 104 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 105 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 106 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 107 | 1 or 2 module (78mmx78mmx45mm) for Telephone and TV outlet |
| 108 | 4/5 Module (78mmx140mmx50mm) |
| 109 | 6 Module (78mmx205mmx50mm) |
| 110 | Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/wooden block including connection etc as required. |
| 111 | Supplying and fixing brass button/angle bolderincluding connection etc as required |
| 112 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 113 | Installation of exhaust fan up to 450mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 114 | Supplying and fixing 20 amps, 240 Volts SPN industries type, socket outlet , with 2 pole and earth metal enclosed plug top alongwith 20amps :C: curve SP MCB in sheet steel enclosure on surface or tn recess with chained metal cover for the socket |
| 115 | Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link, earthing etc as required (But without MCB/ RCCB/ Isolator). (Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 116 | 8 way (4+24) Double Door Horizantal Type |
| 117 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts 10KA \\"C\\" Curve Ministure Circuit Breaket Suitable for inductive loads of following poles in the existing MCB DB complete with connection testing and commissoning etc, as required |
| 118 | 6/32 Amp Single Pole |
| 119 | 40 Amp TPN |
| 120 | Supplying and fixing following Single pole, blanking Plate in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 121 | Supplying and fixing of following rating double pole (Single Pole & Neture) 240 volts resuseld current circuit bracket (RCCB) having a sensivity current 30 miliampera in the existing MCB DB complete with. |
| 122 | 40 Amp TPN |
| 123 | Earthing with G.I. Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclouser with cover Plate having locking arrangment and watering pipe etc. |
| 124 | providing and fixing 25mmx5mm G.I. strip on surface or in recess for connetion etc. |
| 125 | providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earting along with existing surface/recessed conduit/submain Switch/ cable as required |
| 126 | Supply of XLPE insulated PVC Sheathed Heavy Duty armourd electrical cable with aluminium conjductor for working voltage upto and including 1100 volts |
| 127 | 4 core 16 sqmm |
| 128 | SITC of Following rating recess/ surface mounted LED round/square shape down light luminarie with presure dia cast housing for single phase supply voltage Luminnatre shall be confermming to IS 10322 part 5/ section 2 or IEC 62722 with all necessary accessories as required |
| 129 | 18/20 W LED round Down Light )Surface0 |
| 130 | Bulk head fitting with 9/10 Watt LED |
| 131 | S.I.T.C of Following rating surface mounted LED Tube Light fitting Suitable for 230 V 50 HZ Single Phase Supply etc. |
| 132 | 10/12 W LED tube Light |
| 133 | SITC of 300,, (12'') Exhaust Fan (Metal Body suitable for Single phase 230 volts 50 Hz AC supply completet with motor, louvers/ Shutters wtc. Complete as required |
| 134 | Supply, Installation, Testing and commissioning of following size fan 3 Blades confirming to IS 374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. |
| 135 | 1200mm (48\\"\\") Ceiling Fan |
| 136 | P/F G.I. Lightning conductor Finalproviding and fixing of lightining conductor final made of 25mm dia 300mm long, G.I tube having single prong at top, with 85mm dia 3mm thick G.I. base Plate including holes etc. |
| 137 | reverting, sweating and soldering lightning conductor tape reverting sweating and soldering of copper/G.I. tape (with another copper/G.I. base of the final or any other metalic. |
| 138 | P/F 25mmx5mm copper sytrip as required. |
| 139 | S/F 80mm dia earthing electrode 2 mtr length/80mm dia earthing Electrod 3 mtr Length/50mm dia Earthing Electrode 2mtr/50mm dia earthing Electrode 3 mtr Length & Backfill Compound chemical 4Bag (per Bag 25kg) |
| 140 | P/F G.I. lightning conductor type in horoizontal run Providing and fixing G.I. tape 20mm x 3mm thick on parapat or surface of wall for lightning conductor complete as required. |
| 141 | P/F G.I. lightning conductor type in vertical run Providing and fixing G.I. tape 20mm x 3mm thick on parapat or surface of wall for lightning conductor complete as required. |
| 142 | P/F Testing Joint G.I. lightning conductor- Providing and fixing G.I. tape 20mm x 3mm thick G.I. Strip, 125 mm long, with 4 nos of G.I. bolts nuts, check nuts and spring washers etc. complete as required. |
| 143 | Borewell |
| 144 | GST @ 18% |
| 145 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender