Tender For Provn Of Parking Shed For Four Wheelers And Two Wheelers Adjacent To C Gate & Provn Of Aluminium Partition Wall In The Verandah At Bldg No T-34 (Fs Sec) Hq 11 Corps C Under Ge West Jrc
Tender Value
4.72 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
13 days left
EMD
9440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Shed For Four Wheelers And Two Wheelers Adjacent To C Gate & Provn Of Aluminium Partition Wall In The Verandah At Bldg No T-34 (Fs Sec) Hq 11 Corps C Under Ge West Jrc
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 2 | Removal of surplus soil to a distance not exceeding 50 mtr away & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 3 | M&L for Cement Concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall with self tapping screws complete as as specified and directed. |
| 6 | M&L preparation of new steel surface and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed. |
| 7 | Material and labour for brocken bricks Hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 8 | M&L machine pressed precast coloured concrete coloured interlocking paver blocks any shape and size confirming of IS 15658: 2006 of 60mm thick, M-35 laid and jointed with grey cement and pigment complete all as specified and directed. |
| 9 | M&L for 25mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 10 | S&F for powder coated (thickness of powder coating not less than 50 micron) aluminium work for doors, windows & ventilators and partitions (Fixed portions) minimum thickness 2mm of aluminium section with extrufed built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed. |
| 11 | S&F for powder coated (thickness of powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 12 | S&F Aluminium composite sheet panels 4mm thick including necessary joining cleats, glazing clips, rubber neoprene packing, for fillingg in frames of partitions and doors including all necessary fittings etc complete all as specified and directed. |
| 13 | S&F sheet glass 5.50 mm thick ordinary quality to be fixed in aluminium frame work in square exc 0.5 sqm in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender