Tender For Repair / Maintenance Of Joinery, Plumbing, Sanitary And Misc B/R Work For Carriappa And Barki Coy At Aec Trg College And Centre Pachmarhi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Joinery, Plumbing, Sanitary And Misc B/R Work For Carriappa And Barki Coy At Aec Trg College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | S&F including taking down medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing, complete all as specified and directed by Engineer-in-charge. |
| 2 | S&F including taking down medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing, complete all as specified and directed by Engineer-in-charge. |
| 3 | S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. |
| 4 | S&F in repair pillar taps, 15 mm bore cast copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge. |
| 5 | S&F in repair stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed by Engineer-in-charge. |
| 6 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed by Engineer-in-charge. |
| 7 | S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engineer-in-charge. |
| 8 | S & F including dismantling rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity including dismantling of existing water tank of any description, complete all as specified in SSR Part I and directed by Engineer-in-charge. |
| 9 | S & F including dismantling rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs capacity including dismantling of existing water tank of any description, complete all as specified in SSR Part I complete all as specified and directed by Engineer-in-charge. |
| 10 | S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed by Engineer-in-charge. |
| 11 | S & F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engineer-in-charge. |
| 12 | S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed by Engineer-in-charge. |
| 13 | S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed by Engineer-in-charge. |
| 14 | S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as specified and directed by Engineer-in-charge. |
| 15 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed by Engineer-in-charge. |
| 16 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge. |
| 17 | S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed by Engineer-in-charge.Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc. |
| 18 | Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe,urinal spreader, grating and Union for discharge pipe complete all as specified and directed by Engineer-in-charge. |
| 19 | S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm, including waste coupling & waste pipe complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F in repair PVC flexible waste pipe with socket fixed with sink/ WHB waste coupling of 32 mm dia complete all as specified and directed by Engineer-in-charge. |
| 21 | S & F in repair PVC connection 15x450mm size complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed by Engineer-in-charge. |
| 23 | Taking down shutter of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-charge. |
| 24 | Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 sq.m but n.exc 4 Sqm each and removing from the site complete all as specified and directed by Engineer-in-charge. |
| 25 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge. |
| 26 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed by Engineer-in-charge. |
| 27 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed by Engineer-in-charge. |
| 28 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed by Engineer-in-charge. |
| 29 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed by Engineer-in-charge. |
| 30 | S&F 2nd class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, complete all as specified and directed by Engineer-in-charge. |
| 31 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F 125 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge. |
| 36 | S&F 150 mm size aluminium handles,cast type,anodised all as directed. |
| 37 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed by Engineer-in-charge. |
| 38 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed by Engineer-in-charge. |
| 40 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantling Asbestos cement sheet (corrugated, semi corrugated etc) in roof covering complete all as specified and directed by Engineer-in-charge. |
| 41 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified including dismantling Asbestos cement sheet ( corrugated, semi corrugated etc) in roof covering complete all as specified and directed by Engineer-in-charge. |
| 42 | dismantling timber scantling 40 sqcm and over in section, in any position complete all as specified and directed by Engineer-in-charge. |
| 43 | S&F for MS framed works as in trusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried omplete all as specified and as directed.Fe-410 gd 250 complete all as specified and directed by Engineer-in-charge. |
| 44 | M & L exposed metal frame ceiling with 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge. |
| 45 | M&L glazed ceramic colour tiles in vertical surfaces 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) & Dismantling floor hearth or wall tilling and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 46 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) & dismantling floor hearth or wall tilling and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 47 | Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specified and directed by Engineer-in-charge. |
| 48 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, mass concrete, sub base surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed by Engineer-in-charge. |
| 49 | M&L for Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:6) including Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-charge. |
| 50 | M & L rendering 10mm thick on fair face of brickwork or concrete surfaces in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 51 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished fair and even including Taking down cement plaster on brick/block wall etc including racking out joints hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-charge. |
| 52 | M & L applying two coats of cement based paint on wall surface including preparation of surfaces, complete all as specified and directed by Engineer-in-charge. |
| 53 | M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed by Engineer-in-charge. |
| 54 | M & L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth of steel surfaces at any height and applying two coats of synthetic enamel paints over a priming coat of redoxide etc complete all as specified and directed by Engineer-in-charge. |
| 55 | Material & labour for complete removal and applying two or more coats of 100% premium acrylic emulsion paint light / dark having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 on old/new surfaces of wall, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 ltr/sqm complete all as specified and directed by Engineer-in-charge. |
| 56 | M&L preparation of old/new decorated surfaces of wall and applying two coat of oil bound distemper including filling of minor nail hole with wall putty complete all as specified and directed by Engineer-in-charge. |
| 57 | M&L preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including filling of minor nail hole with wall putty complete all as specified and directed by Engineer-in-charge. |
| 58 | M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 59 | M & L preparation of old surfaces of any description not otherwise described over 10 cm width or girth of steel surfaces/ roof sheet at any height and applying one coat of synthetic enamel paints complete all as specified and directed by Engineer-in-charge. |
| 60 | M & L preparation of old wood surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed by Engineer-in-charge. |
| 61 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 62 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge. |
| 63 | M&L Granite 18-20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown complete all as specified and directed by Engineer-in-charge. |
| 64 | M&L vitrified tiles 8-10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) & dismantling floor hearth or wall tilling and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 65 | Supply & Fix in repairs ( ISI Marked) white coloured Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge. |
| 66 | S&F in repairs sheet glass shelf 5.5mm thick with aluminium bracket and railing 60cm long and width 12.5cm as per sample complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F in repair health faucet 15 mm dia with flexible pipe of 1.25m length including abs wall hook for EWC complete all as specified and directed by Engineer-in-charge. |
| 68 | S & F 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer-in-charge. |
| 69 | S & F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and directed by Engineer-in-charge. |
| 70 | S & F in repair 25mm dia Stainless steel curtain rod of 1 mm thick fancy type fixed with modern bracket & doms design & sample approved by Engr -in Charge complete all as specified and directed by Engineer-in-charge. |
| 71 | S & F in repairs of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed by Engineer-in-charge. |
| 72 | S & F of CPVC brass elbow (3/4\\" X ½\\") for 20 mm outer dia CPVC pipe complete all as specified and directed by Engineer-in-charge. |
| 73 | S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 20 mm outer dia pipe complete all as specified and directed by Engineer-in-charge. |
| 74 | S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls incluidng clamping complete all as specified and directed by Engineer-in-charge. |
| 75 | S & F in repair 75 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed by Engineer-in-charge. |
| 76 | S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender