Tender For Special Repair To Building No A-21 (Single Jcos Accn) Under Age B/R-Ii Of Ge Saugor
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
8 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No A-21 (Single Jcos Accn) Under Age B/R-Ii Of Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 3 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 4 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed. |
| 5 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 25m thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 6 | S&F uPVC ventilator having provision for 250mm size exhaust fan with louvers in upper portion of ventilator and balance fixed with 5mm thick frosted glass including required rubber gasket, pins etc complete all as specified and directed. |
| 7 | S&F Factory made uPVG white colour Sliding window (area not exceeding 2.00 sqm each), Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. and 5mm thick glazing with selected quality glass, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor includes cost of glass, wire cloth and all other connected/ required accessories. Net Opening will be measured for payment purpose. |
| 8 | S&F factory made uPVC white colour casement (Openable) window (area not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mmlong fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor includes cost of all fitting and fixtures, glass, and all other connected accessories. Net opening will be measured for payment purpose |
| 9 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 10 | M&L for Second class hard-wood in scantlings, Timber framed and fixed, Clean sawn in repair complete all as specified and directed. |
| 11 | S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with 2mm thick Plain colour PVC sheet fixed or laid on one side of board and 2mm thick wood grained prelam PVC sheet on other side of board , using rubber based adhesive, including heat bent of PVC sheet as lipping on the edges of doors, supplying & fixing at site as per specification complete all as specified and directed.Note : total thickness of door shall be 35mm approx.) |
| 12 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surfaces complete all as specified and directed.Note: (i) The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates.(ii) The glass and wire gauge shall be measured and paid separately under respective item here under. |
| 13 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 14 | S&F 200mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 15 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 16 | S&F 150mm long stainless steel floor door stopper, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 17 | S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 18 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 19 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 20 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 22 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per litre) , finished surface fair and even complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 23 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 24 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 26 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx. thickness 1mm) on newly plastered surface of wall/ceiling as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 27 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 28 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 29 | Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified and directed.Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item.(ii) Contractor shall provide purchase vouchers for full quantities incorporated in the work and Engineer-in-charge shall keep defaced purchase vouchers in record and entered the same in MB |
| 30 | Dismantling of railing, discription, in any position complete all as specified and directed |
| 31 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 32 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 33 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed |
| 34 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering for compaction complete all as specified and directed. Note : compacted thickness shall be measured for payment purpose. |
| 35 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 36 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with decorative end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 37 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 38 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 39 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 40 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 41 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 42 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 43 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 44 | S&F PVC (SWR) bends, 110mm bore dia complete all as specified and directed. |
| 45 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 46 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 47 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius. with access door, complete all as specified and directed. |
| 48 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 49 | S&F in repairs of 75mm dia PVC (SWR) floor trap SS grating including jointing with solvent cement complete all as specified and directed.. |
| 50 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 51 | S&F Long Body Bib Cock with Wall Flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No COP-CHR-107NPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 52 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 53 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 54 | S&F Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses, chromium plated with required accessories including taking down existing tap/mixer of any description, complete in all respect as specified and directedMake Jaquar (Cat Part No FUP-CHR-29011BPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 55 | S&F 32mm bore dia bottle trap size with 300 mm & 190mm wall connection pipes & wall flange chromium plated incl required concealed pipe up to trap with required accessories complete in all respect including taking down existing bottle trap/ waste coupling of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-769LX300X190) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 56 | S&F chromium plated Single Lever Exposed Parts Kit of Hi-flow Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button along with concealed part including taking down existing cock/ diverter of any description, as specified and directed.Make Jaquar (Cat Part No FUS-CHR-29065MK- Exposed part & Cat Part No. ALD-CHR-065M-Concealed PArt) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 57 | S&F Soap Dish Holder with wall flange , chromium plated with required accessories complete in all respect including taking down existing Soap Dish Holder of any description, as specified and directed . Make Jaquar (Cat Part No CPA-CHR-1131) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 58 | S&F Single Towel Rail 600mm Long, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1111) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 59 | S&F Towel Rack 600mm long with Lower Hangers with 3 Hooks, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1181FH) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 60 | S&F in repair primium quality stainless steel peg set (Set of 6 Pegs)fixed to wall with PVC plug and SS screws complete all as specified and directed. |
| 61 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 62 | S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 63 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) Please Enable Macros to View BoQ information |
| 64 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender