Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #57219517

Tender For 8549/E8 Repair & Maintenance Of Mes Installation At Bly Stn Under Ge (East) Bareilly

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
24 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
0 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for 8549/E8 Repair & Maintenance Of Mes Installation At Bly Stn Under Ge (East) Bareilly

BOQ

Name of Work:- 8549/E8 REPAIR & MAINT OF MES INSTALLATION AT BLY STN UNDER GE (EAST) BAREILLY
Sl. No. Item Description
1Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
2Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
3Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.
4Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.
5Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
6Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed.
7Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
8Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
9Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
10M&L 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.
11M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed.
12M&L for PCC Type B1 (1:2:4) for copings on brick wall surfaces/ interlocking paths /cherequred tiles including weathering, slightly rounded or chamferred angles and throating , as directed.
13M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
14M&L Glazed ceramic coloured tiles (square/ rectangular) with border in vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge.
15M&L for Vitrified light shade coloured ceramic tiles 8-9 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
16M&L for Vitrified light shade colored ceramic tiles 8-9 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqm skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
17M&L 18 mm thick granite of black colour (table rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.
18M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
19M&L in repairs for machine pressesd coloured glazed chequered cement concrete tiles 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.
20M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
21M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
22M&L in repairs for Machine pressesd pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone 300 x 150 x 450mm including weathering, slightly rounded or chemferred angles and throating including excavation for kerb stone complete all as specified and as directed.
23M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed.
24M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed.
25M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.
26M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
27M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm inculding mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
28M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment including mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note for item No. 27&28: The Cost of Water proofing liquid shall be deemed to be included in this item) Please Enable Macros to View BoQ information
29M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment including mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note for item No. 27&28: The Cost of Water proofing liquid shall be deemed to be included in this item) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57219517
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24 Lakhs
LAST DATE 10-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for 8549/E8 Repair & Maintenance Of Mes Installation At Bly Stn Under Ge (East) Bareilly
Basic Detail
Tender No 8549/E8
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 27 Aug 2026
Submission Date 10 Sep 2026
Open Date 17 Sep 2026
Finance
Tender Value 24 Lakhs
Tender Fee 500
EMD 48000
Exemption Available
Document List
b67924de-0530-4532-a593-41f477752761.html
BOQ_881388.xls
Tender8549.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Sep 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

b67924de-0530-4532-a593-41f477752761.html

xls

BOQ_881388.xls

pdf

Tender8549.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders