Tender For annual repair & maintenance of Various Residential Qtrs At Kasumpti, Shimla- 171009. (Sh:- Repair Of Toilet , Bath, providing and Fixing Cupboard Covering Of Balcony In Type Ii Set No 19 And Railing In Approach Road Of Colony At Mehli Kasu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Sep 2026
3 days left
EMD
8500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Various Residential Qtrs At Kasumpti, Shimla- 171009. (Sh:- Repair Of Toilet , Bath, providing and Fixing Cupboard Covering Of Balcony In Type Ii Set No 19 And Railing In Approach Road Of Colony At Mehli Kasumpti Shimla).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres, lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:3:6 (One cement : Three coarse sand) : Six graded stone aggregate 20 mm nominal size) |
| 4 | (ii) 1:2:4 (1 cement : 2 Coarse sand ) :4 Graded stone aggregate 20 mm nominal size ) |
| 5 | Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floor , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. 15 mm nominal bore |
| 6 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 40 mm dia. |
| 7 | (ii) 90 mm dia. |
| 8 | (ii) 110 mm dia. |
| 9 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing withm approved adhesive, cost of cutting and making good the wall and floors etc. complete. (i) 110 mm x 90 mm , lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 10 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90 mm dia. |
| 11 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90 mm dia. |
| 12 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90 mm dia. |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12 mm thick cement mortar 1:3 (One cement : Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 14 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x600 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 15 | Providing and laying Baroda green marble in flooring 20 mm (average) thickness base of cement mortar 1:3 (1 cement :3 sand ) laid over and jointed with grey cement slurry mixed with with pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick. |
| 16 | Extra for Making double moulded nosing in terrazzo including returned moulded ends and angles to moulding , including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 17 | Half brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. |
| 18 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:4 (one Cement: Four Sand). |
| 19 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. |
| 20 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (i) Float glass panes of nominal thickness 4 mm including carriage of materials in all leads as per directions of the Engineer-in-Charge. (weight not less than 10kg/sqm) |
| 21 | Froster glass 5 mm thick |
| 22 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 23 | Providing and fixing 15mm mixer for kitchen sink with top / bottom swinging spout. including carriage of materials in all leads as per directions of the Engineer-in-Charge. MAKE ESSCO or Equivalent. |
| 24 | Providing and fixing hand faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 25 | Providing and fixing 100 mm sand cast Iron grating for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 26 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. MAKE ESS ESS. |
| 27 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS. |
| 28 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (E.S) MAKE Seiko or Equivalent. |
| 29 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore with 45 cm length . MAKE VIKING . |
| 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32 mm dia. MAKE VIKING . |
| 31 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. . MAKE ESS ESS . |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESSCO or Equivalent .. MAKE ESS ESS . |
| 33 | Providing and fixing wash basin, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS . |
| 34 | Providing and fixing C.P brass toilet paper holder within , including carriage of materials in all leads and lifts and other incidentals, as per directions of the Engineer-in-Charge. |
| 35 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 36 | Providing and fixing C.P grating for floor traps or Nahani trap, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 37 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing thetrap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to bemeasured and paid for separately) including carriage of materials in all leads as per directions of the Engineer-in-Charge . |
| 38 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 39 | Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 40 | Providing and fixing C.P Zet for water closet (European type) complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 15 mm nominal bore. |
| 41 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 42 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick. |
| 43 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 44 | Providing and fixing magnetic catcher , ISI marked , with necessary screw etc , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 45 | Providing and fixing SS handles , ISI marked , with necessary screw etc , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100 mm . |
| 46 | Providing and fixing beading 19x6 mm section i/c mitring junctions with wood screws and nails complete, including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 47 | Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate with C.P brass screws and wooden plugs etc where ever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 25mm dia. |
| 48 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings , frames , guard bar , lasser, railing , brackets , gates and similar works Labour rate. |
| 49 | (ii) In gratings , frames , guard bar , lasser, railing , brackets , gates and similar works Through rate . |
| 50 | (iii) Hollow section similar work |
| 51 | Providing and fixing welded mesh 25x25x3mm to wood or steel members in partitions etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 52 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 53 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work |
| 55 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) Old work (one or more coats) including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 56 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender