Tender For Repair Of Various Civil Work Alongwith Other Allied Work At Sewer Treatment Plant Raipur Kalan .U.T. Chandigarh. (Ch. To 2215 Non Plan).
Tender Value
4.73 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
4 days left
EMD
9468
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Various Civil Work Alongwith Other Allied Work At Sewer Treatment Plant Raipur Kalan .U.T. Chandigarh. (Ch. To 2215 Non Plan).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge. 2.8 |
| 2 | All kinds of soil. DSR 2.8.1 |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 2.10 |
| 4 | All kinds of soil. DSR 2.10.1 |
| 5 | Pipes, cables etc. not exceeding 80 mm dia. DSR 2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia DSR 2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level DSR 4.1 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 4.1.3 |
| 9 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4.1.8 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 13 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels DSR 8.2 |
| 15 | Granite of any colour and shade DSR 8.2.2 |
| 16 | Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 17 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge. DSR 8.3 |
| 18 | Granite work DSR 8.3.2 |
| 19 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. DSR 8.5 |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge DSR 11.48. |
| 22 | Size of Tile 600x600 mm DSR 11.48.2 |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved of brand & manugacturer, in all colours and shades,laid with cement based high polymer modified quick set tile adhesive( water based) conforming to IS:15477, in average 6 mm thickness, including grouthing of joints ( Payment for grouting of joints to be made separately) DSR 11.49 |
| 24 | Size of Tile 600x600 mm DSR 11.49.2 |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. DSR 11.56 |
| 26 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. DSR 11.56.1 |
| 27 | 12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7 |
| 28 | 1:4 (1 cement: 4 fine sand)DSR 13.7.2 |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : DSR 13.62 |
| 30 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 32 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. DSR 14.1 |
| 33 | With cement mortar 1:4 (1 cement : 4 fine sand) DSR 14.1.1 |
| 34 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: DSR 14.5 |
| 35 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2 |
| 36 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR 15.60 |
| 37 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 38 | W.C. pan with ISI marked white solid plastic seat and lid |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 40 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 42 | 32 mm dia : DSR 17.28.1.1 |
| 43 | Providing and fixing soil, waste and vent pipes :DSR 17.35.1 |
| 44 | 100 mm dia DSR 17.35.1 |
| 45 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2 |
| 46 | 75mm diameter : DSR 17.35.2 |
| 47 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.2.2 |
| 48 | Providing and fixing plain bend of required degree DSR 17.39 |
| 49 | 100 mm dia DSR 17.39.1 |
| 50 | Sand cast iron S&S as per IS : 3989 DSR 17.39.1.2 |
| 51 | 75 mm dia DSR 17.39.2 |
| 52 | Sand cast iron S&S as per IS - 3989 DSR 17.39.2.2 |
| 53 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 54 | 100 mm dia DSR 17.40.1 |
| 55 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 56 | 75mm diameter :DSR 17.40.2 |
| 57 | Sand cast iron S&S as per IS - 3989 DSR 17.40.2.2 |
| 58 | Providing and fixing single equal plain junction of required degree :DSR 17.44 |
| 59 | 100 mm DSR 17.44.1 |
| 60 | Sand cast iron S&S as per IS - 3989 DSR 17.44.1.2 |
| 61 | 75 mm DSR 17.44.2 |
| 62 | Sand cast iron S&S as per IS - 3989 DSR 17.44.2.2 |
| 63 | Providing and fixing terminal guard: DSR 17.56 |
| 64 | 100 mm DSR 17.56.1 |
| 65 | Sand cast iron S&S as per IS - 3989 DSR 17.56.1.2 |
| 66 | 75 mm DSR 17.56.2 |
| 67 | Sand cast iron S&S as per IS - 3989 DSR 17.56.2.2 |
| 68 | Providing and fixing collar : DSR 17.57 |
| 69 | 100 mm DSR 17.57.1 |
| 70 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 71 | 75 mm DSR 17.57.2 |
| 72 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 73 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : DSR 17.58 |
| 74 | 100 mm DSR 17.58.1 |
| 75 | 75 mm DSR 17.58.2 |
| 76 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : DSR 17.59 |
| 77 | 100 mm dia. DSR 17.59.1 |
| 78 | 75 mm dia. DSR 17.59.2 |
| 79 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. DSR 17.60 |
| 80 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 81 | Sand Cast Iron S&S as per IS- 3989 DSR17.60.2.1 |
| 82 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 83 | Internal Work - Exposed on Wall |
| 84 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 85 | 25 mm dia nominal bore DSR 18.10.3 |
| 86 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 87 | 15 mm dia nominal bore DSR 18.11.1 |
| 88 | 20 mm dia nominal bore DSR 18.11.2 |
| 89 | Providing and fixing of forged brass / GM Gate Valve |
| 90 | size 25mm i/d DSR 18.17 |
| 91 | size 20mm i/d DSR 18.17A |
| 92 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :DSR 18.18 |
| 93 | 20 mm dia nominal bore DSR 18.18.2 |
| 94 | 25 mm dia nominal bore DSR 18.18.3 |
| 95 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 96 | 45 cm length : DSR 18.21.2 |
| 97 | 15 mm nominal bore : DSR 18.21.2.1 |
| 98 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 99 | 20 mm nominal bore : DSR 18.46.2 |
| 100 | 25 mm nominal bore : DSR 18.46.3 |
| 101 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 102 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 103 | 15 mm nominal bore. DSR 18.49.1 |
| 104 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51.1 |
| 105 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53 |
| 106 | 15 mm nominal bore. DSR 18.53.1 |
| 107 | Providing and fixing of C.P. Brass Extension Nipple Size 15 mm x 50 mm of approved make and quality as per direction of EIC DSR 18.53A |
| 108 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 109 | With F.P.S. bricks : DSR 18.76.1 |
| 110 | Cutting holes up to 15 x 15 cm in R.C.C. floor and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof . DSR 18.77 |
| 111 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 112 | 100x100 mm size P type DSR 19.4.1 |
| 113 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 114 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 21\\" x 8\\" of approved make Jayana |
| 115 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board complete in all respect of approved make |
| 116 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 117 | Providing & Fixing Table Top Wash Basin Size 550 x 400 x 140 mm Make Cera model Calburt (S2020137) complete with CP Waste or equivalent in the same range of AOR |
| 118 | Providing and fixing of Anglular stop cock, With Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15053PM |
| 119 | Providing and fixing of Bib Tap with Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15037PM or equivalent in the same range of AOR |
| 120 | P/F of chinaware Rimless, Blind Installation Wall Hung WC In White Matt With PP Soft Close Slim Seat Cover, Hinges And Accessories Set, Size: 375x520x400 mm make Jaquar Model SLS-WHT-6953BIPPSM or equivalent in the same range of AOR |
| 121 | Providing and fixing of Single Piece Slim Concealed Cistern Body with Instalation Kit & S-Type Drain Pipe Connection Set For Wall Hung WC (Without Flush Control Plate) Make Jaquar Model JCS-WHT-2400S |
| 122 | Providing and fixing of Control Plate Kubix Make Jaquar Model JCP-CHR-352415 |
| 123 | Providing and fixing Single Lever Basin Mixer Without Popup Waste with 450mm Long Braided Hoses Make Jaquar range Opal Prime Model OPP-CHR-15011BPM or equivalent in the same range of AOR |
| 124 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent in the same range of AOR |
| 125 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar range Continental Model ACN-1151N or equivalent in the same range of AOR |
| 126 | Providing & Fixing CP Soap Dispenser make jaquar Continental 1135N |
| 127 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent in the same range of AOR |
| 128 | Providing and fixing of CP sink Waste for S.S Sink make Paryag,Cera or equilent. |
| 129 | Providing and fixing of Gun metal peat valve ISI Marked |
| 130 | 15 mm dia nominal bore |
| 131 | Providing and fixing HCI Cover with frame for GT & IC of approved make |
| 132 | Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect make viking |
| 133 | Providing and fixing botle trap 32 mm size with 300 mm and 190 mm long wall connection pipes and wall flange Complete in all respect make as approved by EIC. |
| 134 | Providing and fixing of C.P. towel ring make jainko, Viking or equivalent complete in all respect |
| 135 | Providing and fixing of C.P. soap dish of make Viking, jainko, Cera or equivalent complete in all respects |
| 136 | Providing and fixing of CP Waste for Basin of approved make viking, CERA, Jainco, Viking or equivalent. |
| 137 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender