Tender For Special Repair To Bldg No Pn-16 (A To D) And Pn-29 (A To D) Jco Md Accn At White Knight Enclave Under Ge Nagrota
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
18 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Pn-16 (A To D) And Pn-29 (A To D) Jco Md Accn At White Knight Enclave Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each but n exc 4 sqm and removing from site complete all as specified and directed. |
| 3 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided complete all as specified and directed. |
| 5 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed. |
| 7 | Dismantling steel sheeting, any gauge, thickness, including Nainital or similar pattern (plain or corrugated) in roof coverings including ridges, eaves etc complete all as specified and directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 9 | S&F Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 10 | S&F Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 11 | S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkhats, chemically pressure treated complete all as specified and directed. |
| 12 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | S&F powder coated aluminium frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), section weighing not less than 0.55 kg/m, including joining cleat for fixing with dash fasteners of required dia and size, including filling up gaps at junctions, ie top, bottoms and sides etc complete all as specified and directed. |
| 14 | S&F powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed. |
| 15 | S&F for sheet glass palin/coloured 3mm / 5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 16 | S & F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed. |
| 17 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 18 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 19 | S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 20 | S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | S&F 150mm long anodised aluminium handles, cast type complete all as specified and directed. |
| 22 | S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 23 | S&F for 20 to 25 mm dia stainless steel drapery curtain rod with brass /nickel chrom polish / designer lattos and brackets including taking out old pelmet with curtain rods complete all as specified and directed. |
| 24 | S&F 300 mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 25 | S& F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 26 | S & F for PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive, incl hasp and stable for locking purpose, etc as per direction of manufacture's specification and drawing complete all as specified and directed. |
| 27 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortor 1:6 etc, complete all as specified and directed. |
| 28 | M & L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound shall be measured paid separately) |
| 31 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | Supply only integral water proofing compound complete all as specified and directed. |
| 33 | M & L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant cement primer and over a coat of 2 to 3mm thick wall care putty complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 34 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 35 | M & L for preparing new plastered surface on ceiling and applying three coat of white wash complete all as specified and directed. |
| 36 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris putty complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 37 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 38 | M&L for three coat of white wash on old surface on ceiling including preparation of surface complete all as specified and directed. |
| 39 | M & L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) for levelling course in floors complete all as specified and directed. |
| 40 | M&L for scratch free vitrified light shade floor tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 41 | All as per Srl item no. 40 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and directed. |
| 42 | M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 43 | M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 44 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 45 | M & L for machine cut kota stone slab flooring 20 to 25mm thick (size not less than 550mm x 550mm) laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 46 | M & L for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick 1:4 CM backing coat on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and directed. |
| 47 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 48 | M&L for plain cement concrete 1:3:6, type B1( using 20mm graded crushed stone aggregate) 75mm thick as in plinth protection complete all as specified and directed. |
| 49 | Demolition of cement or lime concrete in any despription along with tarfelt treatment in sunken portion / roof and cement mortar bedding from roof removal rubbish out side MoD land complete all as specified and directed. |
| 50 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sunken portion, subbase, etc complete all as specified and directed. |
| 51 | M&L for water proofing treatment to sunken portition / roof etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed. |
| 52 | M&L for cement concrete terrazzo tile in roof size of 25cmx25cmx20mm, machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigment , including well polished and girinding , etc complete all as specified and directed. |
| 53 | S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and directed. |
| 54 | M&L in repairs PVC valve less, syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets and connection to pipe and fixing of chain and pull or lever complete all as specified and directed. |
| 55 | S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps, waste pipes, chain and plug etc complete all as specified and directed. |
| 56 | S & F in repairs PVC (SWR) nani trap / floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed. |
| 57 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 58 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 59 | S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 60 | S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 61 | S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls / floor or in trenches complete all as specified and directed. |
| 62 | S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls / floor or in trenches complete all as specified and directed. |
| 63 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 64 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed. |
| 65 | All as per Srl item no. 64 above but 20mm bore complete all as specified and directed. |
| 66 | S&F steel tubing medium grade, galvanized with all fitting such as bend, elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc for 15mm bore pipes complete all as specified and directed. |
| 67 | All as per Srl item no. 66 above but 20mm bore complete all as specified and directed. |
| 68 | S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 69 | S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle, screwed both end for iron pipes complete all as specified and directed. |
| 70 | S & F in repair swan neck pillar CP mixer suitable for wash hand basin complete all as specified and directed. |
| 71 | S&F in repair CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed. |
| 72 | S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed. |
| 73 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 74 | S& F in repair Rotational moulded Polyethylene trippled layer water storage tank 500 ltrs capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and dismantling water tank complete all as specified and directed. |
| 75 | M&L for Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams) complete all as specified and directed. |
| 76 | S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and directed. |
| 77 | M&L for stain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed.Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each. |
| 78 | S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed. |
| 79 | M & L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hookings ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, etc complete all as specified and directed. |
| 80 | M & L for formwork fair and finished surfaces to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc complete all as specified and directed. |
| 81 | M&L for Reinforced Cement Concrete M-25 using 20 mm graded crushed stone aggregate as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed. |
| 82 | Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete) and set in cement mortar complete all as specified and directed. |
| 83 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm bore pipes in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) after they are laid and tested complete all as specified and directed. |
| 84 | M&L for 150 mm bore salt glazed stone were (SGSW) drain pipe grade 'A' laid to slope in tranches and jointed in cement mortar (1:1) including necessary testing for ensuring teak proofing complete all as specified and directed. |
| 85 | Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified and directed. |
| 86 | M&L for plain cement concrete 1:4:8, type B2(using 40mm graded crushed stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed. |
| 87 | M&L for Cement concrete chequered tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) Incl 20mm thick screed or screed bedding in cement mortar 1:4 as in floors complete all as specified and directed. |
| 88 | S & F for precast cement concrete type B-1 (1:2:4) (20mm graded crushed stone aggregate) as in kerb and edging to road and footh path, etc including chamfered, weathering, throating etc and setting in CM (1:4) complete all as specified and as directed. |
| 89 | Supply and fixing GI frame snap grid frame work for for flase ceiling E board size 600 x 600mm x 6MM, inserted in GI/Alluminium frame as in celing main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed. |
| 90 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 91 | S & F 0.50mm thick (including coated thickness) Pre-colour, pre-profiled (Galvalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/ profile maker instruction complete all as specified and directed. |
| 92 | S & F pre - painted galvalume aluminium zinc coating plain sheeting 0.50 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,barge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed. |
| 93 | S & F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tank stand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and directed. |
| 94 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 95 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit all complete all as specified and directed. |
| 96 | Taking down ceiling fan/Exhaust fan/Geyser and deposited in MES Store complete all as specified and directed. |
| 97 | Taking down existing energy meters, keeping aside safely & deposited in MES Store, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 98 | Taking down existing energy meters, keeping aside safely & deposited in MES Store, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender