Tender For Community Sanitary Complex Near Singhasan Mata Mandir / Yatra Langar Sanyas Pyt Gulabgarh Block Paddar.
Tender Value
3 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
2 days left
EMD
6000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Community Sanitary Complex Near Singhasan Mata Mandir / Yatra Langar Sanyas Pyt Gulabgarh Block Paddar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | RANDOM RUBBLE MASONRYRandom Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases andspiral stair cases upto five level including curing but excluding the cost of centring,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 10 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) OUTSIDE |
| 11 | 12 mm Cement plaster mix: 1 : 6 ( 1 cement : 6 fine sand) INSIDE |
| 12 | Soling of stone incl. Cost of stone. |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 15 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butt hingesbright finished of required size with necessary screws.Second class Kail wood30mm |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre,two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade.Two or more coats on new Work. |
| 19 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 Fine Sand) |
| 20 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.19.3.2 Internal work concealed fixing with pipes clamps 1.00 meter spacing including cutting chases and making good the wall etc.15 mm |
| 22 | Providing and Fixing PVC pipes all complete Job 100MM |
| 23 | Providing and Fixing PVC pipes all complete Job 75MM |
| 24 | Providing and Fixing PVC Bends all complete Job |
| 25 | Providing and Fixing PVC P TRAP all complete Job |
| 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 28 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever required : White VitreousChina Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 29 | Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings |
| 30 | Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, includingflush pipe with manually controlled device (handle lever), conforming to IS:7231,with all fittings and fixtures complete, including cutting and making good the wallsand floors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C wastefittings complete:Flexible pipe.40 mm dia |
| 32 | Providing and fixing PTMT grating of approved quality and colour. 19.49.1 Circulartype 100 mm dia |
| 33 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standarddesign and of approved make conforming to IS : 8931 |
| 34 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approvedmake and quality as per direction of Engineer-in- charge |
| 35 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collarsand bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 36 | Providing and fixing 15 mm nominal bore PTMT bib cock ofapproved quality conforming to IS : 8931 |
| 37 | P/F CIB |
| 38 | Carriage of Bricks at an average distance of 200 km BY MT |
| 39 | Carriage of sand at an average distance of 2 km BY MT |
| 40 | Carriage of COARSE AGG at an average distance of 15 KM MT |
| 41 | Carriage of Stone at an average distance of 2 km by MT . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender