Tender For Construction Of Security Barak Including Other Allied Works At H-1 Gupkar Srinagar.
Tender Value
28.72 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
14 days left
EMD
57440
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Security Barak Including Other Allied Works At H-1 Gupkar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead 50M from edge of cutting .All kinds of soil. |
| 2 | Supplying and laying of dry stone soling hand packed tightly including ramming, watering and carriages complete. |
| 3 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work up to all levels. 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) Crushed |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggre gate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with: 1:1½:3 (1cement: 1½coarsesand: 3gradedstoneaggregate 20mm nominal size) |
| 6 | Supplying and filling in plinth with stone dust under floors i/c watering and compacting,consolidation and carriage of materials upto site all complete. |
| 7 | Carriage of material by MT and head load from source up to site of work. |
| 8 | Sand /Stone aggregate below 40mm nominal size. (80 Mtr + 15 Km) |
| 9 | Bricks for an avg lead of 80 Mtr + 15 Km |
| 10 | Steel for an avg lead of 80 Mtr |
| 11 | Cement for an avg lead of 80 Mtr |
| 12 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 13 | Centering and shuttering including strutting propping etc. removal of form work in Foundation footings basis of columns etc. for mass concrete. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 14 | Brick work with FPS bricks of class designation 75 in super structure above plinth level up to floor V level. In cement mortar 1cement: 6 fine sand mortar. |
| 15 | 20 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand) |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixedin position with hold fast lugs orwith dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 17 | Providing hoisting and fixing trusses/purlins/rafters/ posts/post plates or like components including cost ofscrews etc. complete: FirstclassBudloo/Firwood |
| 18 | Providing and fixing 0.5mm thick pre-color coated iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 19 | Providing & fixing plained eaves boarding 250x32mm (nominal size) in First Class KD wood including cost of applying priming coat and Two or more coats of synthetic enamel paint complete. |
| 20 | Providing and fixing 12mm thick ply wood of good quality in sofit at all places including cost of nails, adhesives and etc complete |
| 21 | Providing and Fixing 50mm thick imported wooden ornamantal Cornice Fixing in Position with necessary nails. |
| 22 | Providing and fixing Ist quality ceramic glazed Digital wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing Ist quality ceramic Floor tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 600 x 600 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 24 | Providing and fixing 35 mm thick paneled door shutters, including ISI marked black enameled M.S.butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminatedas per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) First. Class K.D/Silver wood. |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters in hinges bright finished of required size with necessary screws. including primer coat (imported kail wood 35 mm |
| 26 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Imported KD wood 35 mm thick |
| 27 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RC.C. top slab with 1:1 ½: 3 mix (1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line |
| 28 | Construction of Soakage pit perforate dring type incl.excavation and fixing precast rings exinclding precast cover complete |
| 29 | Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of ground work of 12mm to10mm (as per requirement) thick ply 50mm wide 600mmX600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost ofnails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 30 | Providing and fixing glass panes with wooden fittings of required size wherever necessary glass panes 3.5mm thick weighing 8.75Kg/ Sqm |
| 31 | Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08% and conformingtoIS:15622 of approved make,in all colours and shades, laid on 20mm thick cement mortar 1:4 1 cement :4 coarse sand including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600 x 600mm. |
| 32 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120grams per sqm as per IS:277, in240mp a steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete .Ridges plain(500-600mm) |
| 33 | Chequerred precast cement concrete tiles 22mm thick in foot path and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing ,cleaning and curing complete ,on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). Light shade using white cement |
| 34 | Finishing walls with acrylic smooth exterior paint of required shade on New work Two or more coats applied 1.67liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 35 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 2mm thick |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an evens shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 37 | Providing and fixing of Kitchen cabinets/Amirah made of 19 mm thick (BWR) ply wood insides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with sun-mica or teak wood mirror polished as per approved drawings icluding one coat of primer and painting two or more coats of synthetic enamel paint of approved quality and color inside including all Brass hardware fittings ,glazing and drawer telescopic channels etc.wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinetwill be measured for payment) including all carriages :-300 mm |
| 38 | Providing and fixing of Kitchen cabinets/Amirah made of 19 mm thick (BWR) ply wood insides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with sun-mica or teak wood mirror polished as per approved drawings icluding one coat of primer and painting two or more coats of synthetic enamel paint of approved quality and color inside including all Brass hardware fittings ,glazing and drawer telescopic channels etc.wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinetwill be measured for payment) including all carriages :-600 mm |
| 39 | Providing and laying Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper thearchitectural drawingswith18mmthick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement :4coarsesand) laid and jointedwith cement slurryand pointingwith white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.all completeas specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab JetBlack, CherryRed, Elite Brown,Cat Eye or equivalent. |
| 40 | Providing 40x5mm flat iron holdfast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 41 | Providing and fixing 15cm wide 45cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mmsize, bolts, nutsand washers etc.including making necessary connections with rain water pipes complete. 0.63mm thick with zinc coating not less than 275 gram/m2 |
| 42 | Providing edge moulding to 18mm/16mm thick marble stone counters, Vanities etc. Including machine polishing to edge to give highg loss finish etc. complete as per design approved by Engineerin-Charge. GraniteWork |
| 43 | P/f aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868 transparent or dyed to required colour or shade with necessary screws etc. complete. 100x10mm |
| 44 | Providingand fixingof alumunium hardware fittings of standard quality and of required size.Handles 150mm |
| 45 | Providingand fixingof alumunium hardware fittings of standard quality and of required size.Handles 100mm |
| 46 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc., wherever necessary complete 25mm dia |
| 47 | Providingand fixing of PVCpipe (TypeB) of approvedquality (Prince / Finolex / Jindal / Astralmake ) in proper gradient in excavated trenches including jointingand refilling the excavated material and refurbishing complete incld carriage of excavation. 100 mm nominal dia |
| 48 | Providingand fixingof PVCpipe (TypeB) of approvedquality (Prince / Finolex / Jindal / Astralmake ) in proper gradient in excavated trenches including jointingand refilling the excavated material and refurbishing complete incld carriage of excavation. 75mm nominal dia |
| 49 | P/F of Pvc 75mm plian Bend |
| 50 | P/F of Pvc 100mm Plian Bend |
| 51 | P/F of Pvc Plain Tee 75 mm dia |
| 52 | P/F of Pvc Plain Tee 100 mm dia |
| 53 | P/F of Pvc Door Tee 100 mm dia |
| 54 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801,UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at1.00 meters pacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 56 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801,UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 32mm OD(SDR-7.4) |
| 57 | Providing andfixing 3 layer PP-R (Poly propylene Random copolymer) fittings Male Thread Elbow 25x15mm dia. Nominal bore |
| 58 | Providing and fixing of brass ball cock of approved quality and make as per the directions of Engineer Incharge at site. (15mm) |
| 59 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250mm. |
| 60 | PPR Ball Valve 32 mm dia. Nominal bore |
| 61 | PPR Male adopter 32x20mm mm dia. Nominal bore |
| 62 | PPR Socket 25mm mm dia. Nominal bore |
| 63 | PPR Socket 32mm mm dia. Nominal bore |
| 64 | PPR Union 32mm mm dia. Nominal bore |
| 65 | Tank Nipple 20 mm dia. Nominal bore |
| 66 | Providing and Fixing Cromium plated sanitary fittings of approved quality Sink Mixer |
| 67 | Providing and Fixing Cromium plated sanitary fittings of approved quality Towel Ring 20 mm dia |
| 68 | Providing and Fixing Cromium plated sanitary fittings of approved quality Nipples 25 mm to 50 mm 15mm dia |
| 69 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets andguard rail complete fixedwith40mmlongscrews, rawl plugs, etc. complete. |
| 70 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 71 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Angle Valve |
| 72 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Wash Basin mixer Single hole |
| 73 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Wall mixer |
| 74 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Health Faucet with required Chain Tube |
| 75 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Soap Case |
| 76 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar.Towel Rail single 600 mm long |
| 77 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Corner Shelves |
| 78 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. CP waste |
| 79 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar. Grating 100 mm dia |
| 80 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap,10liter low level white P.V.C. flushing cistern, including flush pipe (of approved make with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests |
| 81 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid,10liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 82 | Providing and Fixing Cromium plated sanitary fittings of approved quality Jaquar.Bib Cock |
| 83 | Providing and fixing of white vitreos wash basin with pedestal of approved quality complete Job |
| 84 | Providing and fixing uplasticized PVC connection pipe with brass unions--30 cm length for 20 mm nominal bore |
| 85 | Providing and Fixing of Door Closer of approved make and quality:-hydric type Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender