Tender For Construction of Warehouse For The Storage Of Evms And Vvpats At Keylong Distt. Lahul & Spiti (H.P.) .(Sh:- Construction Of Main Building Including W.S. & S.I And Septic Tank)
Tender Value
3.02 Crore
Estimated cost
Bid Submission
01 Sep 2026
2 days left
EMD
6.05 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lahul and Spiti → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Warehouse For The Storage Of Evms And Vvpats At Keylong Distt. Lahul & Spiti (H.P.) .(Sh:- Construction Of Main Building Including W.S. & S.I And Septic Tank)
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth upto all leads and lifts in pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto breaking with breaker any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth through all modes of transportation. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. The work shall be done as directed by the Engineer-in-Charge including carriage of material with in all leads and lifts, disposed materials to be neatly levelled including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 2 | Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry and all saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material within all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 3 | Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 4 | Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST.(i) In foundation,footings bases of columns etcetera for mass concrete. |
| 5 | (ii) In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels. |
| 6 | (iii)In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels |
| 7 | (iv) In columns, pillars,piers, abutments posts and struts square rectangular or polygonal in plan upto all floor level. |
| 8 | (V) Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level. |
| 9 | (VI)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 10 | (vii) Edges of slabs and breaks in floors and walls : Under 20 cm (twenty centimetre) wide . |
| 11 | Providing and laying reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix, excluding the cost of centering, shuttering, finishing including entire carriage of materials within all leads lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST.(i) All works upto plinth level. |
| 12 | (ii) All works above plinth level upto all floor level. |
| 13 | Providing and laying mechanically mixed and vibrated cement concrete for reinforced concrete in substructure in foundation and plinth reinforced cement concrete grade M-25 (M-Twenty five) design mix with minium cement contents 400(four hundred ) Killograme per Cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 804,806,807, 1202 and 1204 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 14 | Providing and laying HYSD steel bars Fe 500D (five hundred) made of SAIL/TISCO/ TATA/SHYAM/RINL steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding complete including the cost of binding wire complete in plinth upto all floor levels including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 15 | Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:4:8 (One cement: four sand : eight graded/crushed stone aggregate 40mm (forty millimetre) nominal size) as per specification and curing complete but including cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 16 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H(One vertical is to twenty Horigently) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 17 | Back filling behind abutment , wing walls and return walls, retairing wall complete as per drawings and technical specification Clause 1204.3.8. with Granular Material in 600 mm ( six hundred millimetre ) width including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 18 | Providing and laying damp proof course 38mm (Thirty eight milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 19 | Applying a coat of hot bitumen mexphalt 80/100 (Eighty oblique hunderd) or equavalent using 1.70 Kg (one decimal seven zero kilogramme) per square metre on damp proof course after cleaning the surface with a piece of colth lightly socked with kerosen oil including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 20 | 20 cm thick (Twenty centimetres )Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 .00 N/mm 2( Ten Newton per millimetres square) average compressive strength with Cement Mortar 1:4 (One cement: four sand) in super structure above plinth level up to all floor level in :ash brick (outer leaf ), including carriage of materials in all leads lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , other taxes imposed by the Government but excluding GST. |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) of class designation 7.5 in Cement Mortar 1:3 (One cement: three sand) and curing complete in super structure above plinth level upto all floor level including entire carriage of material with in all leads lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 22 | 23 thick Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in substructure up to plinth level in all shapes and sizes in :Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 23 | 23 thick Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor any level in all shapes and sizes in :Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 24 | Providing and fixing door frame of 2.5mm thick hollow steel frame members having single revate of size 100x50 mm and double revate of size 130 X 65mm made of galvanized sheet of zink coat 120 gramme per Square meter of appolo chaukhat / Tataa Pravesh/ or its equivalet. j The frame section should be cut to length and metre joint with corner bracket made of CRCA electroplated. The frame should be provided with 3 (three) number of M.S. powder coated 4\\" (four inch) butt hinges of 2 mm( two) millimetres thickness welded to frame and 6 (six) number of 1.2 mm( one point two) thick CRCA electroplated stiffeners should be welded to frame and 6 (six) number 8\\" (eight inch) MS holdfasts with spilt end tail welded to stiffeners plates and 1(One) number aldrop receiver. Each frame should be provided with 25x50 mm(twenty into fifty) millimtres tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat each primer complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 25 | Providing and fixing ECO-5000 ( Five thousand) Series Windows,ventilators frames and shutters fabricated from roll formed sections made of Galvanized steel colour coated / powder coated (Base steel as per 513\\"D\\" quality hot dip Galvanized as per IS 277 with Zinc of 120 gram/sqm (One hundred twenty gramme per square metres with total coated thickness of 0.72mm (zero point seven two) for outer frame and 0.58mm (zero point five eight) for other section elixr 3000( Three thousand) series/ NCL seccolor 5000 ( Five thousand) series/ Tata Praveshor its equivalent .Coated section should be with primer coat of epoxy primr of 5-7 (five -seven) micron thick finish apinted with polyster paint of 12-16 microns thick and black coated with alkyd backer of 5-7 (five -seven) microns, or powder coated with pure polyster powder up to 50-60 (fifty -sixty) micron thick. Section for frame should be of 98x50mm,(ninety eight into fifty) section for mullion should be of 46mmx70mm 0.58mm (forty six into seventy into zero point five eight)thickness, section for shutter frame should be of 46mmx46mmx0.58mm,( forty into forty six into zero five eight) millimetres section for fixed glass beed should be of 18mmx25mmx0.58mm (Eighteen into twenty five into zero point five eight)millimetres into twenty and section for fly mesh shutter frame should be 20mm x 40mmx0.58mm. (Twenty into forty into zero point five eight) millimetres frames and mesh shutter section 18mmx6mmx0.58mm (Eighteen into six into zero point five eight)millimetres should be cut to length and mitre joint with corner bracket made of polypropylene. Glass shutter should be mitre joint with corner bracket made of CRCA electroplated. Mullion section should be jointed with frame/mullion using nylon. Mullion cap Ethyl Propylene Diamine Monomer(EPDM) gasket should be used all arround glass in shutter between frame and glazed shutter and both sides of fixed glass. Rubber gasket should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter should be provided with MS powder coated friction hinges 1 set, High grade aluminium coated handles 1 number. Each mesh shutter should be provided with S.S. Pivot hinges 1 set. Sec-color make handle shall be provided per shutter. Window frame should be fixed to brick/concrete masonary by using nylon self-expanding caps and driving MS electroplated 80mm long screw into the caps through frames complete GLASS PANELS SHALL BE OF DOUBLE GLASS UNIT 6MM TOUGHENED KT SERIES & FIXED WINDOWS GLASS (OUTSIDE) + 12 MMAIRGAP+ 5 MM(INSIDE) CLEAR TOUGHENED GLASS OR EQUIVALENT TECHNICAL VALUES. THE GLASS SHALL BE WITHOUT ANY FLAWS, BUBBLES, SCRATCHES ETC including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Govt but excluding GST. |
| 26 | Providing and fixing ECO-5000 Series Windows mesh Tata Praveshor its equivalent . should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 (one hundred forty four) ) holes per square inch complete and carriage of material within all leads, lifts and other incidental charges complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 27 | Providing and fixing ECO-5000 Series Windows Grill should be provided with grill made of 10(ten) Millimetres square MS bars welded to at 150(one hundred fifty)millimetres centre to centre 6x 12 (six into twelve)millimetres MS flat. Total grill unit should be powder coated and fixed to window frame with screws completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 28 | Providing 40x5 (fourty into five) mm flat iron hold fast 40 (fourty) cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs andembedding in cement concrete block 30x10x15 cm (thirty into ten into fifteen )centimetres 1:3:6 mix (one cement : three coarse sand :six graded stone aggregate 20 (twenty ) mm nominal size) including carriage of materials in all leads lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 29 | Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size aaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 30 | Providing and fixing 200x10 (two hundred into ten) mm corrosion resistant AISI Grade stainless steel Tower bolts with necessary screws etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 31 | Providing and fixing 125mm (one hundred twenty five) mmillimetres corrosion resistant AISI Grade stainless steel handles with necessary screws etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 32 | Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 33 | Providing and fixing 35mm thich prelimanited slid core flush shutters (GREEN LAM or EQUIVALENT) conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters Stainless Steel butt hinges with necessary screws including carriage of materials in all leads and lifts and as per directions of the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 34 | Providing and fixing 19mm thick ( ninteen) milimetre made of Action tesa Green, Novapan, Kitply National, Archid ply thick terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet shall be of 8mm(Eight milimetre) thick ply and all the cut portions of shelves shall be finished with 6mm (six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12(Twelve) Millimetres thick hard wood edging. the shutters from out side shall be finished with 1(One) millimetres thick laminated sheet of approved shade includng piano hinges and magnetic catcher with all ascessories complete as per detail architectural drawing upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 35 | Providing and laying 6(six) mm thick stone polymer composit flooring of armstrong/ floorex of approved shade and sample including carriage of materials in all leads and lifts and as per directions of Engineer-in-Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 36 | Providing and laying Matt fnish Ceramic glazed floor tiles of grade IV of Joanson/nitco/orient bell with coving of size 300x600 mm of 1st quality conforming to IS : 15622 of approved make and colours laid over 12 mm (twelve mm) thick bed of cement mortar 1:3 (one cement:three coarse sand, Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kg/sqm) including pointing the joints with white cement and matching pigment etc.including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST |
| 37 | Providing and laying ceramix tile 300x600 mm in skirting base of cement 12mm mortar 1:3 (1cement : 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 38 | Providing and fixing 19 mm (ninteen mm) thick Granite stone with anti skid pattern of approved shade and sample gang saw cut, mirror polished, premoulded and prepolished, machine cut for riser and steps of stair ,kitchen platforms, vanity counters, and similar locations of required approved size, shade, colour and texture laid over 20 mm (twenty mm) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. including pointing the joints with white cement and matching pigment etc.including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 39 | Providing and laying Full body vitrified floor tiles 60 X 60 CM with anty skid pattern of (AGL/JOHNSON/ KHAJARIA/SIMPOLO TILES) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,and curing complete and carriage of materials in all leads lifts and as per directions of Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 40 | Providing and laying Full body vitrifiedtiles 60 X 60 CM with anty skid pattern of (AGL/JOHNSON/ KHAJARIA/SIMPOLO TILES) in skirting base of cement 12mm mortar 1:3 (1cement : 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of with water absorption less than 0.08% and conforming to IS: 15622, of approved make, colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,and curing complete and carriage of materials in all leads lifts and as per directions of Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 41 | Providing and laying 19mm thick 60x60 cm Red mandana Stone flooring laid over base of 20mm thick of cement mortar 1:4 (one cement: four sand) and joined with cement mortor 1:2 and jointed with grey cement slurry mixed with pigment to match the shade of the stone. The stone shall be fnished with rough polish so as not to be make it slipery and shall have wall mounted hand rail including rubbing and polishing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 42 | Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm (fourty mm) thick with 20 mm (twenty mm ) nominal size stone aggregate including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 43 | Providing and fixing GRC clading of Unistone/NTC tiles 10 mm (ten millimeter) thick of approved shade on R.C.C.surface side as on faces of Arches, masonry walls etc on 12mm thick cementmortar 1:3 (one cement: three sand) and jointed with cement slurry i/c scafolding etc as per approved drawing/pattern including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST.. |
| 44 | Providing and applying white cement based putty of average thickness 1 mm (one millimeters) of approved brand Birla white, Putty/ J.K. wall putty and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST.. |
| 45 | Wall painting with premium acrylic washable emulsion paint (NEROLAC / ASIAN) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 (Fifty) grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour .including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 46 | Finishing walls with all Weather Proof Exterior Emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. including applying additional coats wherever required to achieve even shade and colour .including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work of required shade on undecorated wall surface to give an even shade over and including of priming coat with primer of approaved brand and manufacture of paints Aqualac, Burger,Johnson & Johnson, Nichoson (J&N) Golden after thoroughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 48 | Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including of priming coat with primer of approaved brand and manufacture of paints Aqualac, Burger,Johnson & Johnson, Nichoson (J&N) Golden after thoroughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 49 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (One point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (One point eight liters per ten square metre) of approved brand and manufactureICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make on new steel and new steel surface under coat with ready mixed paint brushes to give an evan shade including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 50 | Structural steel work riveted, bolted or welded in builtup sections,, made of TATA/JSW/SAIL in trusses ,rafters and purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 51 | Providing and fixing MS railing for stair case having balluster of 19 x19(ninteen into ninteen) millimetres M.S. solid square bar with a clear height of 85(eighty five) centimetres embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40x6 (forty into six) millimetres size complete with a applying priming coat of red lead paint as per drawing specification upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 52 | Providing and fixing 75x65 (seventy five into sixtyfive)millimetres second class Teakwood rounded hand rail over M.S. flat 40x6 (forty into six) millimetres welded to the balluster in strasecond class ght length complete in upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 53 | Providing and fixing railing for ramp having 50 (fifity) millimetres dia & 3.6 (Three point six)millimetres thick M.S. hollow pipe hand rail of TATA/JINDEL make slip resistant with round ends in straight length over 25(twenty five) millimetres dia x 3.2(three point two)millimetres thick M.S.S. pipe blusters welded at top including one coat of red oxide priming coat complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 54 | Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet made of TATA,Durashine in roofing with hot dipped matallic Zinc coated sheet with the top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns 5 (five) micron over five micron's primer coating to back coat of polyster over 5 (five) microns primar coating including fixing with pre painted iron J or L hooks, bolts and nuts 6mm (six milimeters) dia meter with prepainted limpet and rubber washer complete with all accessories as equired as per the direction of Engineer-in Charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 55 | Providing and fixing ridges or hips with proper gola 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/Durashine Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 56 | Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA/ SAIL/ JSW make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 57 | Providing and fixing GI chicken wire mesh of approved make and gauge ,fixed with G.I staple including of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing glass wool insulation of approved make and density, of specified thickness, placed in cavity between inner and outer leaves of cavity wall, including cutting to size, placing in position and making good, complete as per direction of Engineer-in-charge. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 59 | Providing and Fixing M.S. 75x125x4(seventy five into one hundred twenty five into four)millimetres RECTANGULAR HOLLOW SECTION rain Water Pipe including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including cutting to size, placing in position with G.I. Clamps and making good the wall etc , complete as per direction of Engineer-in-charge. including carriage of materials in all leads lifts and as per directions of Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 60 | 6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 61 | 15mm (Fifteen millimetres) cement plaster in single coat on fair side of single or half brick walls for interior plastering including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six sand) upto all floor level in all heights and curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 62 | 15mm (Fifteen millimetres) cement plaster in single coat on rough side of single or half brick for interior plastering including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six sand) upto any floor level in all heights and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 63 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including testing of joints etc. complete : 250 mm (two fifty mm) diameter, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 64 | Making plinth protection with local stone / slate embedded in 50mm (fifty millimeters ) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm nominal size) over 75mm (Seventy five millimeters )thick bed of dry brick ballast 40 mm(forty millimeters ) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 65 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 66 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, No. NO. 20004/20012 in white shade of Hindware or CERA or PERRYWARE with 10 (ten) litre low level snow white P.V.C. Twin flushing cistern of COMPASS Cat. No. S1053106 \\"S\\" trap with ceranglo deluxe seat cover of snow white shade of CERA/ JACQUAR(with fittings, accessories and flush pipe), with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 67 | Providing and fixing viterous China wash basin DUNE CAT. NO-10186 WITH PEDESTAL CAT NO -11003 in white shade of superime quality including all accessory including cutting holes & making good the same and carriage of materials within all leads lifts upto all floor levels in all heights/ depth as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 68 | Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS- 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 2025 (25 mm OD ) pipe including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 69 | Providing and fixing Polyethelene-Aluminium PolyethelenePE-AL- PE Composite Pressure Pipes conforming to IS- 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply,capable to with stand temperature upto 80°C, including all special fittings of compositematerial (engineering plasticblendandbrass insertswherever required)e.g. elbows, tees, reducers,couplers&connectorsetc.,with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of theEngineer-in charge. INTERNAL WORK - EXPOSED ON WALL 2532 (15 mm OD) pipe.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 70 | Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of 25 mm (twenty millimeters) nominal bore of ZOLOTO including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and t he direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 71 | Providing and fixing 15mm (fifteen millimeters) nominal bore ball valve (brass) of ZOLOTO High or low pressure, with plastic floats complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 72 | Providing and fixing flexible connection pipe with brass unions : 30 cm (thirty centimeters) length 15mm (fifteen millimeters) nominal bore of FINOLEX/SUPREME/JAQUAR including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 73 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 74 | Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 75 | Providing and fixing C.P. brass bib cock Cat no.OPP -15037PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 76 | Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of jaquar or equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 77 | Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 150083KN Stop Cock of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 78 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass (ENOTICA)of approved quality complete with 6 mm (six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 79 | Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 80 | Providing and fixing toilet paper holder C P Brass Paper holder of JAQUAR(ACN-1151N including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 81 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 82 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm (four hundred fifty milimeters) long towel rail with total length of 495 mm (four hundred ninty five milimeters), 78 mm wide and effective height of 88 mm (eighty eight milimeters), weighing not less than 170 gms (one hundred seventy grams) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 83 | Providing and fixing vitreous China Flat back large CAT. NO-60002 SIZE 37.5X39X59CM water less Urinal in White Shade of Perryware /jaquar/ Hindware/ Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 84 | Providing and fixing 110 mm (One hundred ten millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 85 | Providing and fixing 75 mm (seventy five millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 86 | Providing and fixing 110 mm X 90 mm (one hundred ten into seventy five millimeters) make SUPREME/ ASTRAL/FINOLEX pvc floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 87 | Providing and fixing 110 mm X 90 mm(One hundred ten into ninety millimetres) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 88 | Providing and fixing 110mm dia PVC collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST. |
| 89 | Providing and fixing PVC plain bend ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Govt but excluding GST.(i)75 mm (seventy five millimeters) dia. |
| 90 | (ii)110 mm (one hundred ten millimeters) dia. |
| 91 | Providing and fixing PVC single equal branch with oval access door of SUPREME/ ASTRAL/FINOLEX make with insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. (i)110 mm (one hundred ten millimeters) dia. |
| 92 | (ii)75 mm (seventy five millimeters) dia. |
| 93 | Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm (three mm) thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110mm (one hundred ten mili meters) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 94 | Providing and fixing PVC offset 45° (fourty five degree) including fixing with approved adhesive etc. complete. 75mm(seventy five milimeter) dia including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 95 | Providing and fixing PVC offset 45° (fourty five degree) including fixing with approved adhesive etc. complete. 110mm (one hundred ten millimeters) dia including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 96 | Providing and fixing PVC clamps ISI marked of Finolex make of approved design with steel screws and rawal plugs etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 97 | Supplying cast iron cover without frame for manholes for frames of internal dimension 455x610mm ( Four hundred fifity five into six hundred ten millimetres) C.I.cover (Medium duty ) the weight of cover to be not less than 23kg(twenty three Kilogramme) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 98 | Constructing masonry Chamber 60x60x75 cm (sixty into sixty into seventy five centimeters) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm (hundred milimeters) top diameter, 160 mm (one hundred sixty milimeters) bottom diameter and 180 mm (one hundred eighty milimeters) deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm (twenty milimeters) nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve milimetrs) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. |
| 99 | Constructing soak pit 1.20x1.20x1.20 m (one point twenty into one point twenty into one point twenty meter)filled with brickbats includingS.W. drain pipe 100mm diameter and 1.20 m (one point twenty meter) long complete as per standard design. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax and other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender