Tender For Up-Gradation Of Arcs Office Vijaypur Block: Vijaypur
Tender Value
27 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
2 days left
EMD
54000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Up-Gradation Of Arcs Office Vijaypur Block: Vijaypur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for oundations, drains, pipes, cables etc. (notexceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Providing and Laying of River Bed Material (R.B.M)/ Nallah bed Material (N.B.M)including spreading, consolidation complete in all respect including Loading, unloadingand carriage complete ( to be quoted by Contractor ) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with FPS bricks of class designation 75 in foundation and plinth in 1 cement: 4 fine sand mortar |
| 7 | Extra for brick work in superstructure above plinth level upto floor V level. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): sal wood |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per irection of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second Class Deodar wood |
| 10 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spirals tair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Centring and shuttering including strutting, propping etc and removal of the formwork for foundation |
| 14 | Centring and shuttering including strutting, propping etc and removal of the formwork for plinthrin |
| 15 | Centring and shuttering including strutting, propping etc and removal of the formwork for soffit |
| 16 | Edges of slab, Toilet, Septic tank |
| 17 | Reinforcement for RCC work including straightening, cutting, bending, placiing in position and binding all complete |
| 18 | 6mm C.sand plaster in ceiling 1:3 mix: Sarpanch room, Pantry, Secy room, meeting hall, computer room, corridor, toilet, ver./entrance |
| 19 | 12mm thick cement plaster of 1cement:6 fine sand mix: Sarpanch room, Pantry, Secy room, meeting hall, computer room, corridor, toilet, ver./entrance, deductions, Toilet D, Window W |
| 20 | 15 mm thick cement plaster of 1 cement: 6 fine sand mix: Externally, Window W, V |
| 21 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 50% of 5871.25sqm |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, |
| 24 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble. |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT Pillar cock. |
| 27 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15 mm nominal outer dia pipes. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 20 mm nominal outer dia pipes. |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 25 mm nominal outer dia pipes. |
| 31 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacture (two or more coats) and of required shade and colour on new work. |
| 32 | Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade on new work (two or more coats) |
| 33 | Making plinth protection 50 mm thick of c.conc. 1 cement: 3 coarse sand: 6 graded crushed agg. 20 mm nominal size over bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 35 | Providing and fixing short nose bib cock of approved quality 15 mm nominal bore |
| 36 | Fixing and supplying of electric motor (to be paid as per actual) |
| 37 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diameter |
| 38 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diameter |
| 39 | Providing and fixing angle valve etc complete |
| 40 | Honey-comb brick work 10/11.4 cm thick with common burnt clay (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor five level in cement mortar 1:4 |
| 41 | Constructing soak pit 1.20x1.20x1.20 filled with brick bats including SW drain pipe 100 mm diameter and 1.20m long complete as per standard design |
| 42 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 44 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete |
| 45 | Mirror of superior make glass 60x45 cm 4mm thick |
| 46 | P/f of Water motor of 1HP capacity ( Basic series Crompton ) incl. all necessary fixtures |
| 47 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm with Bowel depth 200mm |
| 48 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 49 | Lettering with black japan paint of approved barndand manufacture per letter cm height |
| 50 | Dismatling and demolishing of old structure by manual means inculding stacking of servicable material and carriage of unservicable material as directed by higher athourity |
| 51 | Carriage of material Sand (5 km) |
| 52 | Carriage of material Bajri (5 km) |
| 53 | Carriage of material Brick (5 km) |
| 54 | CIB with granite plate etc complete |
| 55 | Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 56 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 25 mm |
| 57 | Providing and fixing of towel rod |
| 58 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete flexible |
| 59 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 mm |
| 60 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete. : |
| 61 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete.. :150x10 mm |
| 62 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992with necessary screws etc. complete :125 mm |
| 63 | Providing and fixing bright finished brass hanging type floor door stopper withnecessary screws, etc. complete |
| 64 | Providing and fixing 15 w electric bulb |
| 65 | Providing and fixing electric fan |
| 66 | Providing and fixing bright finished brass hanging type floor door stopper withnecessary screws, etc. complete |
| 67 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 68 | Wiring for power point Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender