Tender For Construction Of C Office / Site Office At Sonwar Srinagar.
Tender Value
29.66 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
16 days left
EMD
59320
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of C Office / Site Office At Sonwar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures ( Culverts , R/E/B walls, as per drawings and technical specfication incld setting out, construction of shoring and bracing ,removal of stumps and other deleterious matter dressing of sides and bottom,backfilling the excavated earth to the extent required and utlizing the remaining earth locally for road work complete incl. dewatering as per MORTH Technical specification clause-304 |
| 2 | Providing and laying of stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts carriage complete. |
| 3 | P/L in position cement conc. of specified grade excluding the cost of centering and shuttering. All work upto plinth level. 1:4:8(1cement:4 coarse sand : 8 crushed graded stone agg. 40 mm size crushed) including all carriages of material involved. |
| 4 | P/L in position cement conc. of specified grade excluding the cost of centering and shuttering. All work upto plinth level. 1:1.5:3(1cement:1.5 coarse sand : 3 crushed graded stone agg. 40 mm size crushed) including all carriages of material involved. |
| 5 | P/L in position cement conc. of specified grade excluding the cost of centering and shuttering. All work upto plinth level. 1:2:4(1cement:2 coarse sand : 4 crushed graded stone agg. 40 mm size crushed) including all carriages of material involved. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings , balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 8 | Centring and shuttering incld. strutting propping etc and removal of form work ( For Culverts , Drains ) of 19 mm kit-ply/M.S Plates) |
| 9 | Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Brick work with F.P.S bricks of class designation 75in super structure upto floor -v lavel in: Cement mortar 1:6 (1 Cement : 6 coarse sand) Inculding cost and carriage of all material & curing). |
| 13 | Providing & fixing wood work in frames of doors, windows & other frames, wrought framed & fixed in position KD wood incl carriages etc upto site of work complete). |
| 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes inluding ISI marked M.S pressed butt hinges bright finished of required size with necessary screws.1st class Kail wood. |
| 15 | Providing and fixing 35mm thick paneled or paneling and glazed shutters for doors, windows and clerestory windows including I.S.I. Marked black enameled M.S. butt hinges with necessary screws excluding paneling, (which shall be paid for separately) KD wood. |
| 16 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws. (Ist.class Deodar wood.) |
| 17 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete). (including carriage of materials from source to site) |
| 18 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 19 | Providing and fixing pre-color coated galvanized iron high rib sheets / tile profile ( size, sha pe and pitch of corrugationas approved by Engineer-in- charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappings crews of size ( 5.5x55 mm)with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required(to be placed vertically). |
| 20 | Providing and fixing of colour coated PGI Sheet for ridge/valley incl washels nails etc of 0.50m thick incl all carriages |
| 21 | P/F of 16mm dia 45cm long truss bolts. |
| 22 | Providing and fixing Ist quality ceramic glazed Digital wall tiles Size of Tile 1200 x 600 mm. of approved make like SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 23 | Providing and fixing Ist quality ceramic glazed floor tiles 600x600mm conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 600 x 600mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 24 | Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & thelike consisting of(i) Ist course of applying cement slurry@ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrdcourseofapplyingblown orresidual bitumenappliedhot at1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other withbitumen @ 1.7 kg/sqm). |
| 25 | Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts & wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 26 | Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified pattern. (Birla make) (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 27 | Applying priming coat on new wood and wood based surface with ready mixed wood primer (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces |
| 29 | Applying cement primer coat of approved brand and manufacture on new work |
| 30 | Wall painting with exterior emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 31 | Providing and laying vitrified floor tiles in different sizes(thickness tobe specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints withwhite cement and matching pigments etc. complete Size of tile 600x600mm |
| 32 | Supply and fixing of 2mm thick unbreakable 20/25 mm dia Sft PVC conduit as per the approved layout & design including necessary sadles, bends other fixing material complete in R.C.C. slab during concreting including making good of damages if occurred during the execution of concreting. |
| 33 | P/F 100mm 4 way junction |
| 34 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper thearchitectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurryand pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishingetc.all complete as specifiedand as directed by the Engineer-in-Charge Flamed finish granite stone slabJetBlack, CherryRed, Elite Brown,Cat Eye or equivalent. |
| 35 | Carriage of Materials by MT from source upto site |
| 36 | 40mm below aggregate and Sand for 15 Km |
| 37 | Bricks for an avg lead of 15 Km |
| 38 | Providing and fixing of following size of PVC(Prince make) fittings ISI marked. |
| 39 | 100mm dia door bend |
| 40 | 100mm dia Plain Bends |
| 41 | 100mm dia Collar. |
| 42 | 100mm x 75mm dia reducer. |
| 43 | 100mm plain tee |
| 44 | 100mm Door tee |
| 45 | 100mm clips |
| 46 | 100mm Pipe B-Type |
| 47 | 75mm dia Door bend. |
| 48 | 75mm dia Plain bend. |
| 49 | 75 mm dia Collar. |
| 50 | 75mm dia floor Traps. |
| 51 | 75mm dia vent cowls. |
| 52 | 75mm dia PVC(Prince Clips). |
| 53 | 75mm dia Door Tee |
| 54 | 75mm Pipe B-Type |
| 55 | Providing and fixing 3 layer PP R Pipes conforming to IS 15801 UV stabilized and anti microbial fusion welded, having thermal stablity for hot and cold water supply including all PP R plain and brass thread fitting including testing of joints complate as per direction of Engineer in charge . intenal work concealed fixing the pipes with clamps at 1.00meter spacing including cutting cheses and making good the walls etc. |
| 56 | PPR 25mm dia pipe conselled |
| 57 | 25mm Tee |
| 58 | Ball valve 25MM |
| 59 | Cross over 25mm |
| 60 | Male thread adopter 25/15mm |
| 61 | Male thread Elbow 25/15mm |
| 62 | Female thread adopter 25/15mm |
| 63 | Female thread elbow 25/15mm |
| 64 | Female thread elbow 32/25mm |
| 65 | Tankey connector 32mm |
| 66 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of four squatting plates with 10 liter P.V.C. automatic flushing cistern Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender