Tender For Special Repair To Internal Road For Officer, Jco And Or Md Accn At Chindit Top, Rupa East And Certain Unit Under Ge Tenga
Tender Value
1.15 Crore
Estimated cost
Bid Submission
22 Sep 2026
2 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
siliguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Internal Road For Officer, Jco And Or Md Accn At Chindit Top, Rupa East And Certain Unit Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair cat eye solar reflective type of metal body alloy of size (100 mm x 100 mm x 20 mm) with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 2 | S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size (125 mm x 125 mm x 25 mm) (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed. |
| 3 | M & L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to (BS 3262-1989) with special applicator machine all as per manufacturers instruction complete all as specified and as directed. |
| 4 | Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 5 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c, as direction of Engineer-in-charge complete all as specified and as directed. |
| 6 | S&F for Polycarbonate Convex mirror (80 cm dia) with polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.50 mtr abobe ground surface and 60 cm below ground incl PCC foundation of size (30 x 30 x 60 cm) with PCC (1:3:6) type C1 bottom part of MS pipe welded with 5 mm thick (125 mm x 125 mm) MS plate for anchorage in PCC, MS pipe shall be painted stove enamelled paint over a coat of red oxide, incl necessary earthwork excavation in any soil, removed and disposal of soil complete all as specified and as directed.Make-3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked. |
| 7 | S&F for Heavy Duty speed bump of (500 mm length x 350 mm x 75 mm) height and made of plastic/rubber/fibre material with 2 nos high reflective reflectore moulded in PMMA and fixed with 4Nos nail and epoxy adhesive (base bumper & hole) on road surface complete all as specified and as directed by Engr-in-Charge as per manufactures specification. |
| 8 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed. |
| 9 | M&L PCC (1:2:4) type B2 using (40 mm graded aggregate) as in foundation, fillings, posts and mass,concrete complete all as specified and directed. |
| 10 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5kg per 10 sqm putting in premixed bituminius macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) and rolled to a uniform surface (Depth of pot hole exc 30mm) complete all as specified and as directed by Engr-in-charge. |
| 11 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweping with brooms and finally fanning the cleaned surfac with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 12 | Rolling and consolidation formation surface in cutting using Power roller exc 8 tonne and n exc 12 tonne complete all as specified and as directed. |
| 13 | Applying evenly a primming Tack coat with bitumenous primer at 10 Kg per 10 Sqm of Paving Bitumen complete all as specified and as directed. |
| 14 | M&L for permix bituminous, macadam (consolidated thickness 75 mm or less) laid/ rolled and compacted to required gradient and camber using 4% by weight of total mix binder content of paving bituman any penetration) complete all as specified and as directed. |
| 15 | M&L for preparation of bituminous top surfaces and apply a tack coat with paving bitumen of VG-10 @ 5 kg per 10 square meter complete all as specified and as directed. |
| 16 | M&L for Bitumenous premixed carpet, 40 mm thick (consolidated thickness) with 0.53 cu.m of stone chipping mixed with 29.20 kg binder, rolled and compacted to required camber and gradient complete all as specified and as directed. |
| 17 | M&L for Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and as directed. |
| 18 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 19 | M&L for cement concrete (1:4:8) type C-2 using 40mm graded crushed stone aggregates 75mm thick as in flooring, thick sub-base etc complete all as specified and as directed. |
| 20 | M&L for 50mm avg thickness sand filling / cushioning bed with necessary consolidation for bedding layer of tiles etc complete all as specified and as directed. |
| 21 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 22 | M&L for Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size conferming to (IS 15658-2006) of 80 mm thick M-40 Grade with grey cement and pigment complete all as specified and as directed. |
| 23 | M&L for cement concrete Type B-0 using 12.5 mm graded stone aggregate (Nominal mix in (1:2:4) in copings, benching and the like including weathering slightly rounded or chamfered angles as directed including necessary form work and finishig all exposed surfaces complete all as shown on drgs complete all as specified and as directed. |
| 24 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not 10 Sqm exc 400 Sqm and exc 50 mm and n exc 100 mm deep complete all as specified and as directed. |
| 25 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed. |
| 26 | M&L for two layers of 75 mm thick (compacted thickness) WBM with granite coarse aggregate of grading 2 (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 27 | M&L for preparing new black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 28 | M&L for Premix Bituminous macadam and Penetration, macadam 4%, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed. |
| 29 | M&l for Applying evenly a priming/tack coat with bituminous primer at 2.5 kg per 10 sq metre complete all as specified and as directed. |
| 30 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5 kg/10 sqm complete all as specified and as directed |
| 31 | M&L for 75 mm light wearing surfaces with moorum/ red bajri spread, rolled and consolidated to required gradient and camber complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender