Tender For Fabrication, Supply And Installation Of Bus Ducts And Associated Works For Upgradation Of Power Supply System For Nrg Facilities.
Tender Value
1.51 Crore
Estimated cost
Bid Submission
12 Oct 2026
27 days left
EMD
3.56 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Supply And Installation Of Bus Ducts And Associated Works For Upgradation Of Power Supply System For Nrg Facilities.
BOQ
| Sl. No. | Item Description |
| 1 | Design Fabrication Supply installation testing and commissioning of 415V, 4000A, 80 kA (1 sec.) sandwich type copper bus duct system as per technical specifications and tentative layout drawing attached. Quantity of bus duct straight run and accessories shall be as per items given below . |
| 2 | Bus Duct Straight Run, IP66 Outdoor type. |
| 3 | Bus Duct 90-Degree Bend, IP66 Outdoor type. |
| 4 | Bus Duct Straight Run, IP55 Indoor type. |
| 5 | Bus Duct 90-Degree Bend, IP55 Indoor type. |
| 6 | Bus Duct Flange End, IP66 Outdoor type, for equipment termination complete with hardware and gaskets. |
| 7 | Copper Braided Flexibles (R-Y-B-N) for termination ends, adequately sized for system rating. |
| 8 | Adapter Box, IP66 Outdoor type, for end termination housing. |
| 9 | Bus Duct Phase Crossover / Transposition Unit, Indoor type. (Optional) |
| 10 | Busuduct Tee unit |
| 11 | Supply, fabrication and Installation of hot dip galvanised structural steel items for bus duct support system. |
| 12 | Supply of Factory-Fabricated Perforated Hot-Dip Galvanized Iron (GI) Cable Tray, size 300mm (W) x 50mm (H), fabricated from 2.0mm thick Mild Steel sheet, hot-dip galvanized after fabrication as per IS 2629 / ISO 1461 (min. 65-85 microns zinc coating). Item to include all necessary matching GI coupler plates, hot-dip galvanized splice bolts, nuts, and washers for complete assembly. |
| 13 | Supply of Factory-Fabricated Perforated Hot-Dip Galvanized Iron (GI) Cable Tray with cover, size 75 mm (W) x 25mm (H), fabricated from 1.6 mm thick Mild Steel sheet, hot-dip galvanized (including cover) after fabrication as per IS 2629 / ISO 1461 (min. 65-85 microns zinc coating). Item to include all necessary matching GI coupler plates, hot-dip galvanized splice bolts, nuts, and washers for complete assembly. |
| 14 | Supply, laying, testing, and commissioning of 1.1 kV grade, 24 Core x 0.75 sq.mm. Control Cable, with stranded copper conductors, PVC insulated, cores numbered/color-coded, laid up with an extruded PVC inner sheath, armored with galvanized steel wire, and overall outer sheathed with Flame Retardant Low Smoke & Halogen (FRLH) PVC compound, conforming to IS 1554 (Part 1) / IS 7098 (Part 1). |
| 15 | Supply, laying, testing, and commissioning of 1.1 kV grade, 4 Core x 2.5 sq.mm. Power Cable, with stranded copper conductors, XLPE insulated, cores color-coded, laid up with an extruded PVC inner sheath, armored with galvanized steel wire, and overall outer sheathed with Flame Retardant Low Smoke & Halogen (FRLH) PVC compound conforming to Type ST2 category, as per IS 7098 (Part 1). |
| 16 | Supply and execution of end-termination for 1.1 kV, 24 Core x 0.75 sq.mm. armored copper control cable. Item to include heavy-duty nickel-plated brass double compression cable glands conforming to IS 2147 / BS 6121, thick-walled fire-retardant PVC outer shrouds, insulated tinned copper crimping lugs conforming to IS 2309, numbered PVC interlocking ferrules (printed) for core identification, and all related consumables like insulation tape and cable ties. |
| 17 | Supply and execution of end-termination for 1.1 kV, 4 Core x 2.5 sq.mm. armored copper power cable. Item to include heavy-duty nickel-plated brass double compression cable glands conforming to IS 2147 / BS 6121, heavy-duty tinned copper crimping lugs of appropriate sizing, and all related consumables. |
| 18 | Supply, fabrication, assembly, and installation of Mild Steel (MS) structural supports for cable trays (including trapeze hangers, cantilever brackets, ceiling pendants, and floor-mounted frames). Fabricated using standard MS channels, angles, flats, or unistrut profiles conforming to IS 2062. Scope includes site shifting, cutting, drilling, welding conforming to IS 816, anchoring to concrete slabs/walls using heavy-duty mechanical expansion fastners/anchor bolts, and application of one coat of red oxide zinc-chromate primer followed by two coats of synthetic enamel finish paint of approved shade Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender