Tender For Upgradation Of Community Hall With Truss At Halmatpora B Pyt: Halmatpora B Block: Kupwara
Tender Value
8.38 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
3 days left
EMD
25140
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Community Hall With Truss At Halmatpora B Pyt: Halmatpora B Block: Kupwara
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed |
| 2 | Providing and laying of dry Stone Soling hand packed tightly in bed including levelling & ramming. |
| 3 | Providing and laying in position cement concrete of specific grade M7.5 with 40 mm graded aggregate including cost of cement but excluding cost of centering and shuttering, All work upto plinth level |
| 4 | Providing and laying in position cement concrete of M10 Grade with 20 mm graded aggregate,excluding cost of centering and shuttering, All work upto plinth level |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation plinth and above plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | P/L in position cement concrete of specified grade M15 with 20mm stone aggregates exuding cost of centring shuttering finishing and reinforecement upto floor level |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 8 | Centring and shuttering including strutting, propping etc. and removal of formwork for:,suspended floors etc. |
| 9 | Providing and applying 12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked butt hinges bright finished of required size with necessary screws.(KD wood) |
| 11 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (KD Wood) |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling of 12 mm particle board , all complete as per direction of Engineer-in-charge.i.c all necessary fittings, using KD Wood 32 mm |
| 13 | Providing and fixing glass panes with putty and glazing clips in windows, clerestory windows, all complete 4.0mm thick glass panes(Wherver necessary) |
| 14 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 15 | Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | P/F of 10mm thick Plywood for ceiling i/c (30mmx30mm) wooden cornice & necessary framework i/c Painting wood work with deluxe multisurface paint of required shade.Two or morecoats complete job |
| 18 | Painting wood work with deluxe multisurface paint of required shade.Two or morecoats applied @ 0. 901itre/1Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture. (doors, windows, ceiling & eves boarding) |
| 19 | Finishing walls with acrylic smooth paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 20 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 21 | Providing corrugated G. S. sheet roofing including vertical/ curved surface and Precoated on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required i/c ridges and hips required as per the truss drawing. 0.50mm thick including fixing of plained sheets over ridges and valleys. |
| 22 | Carriage of Materials by MT Aggregate for an average lead of 15 km |
| 23 | Carriage of Materials by MT sand for an average lead of 15 km |
| 24 | Carriage of Materials by MT Bricks for an average lead of 100 km |
| 25 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchargeInternalwork Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm/25mm OD(SDR-7.4),i/c all necessary fittings and fixtures ,complete job |
| 26 | Providing and fixing soil, waste and vent PVC pipes :Including all necesarry fittings like cowl bends/D-bends and other and fixtures. 75 mm Dia |
| 27 | Providing and fixing soil, waste and vent PVC pipes :Including all necesarry fittings like cowl bends/D-bends and other and fixtures. 100 mm Dia |
| 28 | Providing and fixing of Cp grating 100mm dia. |
| 29 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage triple layer tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. |
| 32 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 33 | Providing and fixing of stainless steel soap case of approved quality and make |
| 34 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 35 | Add provision for electric fiitings (to be paid as per actual) |
| 36 | Add for cost of signboard & Photographs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender