Tender For Construction Of Iron Jaffri Including Periphery Wall And Cannopy Back Side Verandah At H-7 Sonwar.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Iron Jaffri Including Periphery Wall And Cannopy Back Side Verandah At H-7 Sonwar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc.,and stacking the material within 50 meters lead of :- G.S. Sheet |
| 2 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 meters lead :-above 25 to 40 mm thick |
| 3 | Dismantling of old damaged tiles and cement plaster and like from walls including ranking out joints including disposal of malba out side municipal limits as directed by Engineer Incharge at site |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.:- For thickness of tiles above 25 mm and upto 40 mm. |
| 5 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:-1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Providing and fixing pre-color coated galvanized iron high rib sheets / tile profile ( size, sha pe and pitch of corrugationas approved by Engineer-in- charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappings crews of size ( 5.5x55 mm)with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required(to be placed vertically). |
| 7 | Earth work in excavation by manual means in trenches for found ations,drains, pipes,cables etc.( not exceeding 1.5 m in width ) and for shafts, wells,cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of Soil upto 1 meter from cutting edge |
| 8 | Providing and laying dry stone soling in theTrenches / fields duly hand packed in level including ramming with iron rammers for foundation including all carriages up to 15 kms, Loading and unloading. |
| 9 | Providing and laying in position cement concrete of specifi ed grade include ing curing but excluding the cost of centr ing and shuttering.All work upto plinth level with:1:4:8 (1cement: 4 coarses and: 8 graded stone aggregate 40 mmnominal size) |
| 10 | Providing and laying in position cement concrete of specifi ed grade include ing curing but excluding the cost of centr ing and shuttering.All work upto plinth level with:1:2:4 (1cement:3 coarses and:6 graded stone aggregate 20 mm nominal size) |
| 11 | Centering and shuttering including strutting ,propping etc.and removal of form for: , balconies and access platforms.Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc.complete. 679 Hot finished welded type tubes |
| 14 | Providing and fixing UV stabilized fiber glass rein forced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.The sheets shall be manufactured out of 2400 TE Xpanelrovigs in corporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness with out air pockets and shall conform to IS:10192 and IS:12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.: 2mm thick corrugated (2.5\\"or4.2\\"or6\\")orstep-down(2\\"or3\\"or 6\\") as specified |
| 15 | Providing and fixing plained eaves boarding.:- 2nd class kail wood 250x32 mm (nominal size ) |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 600 x 1200 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 17 | Providing and fixing Ist quality ceramic Floor tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 600 x 600 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 18 | Providing and laying Vitrified tiles in floor with different sizes(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based)conforming to IS: 15477,in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600mm |
| 19 | Providing and fixing of imported PVC panelling of approved make and pattern including base work of GI channels with necessary screw and cornice at the the carriage complete as per the direction of EIC at site |
| 20 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats ) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 21 | Varnishing with varnish of approved brand and manufacture an under coat of flatting varnish |
| 22 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 23 | Providing & laying of 25mm pvc conduit of approved brand |
| 24 | Providing and fixing of Kitchen cabinets / Amirah made of 19mm thick (BWR)ply wood in sides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with sun-mica mirror polished as per approved drawings icluding one coat of primer and painting two or more coats of synthetic enamel paint of approved quality and color inside including all Brass hardware fittings,glazing and drawer telescopic channels etc. wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinet will bemeasured for payment) including all carriages:-600mm |
| 25 | Carriage of Materials by MT from source upto site. |
| 26 | 40mm below aggregate and Sand for 15 Km |
| 27 | Providing and fixing of following size of PVC(Prince make) fittings ISI marked. |
| 28 | 100mm dia door bend |
| 29 | 100mm dia Plain Bends |
| 30 | 100mm dia coller |
| 31 | 75mm dia plain bend |
| 32 | Joint dia coller |
| 33 | Joint connector |
| 34 | 75mm plain tee |
| 35 | 75mm pipe |
| 36 | 100mm pipe |
| 37 | 75mm floor trap |
| 38 | Providing and fixing 3 layer PP R Pipes conforming to IS 15801 UV stabilized and anti microbial fusion welded, having thermal stablity for hot and cold water supply including all PP R plain and brass thread fitting including testing of joints complate as per direction of Engineer in charge . intenal work concealed fixing the pipes with clamps at 1.00meter spacing including cutting cheses and making good the walls etc. |
| 39 | PPR 25mm dia pipe conselled |
| 40 | PPR 32mm dia exposed |
| 41 | 25mm Tee |
| 42 | 32mm Tee |
| 43 | Ball valve 25MM |
| 44 | Ball valve 32MM |
| 45 | Cross over 25mm |
| 46 | Male thread adopter 25/15mm |
| 47 | Male thread adopter 32/25mm |
| 48 | Male thread Elbow 25/15mm |
| 49 | Male thread Elbow32/25mm |
| 50 | Female thread adopter 25/15mm |
| 51 | Female thread adopter 32/25mm |
| 52 | Female thread elbow 25/15mm |
| 53 | Female thread elbow 32/25mm |
| 54 | Female Tee 25mm |
| 55 | PP-R Pipe 25mm (Exposed) |
| 56 | PP-R Pipe 32mm |
| 57 | Tankey connector 32mm |
| 58 | Providing and fixing indian type WC pan flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, |
| 59 | Providing and fixing white wash basin of standard size ( Parryware /hindware / cera or equivalent) including pedistal all necessary fittings and fixtures as per the directions of Engineer Incharge at site complete |
| 60 | Construction of brick masonry manholes using second class bricks in 1 : 6 mix including flooring, finishing and CI main hole covers with frames and carriages of all materials.18''x18'' |
| 61 | Construction of brick masonry manholes using second class bricks in 1 : 6 mix including flooring, finishing and CI main hole covers with frames and carriages of all materials.12''x12'' |
| 62 | Providing and fixing of CP fittings of Jaquar or equivalent make. |
| 63 | Angle value |
| 64 | Wall mixer |
| 65 | Basin mixer |
| 66 | Soap case |
| 67 | Towel ring |
| 68 | Tumbler |
| 69 | Toilet paper holder |
| 70 | Glass Shalves |
| 71 | Corner shalves |
| 72 | CP gratting. |
| 73 | PVC connections |
| 74 | Looking mirror with PVC frame. |
| 75 | CP towel rod |
| 76 | C.P waste Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender