Tender For Construction Of Vaterinary Building Near Qalamabad Bridge At Qalamabad Block: Mawer, Panchayat: Qalamabad ,Scheme: Bdc 2026-27, , Advertised Cost:- 19.67 Lacs.
Tender Value
19.67 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
4 days left
EMD
59010
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Vaterinary Building Near Qalamabad Bridge At Qalamabad Block: Mawer, Panchayat: Qalamabad ,Scheme: Bdc 2026-27, , Advertised Cost:- 19.67 Lacs.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechnical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | P/l of hand packed dry stone soling incl. all carriages by MT 10km. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD Wood |
| 8 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm thick KD wood |
| 9 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Using KD wood |
| 10 | Providing and Fixing of Hardware Fittings of approved quality, T-Bots 100MM |
| 11 | T-Bolts 150MM |
| 12 | Handles 125MM |
| 13 | Handles 200MM |
| 14 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and medium tensile steel bars |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 17 | Beams Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Walls |
| 19 | 12mm Plaster in 1:6 mix |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 600X600MM |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 22 | Providing and fixing Ist quality ceramic glazed Floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 23 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 25 | P/f of cost of Conduits in slab including junction boxes complete job , |
| 26 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 27 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap incl. 10 litre low level flushing cistern Long pattern W.C Pan of size 580x440 mm |
| 28 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 29 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore jaquar Essel make |
| 30 | Providing and fixing PVC pipes,of quality, 75mm |
| 31 | 110mm |
| 32 | F-Trap |
| 33 | Cowl 75mm |
| 34 | Collar 110MM |
| 35 | D-Tee 110MM |
| 36 | Soap case |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints |
| 38 | Providing and fixing high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. Thebasesupport i/c fittings & fixtures for tank shall be paid separately |
| 39 | Dry random rubble masonry with hard stone in foundation and plinth: |
| 40 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded including soffit and evaes |
| 41 | Providing corrugated G. S.color coated high rib sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50mm thick |
| 42 | Providing ridges or hips of width 35cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.40MM thick |
| 43 | Providing and fixing of MS Sheets1mm thick for soffit and evaes boarding including cutting welding and placing in position complte job |
| 44 | Carriage of Sand 25 KM |
| 45 | Aggregates 25KM |
| 46 | Carriage of Bricks100 KM |
| 47 | Carriage of Stones 10KM |
| 48 | Add Provision for CIB |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender