Tender For Augumentation Of Gundurijhara Pws In Kanteikolia Gp Under Kishorenagar Block In Anugola District.
Tender Value
19.55 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
10 days left
EMD
20000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augumentation Of Gundurijhara Pws In Kanteikolia Gp Under Kishorenagar Block In Anugola District.
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION PUMP HOUSE : Earth work in excavation of foundation in all kinds soil within initial lead of 50mts.& lift of 1.50mts. including dressing and levelling the bed etc.complete. |
| 2 | Filling foundation & plinth with sand including cost of all labour, materials, carriage, royality, watering and ramming etc. complete. |
| 3 | C.C.(1:3:6) in foundation using 4cm.size H.G.C.B. metal including cost of all labour, materials, carriage, royality, curing etc. complete. |
| 4 | Fly Ash Brick masonry in C.M.(1:6) in F&P including cost of all labour, materials, carriage, royality, etc. complete |
| 5 | Fly Ash Brick masonry in C.M.(1:6) in Super Structure including cost of all labour, materials, carriage, royality, etc. complete |
| 6 | Supplying all materials, labour T&P for R.C.C. works of M-25 grade with 20m and down grade size black hard granite (crusher broken) stone chips including hoisting and laying with cost conveyances and royality etc. complete as directed by the Engineer-in-charge. |
| 7 | Supplying all labour T&P and materials at site labour for M.S. reinforcement for RCC work including cutting, bending, binding & tying the grills and placing in position including cost, taxes & conveyance of tor steel and binding wire 18 to 20 gauge complete as per direction of Engineer-In-Charge. |
| 8 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting, cost of all labour, materials, T & P etc. complete. i.RCC Foundation |
| 9 | RCC Beam, Column |
| 10 | RCC Lintel |
| 11 | RCC Floor & Roof slab |
| 12 | Supplying all labour T&P and materials at site for 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard broken granite chips of approved quality & from approved quarry including watering etc. with cost, conveyance & royality etc. complete as directed by the Engineer-in-charge. |
| 13 | Supplying all labour & T&P materials for 16 mm thick cement plaster (1:6) over brick work including racking out joints with cost, conveyance and royalty charges of all materials to work site as directed by the Engineer-in-charge. |
| 14 | Supplying all labour & T&P materials for 6 mm thick cement plaster (1:4) to RCC surface finished smooth including closed deep chipping and slurry treatment with cost, conveyance and royalty charges of all materials to work site as directed by the Engineer-in-charge. |
| 15 | Supplying all labour & T&P materials for 12 mm thick cement plaster (1:6) to outer walls including cost, conveyance and royalty charges of all materials to work site as directed by the Engineer-in-charge. |
| 16 | Priming one coat with any approved primer to walls with approved shade over one coat of primer on new work to give including cost, conveyance etc. all complete as per direction of Engineer-In-Charge. |
| 17 | Weather Coat Paint two coats to walls with approved shade over one coat of primer on new work to give an even shade including cost, conveyance etc. all complete as per direction of Engineer-In-Charge. |
| 18 | Wall painting two coats with distemper paint of approved shade over primer on new work to give an even shade. |
| 19 | Supplying all material, labour, T&P & making M.S door & windows with frame & shutter & fitting, fixing the same including transportation cost to site. |
| 20 | Supplying all labour, T&P materials at site for painting two coats with enamel paint one coat with red oxide primer on steel surface including cost of all materials as per direction of Engineer-In-Charge. |
| 21 | Const. of Compound Wall : Earth work in excavation of foundation in all kind of soil with in initial lead of 50mt & initial lift of 1.50mt including dressing & levelling the bed etc. complete |
| 22 | Filling in foundation and plinth with sand including cost of all labour, materials, carriage, royalty, watering & ramming etc. complete. |
| 23 | CC (1:3:6) in foundation using 4 cm size HGCB granite Metal including all cost of conveyance and royalty of materials. |
| 24 | Fly Ash brick masonry in C:M. (1:6) in F&P including cost of all labour, materials, carriage, royalty, etc. Complete |
| 25 | Fly Ash brick masonry in C.M. (1:6) in Super structure including cost of all labour, materials, carriage, royalty, etc. Complete |
| 26 | Supplying all materials, labour T&P for R.C.C. works of M-20 grade with 20m and down grade size black hard granite (crusher broken) stone chips including hoisting and laying with cost conveyances and royality etc. complete as directed by the Engineer-in-charge. |
| 27 | Supplying all labour T&P and materials at site labour for M.S. reinforcement for RCC work including cutting, bending, binding & tying the grills and placing in position including cost, taxes & conveyance of tor steel and binding wire 18 to 20 gauge complete as per direction of Engineer-In-Charge. |
| 28 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting, cost of all labour, materials, T & P etc. complete. i.RCC Foundation |
| 29 | RCC Beam, Column |
| 30 | 16mm thick C.P. (1:6) to inner walls including cost of all labour, materials, carriage, royalty, curing and T&P etc. Complete. |
| 31 | Supplying all labour, T&P materials at site for weather coat two coats over a coat of primer on new work including cost, conveyance etc. all complete as per direction of Engineer-In-Charge. |
| 32 | Supplying all labour & T&P materials for priming one coat to new plastered surface including cost, conveyance etc. complete as directed by the Engineer-In-Charge. |
| 33 | Internal Electrification : Recessed wiring to light point / Exhaust fan point with 1.5 sqmm F.R. PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexibleconduct with 5Amp, 250V piano type switch ISI marked and celling rose ISI marked mounted on MS box having front backelite cover of suitable size M.S. Box with 1.0 sqmm F.R. PVC insulated single core multistrand copper conductor and earth wire including all accessories and connected as per direction of engineer-in-charge (Make of wire = Finolex / L&T / Anchore / Havels / V Guard) (Deducting the cost of S/F 100mm x 60mm M.S. Box with backlite cover - 1 no) i. Group A (1.1.1-1.24.2) up to 3 M |
| 34 | Group A (1.1.1-1.24.2) 4 M-5M |
| 35 | Group A (1.1.1-1.24.2) 3 M-4M |
| 36 | Recessed wiring to Fan point. i. Group A (1.1.1-1.24.2) 4M-5M |
| 37 | Supply and fixing of 16/ 18 SWG metal box of following sizes ( Normal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recesed conduct as required. i. 100mm x 100mm x 60mm deep (1.24.2) |
| 38 | 180mm x 100mm x 60mm deep (1.24.5) |
| 39 | 200mm x 250mm x 75mm deep (1.24.9) |
| 40 | Supply and fixing of 5 Amp Switch and 5Amp Socket outlet of ISI marked on existing board (1.25.1 + 1.25.4) |
| 41 | Supplying, providing all materials and labour T&P 3 Phase pilot lamp, with 3nos holder, switch, bulb on Iron Board front Bakelite sheet cover complete fitting. |
| 42 | S/F to 180 mm x 100 mm x 60mm deep (Normal size) in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15/16 Amp. Socket outlet 15/16 Amp. Piano type switch, connection, painting etc.as required (1.27) |
| 43 | Wiring of circuit/ sub-main along with earth wire with following sizes of pvc insulated single core multistrand copper conductor with ISI marked coforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6 mm in recessed PVC conduct as required (Make of wire = Finolex / L&T / Anchore. i. 2 x 1.5 sqmm + 1 x 1.0 sqmm (18.1) |
| 44 | 2 x 2.5 sqmm + 1 x 1.5 sqmm (18.2) |
| 45 | 2 x 4 sqmm + 1 x 1.5 sqmm (18.3) |
| 46 | 6 sqmm + 1 x 2.5 sqmm |
| 47 | Supplying, providing, fitting and fixing 100AMP Copper cable 9 socket with ranga soldering |
| 48 | Supply, installation, testing and commissioning of 100 AMP Porcelain kitkat fuse on M.S. Board with M.S. Clamp by drilling holes with other fixing materials complete with fuse links interconnections earting etc. as required as per direction of EIC. (Make Anchor/L&T/Havels) |
| 49 | Supply, installation, testing and commissioning of 32 AMP ΤΡΝ main switch (IS 13940 Part 3/1993) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. (Make Simens / HPL / Anchor /L&T/ Havels/ C&S/ RK) 2.15.2 |
| 50 | Supply, installation, testing and commissioning of 63 AMP TPN main switch (Sl.no. 1505, IS 13940 Part 3/1993) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. (Make Simens / HPL/ Anchor/ L&T/ Havels/ C&S/ RK) 2.15.2 |
| 51 | Supplying and fixing of batten holder of ISI marked including connection etc. instead of ceiling rose (1.29-1.28) |
| 52 | Earthing with G.I. earth pipe 3 meter long 40mm dia ISI marked including acessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. (3.2) |
| 53 | Providing & fixing 6 no SWG G.I. wire in recess for loop earthing as required (3.17) |
| 54 | Supply and fixing A/C Ceiling Fan with all acessories and connections without regulator (Make Havels celocity Sparks /Khaitan-maganet / Orient New breeze / Anchor- Rayal gold /Crompton Greaves -High breeze) i. 48\\" (1200mm) |
| 55 | Supply and fixing of strip fitting with colour end plate for 1 X 28 W T 5 tube with electronic ballast including tube (Make PAC / Bajaj /Philips (Type - STC - 128 HFE )) |
| 56 | Supply, installation, testing and commissioning of 24 watt Energy effcient T-5 street light fitting incl. fixing of 24 watt T-5 Lamps ( Make Bajaj / Havels) including fixing of bracket and all accessories as per direction of EIC. i. 2 x 24 watt Lamp |
| 57 | Supply and fixing of electfic step type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated single core multistrand copper conductor with earthing the regulator as required (1.38) |
| 58 | Supply, installation, testing and commissioning of CFL Bulb. i.18watt CFL Bulb. |
| 59 | 11 watt CFL Bulb. |
| 60 | Supplying and fixing of 63 AMP TPN Copper Bus Bar |
| 61 | Supplying and fixing of 100 AMP AMP ICTPN Main switch |
| 62 | Fitting and Fixing of Electrical Equipments for functioning of Vertical Pump |
| 63 | DISTRIBUTION SYSTEM : Suppying of all material, labour, T&P, welding rod, Gas etc for fabricating & welding different sizes of Gl pipes & specials. The rates are inclusive of fabrication of Gl bend/ Tee/ RS & offsets as per required angle & as per site condition including welding & jointing with GI flanges as & when required of sizes including earth work with priming one coat with red oxide primer & painting two coats at joints All the equipments are taken to site & welding by DC Generator set fitted at site etc complete as per direction of Engineer-in-charge. i.100 mm Gl pipe (Tata/ Jindal medium) |
| 64 | 80 mm Gl pipe (Tata/Jindal medium) |
| 65 | Pump & Motor : Supplying of centrifigual pump motor set suitable at reservoir including all taxes and carriage of materials and lowering of Submerssible pump set including all necessary connection etc. complete as per the direction of Engineer in charge with 100% Standby. i.5HP. |
| 66 | Supplying of Auto start three phase Auto Transformer Starter control panel for centrifigual pump as per ISI specification suitable for the for above variable speed submerssible pump set as above including installation and cost of all taxes etc. complete as per the direction of Engineer in charge. |
| 67 | Supplying of 6 sqmm. three core submerssible flat cable of reputed brand i.e. Finolex or Havels made with ISI marked including cost of all taxes and carriage etc. complete as per the direction of Engineer in charge. |
| 68 | Supply of 25sqmm 3 1/2 core Aluminium Armoured cable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender