Tender For Providing And Laying Of Drinking Water Supply Line At Of Fdl Bhuriwala Of 127 Bn Bsf Under Shq Bsf Kupwara
Tender Value
5.53 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
4 days left
EMD
11080
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of Drinking Water Supply Line At Of Fdl Bhuriwala Of 127 Bn Bsf Under Shq Bsf Kupwara
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 2 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 3 | Providing and fixing Polyethylene- Aluminium- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couplers & connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge : External work 2532 (32 mm OD ) pipe. |
| 4 | Providing and fixing Polyethylene- Aluminium- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couplers & connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge : External work 3240 (40 mm OD ) pipe. |
| 5 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 32 mm dia. nominal bore |
| 6 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32mm nominal bore |
| 9 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore |
| 10 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 32 mm nominal bore |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 12 | Providing and fixing HDPE pipes, having thermal stability for hot & cold water supply including all HDPE Pipe fittings plain & brass threaded fittings This includes jointing of pipes & fittings including jointing with HDPE Union, Tee, Elbow and air release valve wherever required/ as per requirement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 25 mm nominal dia Pipes |
| 13 | High prssure Triple Piston water pump set powered with diesel engine of total head 200 meters with base frame,valves,fittings,base frame with trolly wheel, Filled with engine oil and neceesary fitting for suction & delivery pipe,control valve, pully,Foot valve etc and all standard accessories complete as per general specfications.Pump size not less than 1.25''(Input) x 2.5'' (Out put),Head range not less than 150m to 200m as approved by Engineer-in-charge.9 HP capacity Engine Make-Kirlosker,Ground force,Crompton,President or equivalent |
| 14 | Add GST Modified factor @ (1-0.973=0.027) on Sr no. 1.01 to 1.11 |
| 15 | Add cost index @ 28.97% on Sr No. 1.01 to 1.11 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender