Tender For Welcome Maintenance Of Offrs Md Accn At Aec Trg College And Centre Pachmarhi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
21 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Offrs Md Accn At Aec Trg College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of the old surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-charge. |
| 2 | M & L for preparation of the old surfaces of walls and applying two coat of oil emulsion distemper over 1mm thick wall care putty complete all as specified and directed by Engineer-in-charge. |
| 3 | M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 4 | M & L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 5 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 6 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 7 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 8 | M & L for rendering 10mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 9 | M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed by Engineer-in-charge. |
| 10 | Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 11 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 13 | M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:4 complete all as specified and directed by Engineer-in-charge. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar ccomplete all as specified and directed by Engineer-in-charge. |
| 15 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and directed by Engineer-in-charge. |
| 16 | M&L for suspended false ceilling comprising of 4 mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.complete all as specified and directed by Engineer-in-charge. |
| 17 | Taking down Chowkhats or frames exc 1.5 sqm but not exc. 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge. |
| 18 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and directed by Engineer-in-charge. |
| 19 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm, complete all as specified and directed by Engineer-in-charge. |
| 21 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge. |
| 22 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-charge. |
| 23 | Hacking out old glass (any thickness,size,quality or description)from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge. |
| 24 | Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. |
| 25 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc complete all as specified and directed by Engineer-in-charge. |
| 26 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge. |
| 27 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 29 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 30 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed by Engineer-in-charge.ted. |
| 31 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F 500 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed by Engineer-in-charge. |
| 35 | S & F in repairs bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge. |
| 36 | S & F in repairs 15mm dia stop valves / angle cock fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge. |
| 37 | S & F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 38 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 39 | Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed by Engineer-in-charge. |
| 40 | S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed by Engineer-in-charge. |
| 41 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed by Engineer-in-charge. |
| 42 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed by Engineer-in-charge. |
| 43 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed by Engineer-in-charge. |
| 44 | S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 45 | S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge. |
| 46 | S&F repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed by Engineer-in-charge. |
| 47 | S & F in repairs Health faucet (ABS Body) mild steel CP 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified and directed by Engineer-in-charge. |
| 48 | S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces, complete all as specified and directed by Engineer-in-charge. |
| 49 | S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc complete all as specified and directed by Engineer-in-charge. |
| 50 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-charge. |
| 51 | S&F in repair C.P. grating 100mm square/round with or without hole complete all as specified and directed by Engineer-in-charge. |
| 52 | S&F in repair PVC waste pipe for wash hand basin/shink etc, 32mm dia and 80 cm long plain pipe, complete all as specified and directed by Engineer-in-charge. |
| 53 | Cleaning and removing all scale and dirt etc from tanks exc 250 L but n exc 500 L and from mouthes of circulating pipes etc complete all as specified and directed by Engineer-in-charge. |
| 54 | Cleaning and removing all scale and dirt etc from tanks exc 500 L but n exc 1000 L and from mouthes of circulating pipes etc complete all as specified and directed by Engineer-in-charge. |
| 55 | S&F in repair of cabinet mirror of selected quality glass, mounted pvc board including shelf assembly, complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender